Community Brag Posts

Doll Farmhouse Bed

Submitted by rpd on Sun, 12/18/2016 - 23:57

Made for my grand daughter.  It was too cold in the shop to use carpenters glue, so I used medium thick, gap filling CA (cyanoacrylate)glue, and brad nails instead of screws.

 

Estimated Cost
$10.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Watco Golden Oak
Recommended Skill Level
Intermediate

Dog crate end table

Submitted by ktondryk33 on Mon, 08/31/2020 - 17:28

Dog crate end table

Estimated Cost
65.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Farmhouse Bedside Table

For the 7 years I have been married to my lovely wife we have used an old 70's bedside table and some Rubbermaid boxes as our nightstands. It was time to give my wife a nightstand that she would love. With the help of the Kreg Jig, a new table saw and some trials and tribulations in staining, I have given her a special treat. Best part: She loves them!

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Beginner

Comments

Jake

Tue, 11/20/2012 - 02:11

You did a great job on the night stands. What did you use for the legs? They look like 2x2s but where did you get them?

Scott Kershaw

Wed, 01/02/2013 - 01:47

Funny enough the legs are ripped down to 2x2's but they started as 2x3's. The 2x3's were cheaper at my local big box joint. What was nice about ripping them down on the table saw was that I could get a nice square edge on everything unlike just throwing a off-the-shelf 2x2 on there with their inconsistent rounded edges.

Balin Console Table

Second Ana White build!

Built from Plan(s)
Estimated Cost
$150-$175
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Console was painted Antique White and covered with Asphaltum glaze.
Recommended Skill Level
Beginner

Comments

kristyzed

Mon, 08/08/2016 - 16:16

You did a lovely job on this, I think it's my favourite of all of them.  Where did you find those knobs?  Is there a special technique you used for painting and glazing?  It looks like it might not be even everywhere but have a more random pattern to it.

Farmhouse Table and Benches

Submitted by Darrin Dee on Fri, 12/23/2016 - 11:09

I built this table for my wife for Christmas.

Estimated Cost
Less than $150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rust-oleum Weathered Gray stain for the tops.
Rust-oleum Antique White for the rest.
Rust-oleum Triple Thick Polyurethane in clear satin
Recommended Skill Level
Intermediate

Modern Adirondack Chairs

Submitted by Anonymous (not verified) on Fri, 09/04/2020 - 07:59

Ana,

I needed to replace some old dark adirondack chairs to match a pine table. I was about to order them but with Coivid there was going to be a long delay, so I decided to build them.
Your plans were perfect, easy to follow, I built (4), production got easier with each one and learned some new skills.

Gratefully,
DS Humarock, MA

Estimated Cost
$50 per chair
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax - Clear Gloss Spar Varnish
Recommended Skill Level
Beginner
Seasonal And Holiday

Fancy X-Table & Vintner's Hutch

Inspired by the Fancy X Table plans, this table was made from scraps of thresholds and door frames. The table legs were made from the runners and deck board from shipping pallets.

The Vintner's Hutch was created by re-purposing fencing for the wine rack, decking for the buffet top & pallets for the buffet itself.

The little guy featured in the additional pics is a twin to another accent table. All three tables can now be joined to make one 12' long table for the ultimate family feast. Magnets are used to make the connections!

It is an honor to post these on the Brag Board since I was inspired by the old "Knock-off Wood" to start building furniture 18 months ago as a way to bring in income and help pay for my wife's MS medicine. A humble and sincere "thank you, Anna" for reminding me that , even if I can't do much, I will never be accused of not doing what I can. You've inspired me to stop feeling sorry for myself when money was tight and collectors were calling. Now I proudly own Chucked Wood; where old pallets go to live!

Here's to life...

Cheers!

Cory
www.facebook.com/chuckedwood/

Built from Plan(s)
Estimated Cost
$30 in screws, wood glue and some hardware
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax's Red Oak stain
rust oleum ultimate polyurethane - Matte Finish
Recommended Skill Level
Intermediate

Comments

spiceylg

Wed, 11/21/2012 - 14:51

What a nice post and beautiful builds! Keep up the great work and best wishes in your endeavors.

Cory Phillips

Thu, 11/22/2012 - 20:08

Goodness Pam, I really appreciate your kind words. I am always floored by your brag posts!

Cheers!

CP

Juanita_r

Thu, 11/22/2012 - 19:09

Makes me want to sit down there and enjoy the company of great friends and some wine, cheese and some fresh crusty bread. amazing!!! Your wife is very lucky to have you!

Cory Phillips

Thu, 11/22/2012 - 20:09

I'm blessed to have her. As cool as Anna is, Shelby has taught me how to be authentic, sincere and thankful for the small stuff.

Cheers!

CP

Juanita_r

Fri, 11/23/2012 - 02:08

Makes me want to sit down there and enjoy the company of great friends and some wine, cheese and some fresh crusty bread. amazing!!! Your wife is very lucky to have you!

