Community Brag Posts

Antique Armoir

Submitted by George R S on Sat, 02/01/2014 - 19:11

This is the first furniture project I have built from a plan found on-line - at Ana's Website. The plan was very easy to follow and I thoroughly enjoyed building this piece of furniture. I made some alterations to the upper cabinet as per shelving. I used an antique finish to match my bed. The match and design is perfect!

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Behr primer and paint in one. Oil based walnut antique gel. Silver acrylic paint. Water based satin finish varethane.
Recommended Skill Level
Intermediate

Comments

Farmhouse X Coffee Table

Submitted by Loaded918 on Fri, 01/24/2020 - 17:09

This was my first woodworking project, and it turned out really well. I am going to have to make all of the matching furniture to go with it as well now. My wife has been pushing me to find a hobby (probably to get me out of her hair), and it looks like I have found the one. Did this one with just a circular saw and a drill, now it's time to get a Kreg Jig. Also need to find a way to make my cuts a tad bit straighter as well, but I hope this soon leads to me getting a miter saw.

Estimated Cost
$36
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Mission Oak by Miniwax
Recommended Skill Level
Beginner

Comments

Sylvie's coat tree

I built my daughter a coat tree from Ana's plans and it looks basically just like Ana's-even the same color. My daughter-in-law saw it and wanted one for my granddaughter's room to hold her dressup clothes but she wanted a natural look, instead of painted and her room is basically natural wood, red and white so this is what I came up with. I would never have even known I could build a coat tree if I hadn't tried Ana's first!! This one was super easy and cheap, made mostly with scraps and some varnish I already had. I had to buy the balls, dowel and letter S.

I would encourage anyone to build one of these if they have need of a coat tree. You could even make it adult size if you combined Ana's plans with these plans and screwed in some hooks.

Estimated Cost
about $8.00 if you don't have scraps
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Spray on varnish and acrylic paint for knobs and letter.
Recommended Skill Level
Starter Project

Crayon holder

Submitted by cookiecrab on Tue, 02/04/2014 - 18:56

Had left over 2x3's so I used those. The kids love them!! Easy to make. Cost $10 due to stickers and paint.

Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
spray paint
Recommended Skill Level
Starter Project

4x4 Truss Table

Submitted by BojackH on Mon, 05/02/2016 - 20:08

We needed a sturdy table but didn't want to spend a fortune buying one so decided to take a stab at building one.  Our space isn't too large but also wanted the ability to expand the table with leaves if we have a large crowd.  I built leaves by cutting notches in the horizontal leg 4x4 and then sliding in/out with 2x2's attached (see pic).

I will say it makes life a whole lot easier learning how to use Sketchup or some other design software.  That way you can visualize what it will look like, cuts you need to make especially if you will be deviating from the original post design and don't want to do math in your head (like me).

 

 

 

 

 

 

Built from Plan(s)
Estimated Cost
~$200 for wood
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I used the vinegar/ steel wool solution and then 6 coats of Minewax semi gloss polyurethene. Before applying polyurethene, I used a blow torch on the corners to make some neat burn marks.
Recommended Skill Level
Intermediate

Scrap Wood Barn

Submitted by Anonymous (not verified) on Fri, 09/22/2023 - 08:11

My daughter watched me do another build project and wanted something for herself. We built the Toy Barn from Ana White's plans using only scraps around the garage!

Laura Thompson

Built from Plan(s)

Comments

easiest daybed turned floating twin beds

we love ana's plans, and we love the way this one was executed by the bumper crop. check out more pics of our girl version and how we did it at http://www.iwantbdphotography.com/archives/2661

Built from Plan(s)
Estimated Cost
$90 each
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
none :) gutsy for a kid's room. not sure how they will hold up, but we just love the raw unfinished look
Recommended Skill Level
Intermediate

End table made from pallets (plans included)

Submitted by mtairymd on Sat, 02/08/2014 - 14:58

Building an outside side table out of scrap pallets.

Video of the build:
https://www.youtube.com/watch?v=kVAYXVGiL_8

Drawing File
https://googledrive.com/host/0B21TbB8gGNQbX2dlNGdxR0NuOE0/end_table.pdf

Estimated Cost
$5 for stain and nails - free pallets
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Red Oak
Recommended Skill Level
Starter Project

Purple chicken ark w/ retractable wheels

Submitted by Anonymous (not verified) on Sat, 05/07/2016 - 16:59

We worked on this project on and off for a couple weeks.  60 degree angles were the hardest part.  Decided against adding upper coop floor to minimize cleaning.  Coop will only be used seasonally.  End coop is very heavy, so wheels were a must.  Scoured internet and found simple retractable lever design with bolts to adjust wheel height.  Very happy with project, thank you Ana!

