Community Brag Posts

This is my first project and I am so happy with it! Thanks for the plans!

You can see my step by step process here:

http://ordinaryhappilyeverafter.com/blog/category/table/

I'm especially happy with how I was able to attach the top to the bottom without drilling through the top. I describe that here:

http://ordinaryhappilyeverafter.com/blog/2012/08/my-table-is-done/

Thanks for the inspiration!

Built this from a couple of the plans on here and ideas I have seen around the web. This is the very first project I did and with plans from Ana White I found it pretty easy to get through the whole thing. I built this to be bar height and now that it is done I might cut it down to be regular table height just because I didn't realize how big it would actually be. But first I will build a couple chairs and a bench to go along with it.

I needed more room, so I changed the dimensions to a 4 x 4 table.  Used the same amount of materials.  I made the side leg measurements 48" wide and the cross braces 45".  My top sheet of plywood is 48" x 48" and the bottom sheet is 48" x 41".  The rest of the leg measurements are the same. 

A little overkill on the screws, but made it extra sturdy. 

I saw this site, copied down the materials list, bought everything I needed and was finished before dinner.  I did it all myself, only had my husband cut the plywood, the rest was all me!  Woo hoo, so proud of myself!

I rough sanded the edges and corners to get rid of any splinters.

Built my wife a bench and coat rack for our mudroom also a bench for garage. 

I think I Iove this bed more than my little girl. It's really a beautiful bed with lots of storage. I put magnetic closures on the insides of the cabinets to hold them closed. I also put the same applique on the headboard as Ana. I looked for a different one, but it's the girliest we could find at the time and my little princess loved it. It's a very sturdy bed. I put a week long project, but again, as I've stated before on other posts, it would probably not take nearly as long if you have help with the building or especially with the kids! When you have to stop every 5 minutes and take care of kids and home, it takes a little longer. All the building mommies out there know exactly what I'm talking about! Thank you so much, Ana, for all you do and for all of the empowerment and motivation.

This was my first woodworking project ever - and am thrilled!! Thank you Ana-White.com!! I needed a beautiful china cabinet for a fraction of the retail cost. Once I found plans on this website, I bought some power tools and got started! I only worked a couple of hours each weekend so it took a while to finish.

I modified the Shanty sideboard and Shanty hutch plans in a few ways: Shorter overall width to more comfortably fit my dining room, shorter height (which I now regret), fewer shelves in the hutch, different method to attach shelves, and added glass doors to the hutch. My shelves were not perfectly flush with the cabinet walls (oops) so I couldn't use pocket holes to attach them. Because I detest traditional shelving hardware, I just secured 1/2-in quarter round to the walls and rested the shelves on that.

For the glass hutch doors, I built frames similar to the sideboard doors' frames -- two frames for each door, for a total of 8 frames. On 4 frames, I used a rabbit router bit to create an inset for the glass I bought and had cut at Lowe's. I secured the glass with glazier's points and silicon caulk, then attached an un-routered frame to the back of each door with screws. I chose to keep the screws on the back visible and accessible so that I could easily replace the glass if needed without destroying the door.

Modern Outdoor chairs. Great plan that I’ve wanted to do for a while. Very easy to execute the cut list and plans as written.

Followed the plans for junior loft bed

I love the legs on Crate&Barrel's Boardwalk Bench, but I was on a tight budget (under $10), so I needed to make many modifications so that I could use the random pieces of wood I had accumulated from my local deconstruction warehouse, including free wood louvers for the slatted shoe shelves. If you'd like to make your own, more photos of my process are on my little blog: http://sunnysideup-stairs.blogspot.com/2014/05/boardwalk-shoe-bench.html

http://www.backyardchickens.com/a/connies-coop

I built this and posted it on 6/8/15 on backyardchickens.com and it has been "pinned" a few thousand times since then... 

I am a teacher and constantly bending over lower desks and I did not have a table to teach off of in the front of the room. So, I built one with Ana’s ideas of a console table with two shelves. I found a link to Kreg from her site and here was this table. I changed the height and width to give proper support of my back (counter hight) and a width that would hold a teacher book. I liked the A-Frame loom and had not built anything like this before, so I learned. I burned the wood for a fun mix of light and dark wood tones. My dad gave me some router bits and I used one to curve the edges of the top, ropy under frame, and shelves. That way all edges are curved for myself and students. I finished it with a coat of poly and a light sanding in between. Thank you Ana for the skills, confidence, and now a love for creating something useful and fun! My students and parents were shocked !! Plus it adds so much warmth to the classroom. Blessings, Jennifer

Our two boys are really starting to get into Legos so we knew we needed a place for them to play (especially after repeatedly stepping on Legos--ouch!). My husband designed this simple plan after looking at some expensive designs online. He cut a small notch out of the top so legos can be pushed into the storage container. We just used a simple under bed storage box, which is great because it is large and holds a ton of legos.

This was my first ever project. I initially intended to use it for office storage but it ended up taking its place in the kitchen - and proving most useful for storage there too!

Stained with Minwax Jacobean. Thank you for the plans!

Mom's Fancy Farmhouse in California King, Glazed.

I used the headboard measurements from the original plan, and the width/length measurements from the California King plan. My first plan was to distress (above picture) and I loved it, but when I brought it downstairs it didnt really match... So I repainted and Glazed :) Not to bad for buying my first "power tool" less than a month ago!!