DIY Greenhouse and Outdoor Chair Built with Leftover Wood
Made to the basic design for the outside patio chair. With a few modifications due to utilizing all the scrap wood from the greenhouse.
Welshsmoker
Made to the basic design for the outside patio chair. With a few modifications due to utilizing all the scrap wood from the greenhouse.
Welshsmoker
We followed Ana's "Toddler's Upholstered Bed" plan nearly exactly. The only major change I made was to add fancy looking french country legs I found at the local hardware store. They were screw in, so I used metal screw guides that popped right in after a little pre-drilling. I included some pictures to help explain this variance to help give others ideas. Thanks so much for these plans Ana!
Took a couple of weeks to complete but, hubby only worked on it in the evenings after he got off work. He had trouble finding untreated 4x4s so he glued untreated 2x4s together (which took extra time waiting for the glue to set up and dry). He used paint grade pine wood so our cost was a little higher than what was estimated. We ended up having around $350 in it after buying paint and everything. Overall, he said it was a fairly easy project.
Made this over a weekend. It did take a week to apply the final finish to protect it.
My wife wanted a fire place in our new home. Ana’s plans were perfect. Challenged a bit by the vaulted ceiling, but with Ana’s plans, it was very doable. My wife loves her Christmas gift.
Angel
For my sons airplane/helicopter Birthday I painted murals on 2inch thick cardboard. three mnths later they are still in the back yard, the cardboard has been rained on as well as the sprinklers have watered them almost daily and as you see they're still intact. so i decided to build them a frame out of pallet boards and hang them on the wall in the backyard. Since I used pallet boards, nails i already had, and remaining spray paint I have from my tractor tire project. This project cost me practically nothing, had to by anchor screws to hang..
This Rustic Table was built by my just-turned-15-year-old, Joey. He is amazing!
Joey is a Kreg Jig pro (and an engineering marvel) and this table is rock solid. The only change he made was the direction of the table legs (per my request) and he tapered the legs as well.
I finished the table using Ana's directions: http://ana-white.com/2013/05/staining-and-finishing-tabletops As a stain and poly novice, these directions were a life saver!!
Learning lesson: When I applied the stain (in several coats to match my cabinetry), I was nervous and patient. Then, I built up my confidence and decided to apply a very thick coat of stain. Don't do that; it was a sticky mess! I searched online and lots of people said that I would have to start over. Don't do that, either. One person (thanks to him!) said to be patient and wait it out. Fwew! So, I moved it onto the screened porch (and turned on the overhead fans) each day so that the warm Florida air could help dry it out (alternatively I imagine you could leave it in the house with some fans blowing across it). It took about a week of waiting (ugh), but it dried (yay!) so that I could apply the Spar Urethane.
Must do: Ana suggests using Minwax® Water Based Helmsman® Spar Urethane for a top that will tolerate water condensation, milk spills, etc. I did this and have no worries that my son's project will be ruined. This table is going to last!
The bench was also an Ana design. It was a really quick project.
Thanks so much to Ana for having these accessible, free plans. I could never have afforded a table of this substance and we are SO proud to tell visitors about Joey's Table when they ask.
Holiday Table by Ryan B
Modified the Twin Farmhouse Bed slightly to meet the needs I felt were necessary for my 2 year old daughter.
I put the side rail cleats as low as possible to minimize height. I totally left out the Rail Supports for Footboard/Headboard (Part M), as they are unnecessary. I also added three center supports using 2x4 joist hangers. On the headboard posts I added two blocks to make assembly easy and uniform. The bed comes apart in 4 pieces and is easily put together by one person using screws. I will take more pictures if anyone has questions about anything.
Building the different pieces took roughly 6 hrs as I'm a little OCD. Finishing took a ton of time. I only have a palm finishing sander so I first sanded with 60 grit, then 120, then a final 220 (220 was recommended by Minwax). Finishing was time consuming as I had to finish one side of each piece at a time due to space limitations.
Minwax water-based stuff is a little tricky with pine as it causes "grain reversal" which is fine for me because I like the look. I think it was really designed for oak or other denser woods.
Tip: Use a low-profile box spring.
Wed, 08/29/2012 - 12:34
I would love to see more pictures, especially of how you built it to allow for disassembly. Soon I plan to build this for my almost 2-year old son. When you get a chance.
Thanks!
Made 4 of these garden boxes for the side of the house. I love how they turned out and it was easy to change the size of boxes just by changing the side lengths. I love the trim on the top. It makes them look so much more finished. Can't wait to fill them.
I loved this table but I knew I wasn't going to get the X right so I skipped em ;-) wish I knew before I had to shorten all the dimensions what a pain putting those 2x4 supports in would be!!! Used 1x10 for shelves and was quite a process trying to secure those!
I used a watered down white latex paint all over then 1 coat of weathered oak stain
Built using the farmhouse table plans
Added this easy to do built in fireplace to a plain, ugly wall. Now it’s just….WOW! Thanks Ana for the idea and inspiration. DIYers 🤘
This one started out in a lovely whitewash...then Kids happened.
Very easy plan to put together, my little client loves it!
Tue, 06/19/2012 - 13:11
I like what you have done with this it looks amazing!! (as do you!!)
Well this is my first project and it took me a long time. I have to think way to long before I actually do something. I redrew the drawings to fit my garbage can but it still didn't fit.
Oh well, it was a good idea at the time.
I used a biscuit joiner and glue to put everything together. For the door I used rail and stile bits. The panels are made of MDF, I used a bit made just for raised panel doors on the router table to make them, Oh by the way MDF makes a very big dusty mess, Please wear a mask it has to be really bad to breath.
I also added a slow close piece that is mainly used on kitchen cabinets, I just had to do that and it works very well.
Thanks Ana for such a helpful website
Chuck
Sat, 04/12/2014 - 07:01
You did a beautiful job on this! The finishing is lovely, and those raised panels are impressive!
Thu, 04/17/2014 - 15:51
Thank You JoanneS
I am on my next project now. I need a place to hang my coats and not see all of the shoes, lost almost everything in a divorce including almost all my tools.
LOL
A small price to pay for serenity.
My husband built this bed with hand planed white oak. Such a wonderful addition to her big girl room.
Super fun and easy project! I had to cut down the length of the table to 6 ft to fit the space in the house. I also did 2x8 tops on the bench for more surface area. I will def be building an ana white project again!
DIY Waterfall Console
Loved building this chair. Super simple to put together and very sturdy once everything came together.
I modified it to create a larger and taller chair, using 2x6 and 2x4 lumber. Because of this change I felt like my math challenged brain was completing some sort of quiz, but to keep things simple I cut the pieces step by step recalculating lengths as I went.
I marked up the plan as I went, so if anyone is interested just let me know & I'll add the changes.
http://radcrafter.com/2012/06/simple-outdoor-chair-beefed-up/
Sun, 08/19/2012 - 08:29
I would love to see your changes and build the beefier version! Please share!
Thu, 07/26/2018 - 07:05
I have a large (400+) family member who I need to make chairs for. This plan looks perfect (even though I will have to probably adjust width and add additional support) Can you please send me your plans?
Sat, 08/10/2019 - 21:14
Hi just joined your website. This is exactly what I was looking to build. Any chance plans will be shared?
Thanks.
In reply to Plans on the horizon? by tintin66
Sun, 08/11/2019 - 10:25
Hi, yes, I am planning to update this collection of plans to include the "beefed" up modifications. It may be a few weeks though.
My 15 year old son built this for me!
This was a labor of love for my son’s Christmas gift. He wants to be a chef and all he has wanted was an island in our kitchen. Thanks Ana for such an amazing and simple (enough) plan.