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Farmhouse Coffee Table

Submitted by cabinK on Wed, 02/05/2020 - 17:42

Had a great time building the Farmhouse Coffee Table plans from Ana! As with the Farmhouse Queen Bed, I used the old barn wood, ran it through the planer until I liked the look of the grains and then built away. I haven't decided on a finish yet but I'm more than likely going to epoxy the top only, so as to protect it from drink spills and water rings.  THANK YOU ANA!!

Estimated Cost
Screws and glue
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
None as of yet. Will probably use tabletop epoxy.
Recommended Skill Level
Beginner

Kentwood Bookcases

Submitted by tglife on Fri, 04/27/2012 - 09:30

When I started my blog This Girls Life ( t-g-life.blogspot.com ) I knew I wanted to makeover my office to give me more room and storage. These bookcases were perfect for that.

Estimated Cost
$120ish for both, $60ish per bookcase
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax English Chestnut
Recommended Skill Level
Beginner

Modified Husky Farmhouse Table

Submitted by Doro.marie on Tue, 02/11/2014 - 04:28

My husband Chris and I have been planning for a few years now to build a farmhouse table for our home. Every year for christmas my mother-in-love (mother in law) gifts us a "must have" tool. We like to think of it as her investing in our home and quality time together. Last year she gave us the Kreg gig, holy cow, that sure is a must have!!! :) This year we received a hand sander. Needless to say we were motivated to start our farmhouse table journey.
We loved the table Ana built for her sister, so we followed the plans almost to a tee. We ordered the turned legs from Georgia. Let me also add that we try to buy everything we possibly can that is made in america, from paintbrushes on. I encourage everyone to take the a few seconds to look and spend an extra dollar or two to support america's economy.

The only modification we did to the plan was add a small strip of wood to the base layer for just a little extra touch of character. :)

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Table top- miniwax wood conditioner, Early American stain, and helmsman spar urethane.

Base- early american stain for base layer, Old Fashion Milk Paint in Buttermilk, and spray on polycrylic.
We live in a small town and were not able to find gel stain anywhere. We could have ordered it online, however we adamant about using our snow days to work on this project. This made a difference as far as how the milk paint chipped on the legs. I had to hand sand to get the rustic look, however it still looks fabulous. :)
Recommended Skill Level
Intermediate

Comments

Outdoor Sectional

Submitted by Angel2b on Tue, 05/10/2016 - 16:22

I enjoyed this project. Easy instructions. Great results.

Estimated Cost
$180 I brought the cushions %75 off at Walmart last year.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Behr premium plus (Ultra) - stain-blocking paint & primer in one
Recommended Skill Level
Beginner

X-coffee table

Submitted by Anonymous (not verified) on Fri, 02/14/2020 - 11:16

We also made one with hydraulic life so table top come up and forward

Finish Used
Expresso

Lemonade Stand for Fundraiser

One of my daughters recently was diagnosed with Type 1 Diabetes. We are raising money to get a Service Dog for her and I was able to throw together this awesome Lemonade Stand from your plans, Ana. Thanks for the fun and QUICK project that will hopefully help my daughter with her fundraising goals. {Son not included with lemonade :)}

Gene

Paint stir stick Letter Bin

Submitted by ltl_lisa on Sat, 04/28/2012 - 18:16

I used paint stir sticks as the front of my bins!
I wanted the "bead board" look but to still have a natural wood grain that I could stain for the rustic look. I also really like being "frugal"

Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Starter Project

Pretty, massive coffee table

Submitted by sgilly on Sat, 02/15/2014 - 08:48

I'm still helping my kids furnish their new home. They "hired" me to build them a massive coffee table for their family room. They fell in love with the legs featured in a plan built by Shanty 2 Chic (http://www.shanty-2-chic.com/2013/11/diy-square-coffee-table.html). The legs definitely were the most expensive part of this table!
I made a couple of adjustments: because these kids of mine hope to have kids of their own soon, and the table measures 48x48, I reinforced the lower shelf of the table and the table top with support pieces. I picture babies crawling all over this and wanted to ensure that it would hold up!

I finished with the same steps used by Jen of House of Wood's rustic yet refined finish, but used a dark walnut stain as the base.

Another fun project for me, and they are very happy with it!

And, I just have to say that Osborne Wood products delivers a wonderful product with great follow up and customer service! http://www.osbornewood.com/

Built from Plan(s)
Estimated Cost
$250 for table - the Legs accounted for $160 of that.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Wood conditioner (2 coats), sand, Minwax Dark walnut, Minwax weathered Oak, sand, rubbed on whitewash (old, diluted white paint), sand, mixture of weathered oak and a little dark walnut, sand, 3 coats of polyurethane, satin finish, sanding between coats.
Recommended Skill Level
Intermediate
Back