Community Brag Posts

We used Ana's plans for her Tiny House shelves and the only real difference was that we decided to use slightly thicker wood. We stained the wood espresso and painted the brackets Albaster by Sherwin Williams. 

The longest part of this process was the staining because the sealer took quite a bit of time to dry before being handled, but this was overall a very simple project with not a lot of effort. It just requires patience! 

We couldn't be happier and it was MUCH cheaper than the custom shelves we had quoted! 

Thanks Ana! 

So excited about how good this turned out!!!

Mo Harris

An Outdoor Wooden Cooler is the perfect way to accent any deck, patio, or garage. Can be made from Cedar, Pressure Treated, Cyprus, etc. Sizes can vary from small 28 qt coolers to Large 120 qt coolers capable of holding hundreds of drinks. These coolers can be themed for your favorite sports team, favorite hobby, or anything of your choice. Engraving or wood burning is available.

I modified the rustic x coffee table plans. I did not need a coffee table, but I loved the looks of this plan. I actually needed a TV stand for our basement, so I made this instead. I kept all of the dimensions the same except I made it 4" taller. I also took out the side "x's".
I used regular pine boards from Lowes. I bought a Kreg Jig, Kreg clamp and screws to get started, so my initial cost was pretty high just gathering all my supplies, as this was my first build.I wanted a rustic, worn look, so I chipped the wood, made fake cracks, etc.
I used Minwax Walnut Gel stain, and then went along the edges, over the cracks and knots with an Ebony stain. 2 coats of satin poly.
Can't believe how well it turned out. Next project is going to be the matching end table. Don't laugh at the size of the tv, it is all we have for the basement. We will be planning on getting an 55" for it and the kids to enjoy.

What could be more luxurious than an upholstered leather headboard? The inspiration for the design of this headboard came from the super cool textured wallpaper I recently installed in our master bedroom. See the full tutorial on my blog, The Handyman's Daughter!

Single wide rustic x console table build

I was given old reclaimed wood from a house built in the 40's or 50's. Old rough cut pine 1x12's. I cut the wood to size to match the plans, however, I did have to modify the plans due to the actual true dimensions of the wood. After assembly, I appled 2 coats of shellac to the entire table. It may need a few more coats, but not wanting a glossy finish, I left it alone. Splinters were and are an issue, and the shellac did help to hold down the splinters.

Not having the 2x2 legs required glueing the 1x's together and glueing a veneer to the sides. If i had the legs the project would have taken less time.

i made this king size head board using Ana's website and for the bed frame i used Shanty 2 Chic's website. i just had to convert the measurements to king size when cutting the boards. thats a rustic x leg end table next to the bed, i built using Ana's website also.

Shortened the plan to fit my space. Used Georgian Cherry stain. 

Wishing well back yard art.

Jwrobel904

This was the best piece I have made so far, I had some trouble getting the angles right with the x's but in the end it worked out great and everyone can't believe its just plain old wood! Keep up the great work!

Moving on to the end tables!

This was my first project from Ana's site and I have to say I was quite pleased how it turned out. This is a very sturdy/heavy duty end table that I am sure will last a very long time. I made mine essentially straight from the plans except changed the X's a little bit to compensate for my limited miter saw.

This was the first Farmhouse bed I have ever built!  I am totally in love with it!  I found the plans very easy to understand and follow.  I used the Twin Farmhouse bed and adapted it for a double and also added some trim details in the head and foot boards.  I also changed the way I attached my bed frame as I wanted to be able to take apart easily if ever needed.  So I used 2 by 10s and attached them to my posts.  I also made a trundle for underneath it. Finally totally complete!!  Love the way it turned out.  

This was the nursery armoire design we used. My husband modified it slightly. Beautiful isn't it.

I had left over wood from previus projects and needed an entry bench. The closest i made my plan inspired by the spa bench.

This was the second double x bench that I made.  It was very simple to make.  It took me around 3 hours to build it and another 2 hours to sand, stain and paint it (this does not include the  1 hour between coats that I allowed them to dry).  I used Annie Sloan Old White Chalk Paint and General Finishes Java Gel stain.  Annie Sloan Chalk paint does NOT need a topcoat if it is being used outside.