Corona Square Coffee Table

Submitted by KevinBrown on Sat, 09/06/2014 - 12:54

This was my first handmade diy furniture project ever.  It turned out much better than I anticipated.  The lumber store that I used did not offer knotty pine in 2x6 dimensions so I improvised with 2x4s.  This project was a little time consuming due to the fact that I am a complete novice and I had to gather all of the necessary tools and learn how to use them.  Everything considered I am very happy with the result and I really enjoyed this project.  

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dark Walnut Wood Stain
Polyurethane Matte Finish
Recommended Skill Level
Intermediate

Comments

Computer Desk

Submitted by mjgreene79 on Mon, 12/26/2016 - 10:29

I made this computer desk for my college age daughter out of a 150 year old door that we got from her grandfather's homestead.  I think it turned out fantastic.  I need to add a glass top to complete.

Estimated Cost
$50
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
painted legs and base but left the door the original.
Recommended Skill Level
Beginner

My finished flip top console table

Submitted by Janettx on Sun, 11/25/2012 - 06:36

What a fantastic fun project. I spent more time on the finish than I did building this piece. I used outdoor rail posts for my legs because it's all I could find. These rails were larger than the 2x2 required so the back top board had to be a 1x6 to accommodate for this size leg. Besides the narrow hinges I also used some supports under the top so the top would stay up when opened. I didn't want any tiny fingers getting smashed.
I am thinking of doing this one again but altering it to be a sewing machine table. I'll post a picture if I am successful.
Thank so much for the fun project.
Janet

Estimated Cost
50.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Paint and stain
Recommended Skill Level
Beginner

DIY_Women Owens Nightstand

Submitted by diy_women on Mon, 09/08/2014 - 08:39

This piece came out beautifully! Took all of 6 hours to complete it. I used pine on this project.

Built from Plan(s)
Estimated Cost
Cost about 75 dollars.
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Polyurethane.
Recommended Skill Level
Beginner

Modified Industrial Style Coffee Table w/ Bottom Shelf

Submitted by danandbeth on Wed, 12/28/2016 - 08:36

Our first project!

 

We used the "Industrial Style Coffee Table as seen on DIY Network" plans and simply added a bottom shelf. This required an extra 2x2 bracer (same cut as top bracer) and 8 more 1x4s, cut slightly smaller than the top 1x4s in order to have them sit flush with the bottom 2x2s. The table is all pine.

 

We spaced the bottom shelf boards roughly a half inch apart (give or take - it's "rustic"!) and screwed in from the bottom just like the top boards. 

 

On the top shelf, we used 3 coats of Minwax Natural stain, and followed up with 3 coats of Minwax Satin Poly. We sanded these after attaching to the frame in order to achieve a level surface. We started with 80 grit, then 120, then 150. We then used 220 in between coats of poly. The result is a smooth, but not store-bought smooth surface, which we think works well.

 

We didn't spend as much time on the bottom shelf since they'll be mostly storing items, giving them just a quick 150 sand prior to 2 coats of stain and 2 coats of poly. Finally, we nailed in some plastic feet to keep it about a half inch off the floor.

 

All in all, being our first project, and going beyond what the original plans called for, it took us a few weeks to complete, working on it mostly on weekends and here and there in the evenings after work. We love the finished project and it works really well in our living room!

 

-Dan and Beth

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Natural Stain (Minwax)
Satin Poly (Minwax)
Recommended Skill Level
Beginner

Over the Bed tree house

Submitted by AbbaZabba on Mon, 09/07/2020 - 12:22

The directions on this aren't very clear and there's a few that I think are off all together. It came together fine with some adjustments and the kid like it so alls well that ends well, I guess.

Built from Plan(s)
Recommended Skill Level
Intermediate

Vintage bar stools

Vintage bars stools made for our kids ages 4.5,2.5, 1 (hence the reason they are high) the kids love them and I love the price tag! Around $15-20 each to make.

I left off the decorative corners.

Estimated Cost
less than $60
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
just white paint - as I found out I'm pregnant and can't stain anything. I really wanted them distressed but didn't wanted them unfinished for months because I already have a two page list (and growing) of all the things hubby has to do.
Recommended Skill Level
Beginner

Comments

square x coffee table

Submitted by Alongwell on Thu, 09/11/2014 - 06:41

I loved this table so much but needed it to be a lot larger. It's 9 2x6s wide X 54in.There are also 4 1x12s as the bottom shelf. I used the steel wool and vinegar as a finish and had to paint on some black tea also to get it to change color and then finished it with a few coats of poly. This table fits so great in my space I am super happy I found this site! 

Built from Plan(s)
Recommended Skill Level
Beginner

Kitchen island

Submitted by Anonymous (not verified) on Fri, 12/30/2016 - 11:27

Weekend project worked out well. Also made the tall bar stools also found on Ana White! Topped with a granite countertop. In the middle, I went with a double trash can sliding cabinet. 

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Advanced

Comments

Back