1. Home

Community Brag Posts

Built in Armoire (linen cabinet)

Submitted by cesqueda on Mon, 11/03/2014 - 08:46

I modified the original plan so that it would fit in the area wher my old linen cabinet was.  I also wanted the drawers to be visible.

Built from Plan(s)
Nursery Armoire Plans
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Antique: I stained dark, rubbed the edges with wax. Then put two coast of white flat paint. I then put on a faux brown glaze. The last step was to sand down the edges and remove a little of the glaze with a high grit sandpaper.
Recommended Skill Level
Intermediate

Comments

Laundry Station

Submitted by Anonymous (not verified) on Sat, 11/07/2020 - 10:17

My first project, something I took on with my kids. Lots of fun, errors, and lessons learned. Used an hvlp for stain and poly, so much faster and easier than brush or rag staining.

Thanks for the inspiration and instructions.

Built from Plan(s)
Laundry Station
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Special Walnut
Recommended Skill Level
Beginner

Comments

Rustic logo end table

Made a gift for a Knicks lover. Used a dremel trio to etch in logo. Went back and forth on adding color and in end decided not to. But gave me another idea on my next logo table

Built from Plan(s)
Rustic X End Table
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Min wax special walnut
Recommended Skill Level
Intermediate

Comments

ekimwa

Thu, 01/10/2013 - 17:54

Now that's cool!!! Need a tutorial on how to do that!!!

Corner Cabinet

Submitted by T-Dan on Sun, 02/12/2017 - 13:02

built to fit messy corner.  wife loves it there!

Built from Plan(s)
Corner Cupboard
Estimated Cost
$105 for wood and I had the stains and screws from previous projects. Fixtures (some yet to be installed), were about $20.
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
mixture of walnut and gray stains, with polyeurethane topcoat.
Recommended Skill Level
Beginner

Comments

Wooden chaise lounges

Submitted by CarolinaL on Wed, 11/11/2020 - 13:44

I didn't realize how expensive pool loungers were. Thank goodness for Ana White! I modified the size to 73 inches long and 22 inches wide so they would be a good fit for the cushions I got from lowes. Something to take into account is that the 2x4 won't be able to rest on the back legs when you use the 2x6 on the sides. There is no way to get it in. I didn't realize until I had built them but I just cut two pieces of 2x4 at 3 1/2 inches and placed it on top so I can rest the back all the way down. Love the end result!

Built from Plan(s)
Simplest Wood Chaise Lounge Chairs
Estimated Cost
$160 including stain and screws.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Provincial
Waterbased sealer-- will redo next time with oil based.
Recommended Skill Level
Intermediate

Comments

Farmhouse Table

We recently moved from our small Minneapolis Bungalow to an apartment in Maryland. It was the prefect opportunity to build the Farmhouse Table plans I had been admiring. When we went to my parents farm in North Dakota for Thanksgiving we spent a couple hours digging through the barn to find old barn wood for the project. The wood then made the 1,400 mile trek to our new apartment in Rockville. Yes, you read that correctly…the table was built in our carpeted apartment! No excuses people…you can make this table in your apartment! If you do not have access to a saw your local big box home improvement store can make the cuts for you. If you go that route the cut list Ana has will come in very handy!

I do a fair amount of woodworking, so I was able to complete the project in one day. If this is your first project I would allow a weekend to finish it.

Blog Link
North Dakota Barn Wood Farm Table
Built from Plan(s)
Farmhouse Table - No Pocket Holes Plan
Estimated Cost
$80
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Danish Oil Natural
Recommended Skill Level
Starter Project

Comments

rhettar

Sat, 01/19/2013 - 04:41

It's also nice to see the table up against the wall, because I have been thinking of doing the same thing, I live in a small mobile home, just a small kitchen.

Farmhouse Table

Submitted by jjack7 on Sun, 11/09/2014 - 05:52

Farmhouse Table with some slight modifications for sturdiness.

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Pre-conditioner
Minwax Jacobean
Minwas Semi-gloss
Recommended Skill Level
Starter Project

Barn with lean to

Submitted by Anonymous (not verified) on Tue, 02/14/2017 - 19:20

When we wanted a barn for our children to play in and use for their farm we discovered that nothing could be found to fit our fancy online. So with the use of some pictures of old barns and basic ideas we started on our very first wood project. Our tools consisted of a sawzal a table saw and cordless set of tools. Many hours later we have this to show for it. We used lots of scrap wood and bought only the hinges, latches and one sheet of plywood so our costs are skewed from someone trying to do it with new material.

Estimated Cost
$50 and possible as high as 120 for new material
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Paint and clear coat. Some of the trim is painted which requires taping to get the crisp edge.
Recommended Skill Level
Beginner