Community Brag Posts

The console is tall, perfect as a serving comsole or for a portable BBQ. I used straight stair baulsters for the feet at 34". Fun, quick project. This was my third Furniture project from the Ana White site.

Clair

woodpaintcreate.com

I built this table from the Tryde end table with shelf plans with modifications. I cut the table top boards from 23" down to 16" and added 2x4 bread boards 1 on each end. I also added a magazine pouch on one side of the table.

I took the suggestions for the Mini-Farmhouse Bedside Table and revised it a little further. First I cut the legs to 18" which gave me a total height of 19". I enclosed the back to avoid looking at the back of the drawer. I covered the drawer with a piece so it overlaps the drawer slot. Worked great at hiding some of my mistakes. From the pics you can see that it sits next to my easy chair in Mi Cueva de Hombre. Great project.

I made this Console following your step by step rustic X console plan. turned out great! I love your site!

I built these benches out of cedar, which added considerable cost to the job.  The total cost for four benches (including stain) was about $240.  I used clear cedar and Sikkens outdoor stain in chocolate brown.  I also modified the plans slightly to create stronger joints, using rabbet and mortise joints and Titebond III (waterproof) glue.  This only slightly changed the dimensions, but I think it will make the benches last for years to come.  It did add some time to the plans, as I think butt joints would've taken only 2-3 hours total before sand and finish. 

All made from pallet wood.

Needed a classy table...

Purchased the chairs separetely. Sanded the legs from black paint back to wood, and stained them to match the table.

8x12 coop modified from your classic shed plans. 2/3 for the chickens, 1/3 for storage.

by Harmony Munson

This is a fun project even for beginners. If you have an interest in building a sandbox, and have some tools, I'm sure you can make this easy enough!

I used 2" X 10" wood for my sides instead of the 1" as the plans call for. This gives extra strength and more depth. When you use 2" wood, you will have to turn your 1 X 4's the other way to match the 47½" width, because with the added width of the 2 side boards, your new width is now 49¼". It's not difficult, you just have to match your 1 X 4 X 47½ boards to the proper width. It will turn out fine, they just won't match the plans or pics of those using 1 X 8's for sides.

Sorry, I'm delivering this to my grandson's house for his birthday present, so no sand, but use landscaping cloth under this sandbox, then fill with sand.

One other thing, I'm toying with the idea of matching the angle the backrest is at and re-cut new pieces of 7½" arm rests. I think that may look a little better than the rectangle blocks.

My added pics are as follows:
1. The side boards all cut, and sizing up the frame.
2. All other boards are cut; I laid them out for fit before screwing the pieces together.
3. Using a square will help you keep everything at the correct angles. Also note in this picture and the next where I used two ½" pieces of wood I ripped to keep the ½" spacing uniform. Just rip any wood to the ½" width, make 2 pieces and butt against the next board on both sides, then screw them down. Makes it VERY easy to keep a uniform gap.
4. This picture shows me using the same "spacer" when putting the hinges in place. The red arrow points to the wood spacer.
5. The first bench is complete, and working fine!!

With the wood I used in my project, I used 2½" self tapping deck screws for the frame and attaching the 1X4's to the frame; I used 2" galvanized for attaching the 1X4's to any 2X4's; and for the hinges, I used ¾" wood screws. Using these sizes prevented the screws from coming through the other side.

I bought everything needed in this project at Lowe's and it was under $90 in costs; this is all the lumber (upgrading to 2 X 10's), hinges, screws, and handles.

I had searched for a nice bed frame for the longest time. I wanted something that would last and the prices in furniture stores or antique shops were crazy. I found the plans for the platform bed/headboard and modified them a little. I used 2x12's for the frame and set my 2x6's down inside for my box spring. 2x6's for the headboard and trimmed it the same way as in the plans. I love it. Thanks for the plans Ana.

My daughter and I built it together. We had great fun. She is totally into the Kreg Jig and the brad nailer now. I'm sure we'll find something else to build. What a great father daughter activity. Thanks for the plans!

I love the outcome of this project! I removed the old wire shelving and used 3/4 inch sanded plywood and few pieces of trim and pine to build this floor to ceiling custom closet. Then I primed and painted, and installed the clothes rods. Out of the frame are new recessed lights and a tile heated floor!

Laura E.

I Loved this plan ever since the first day I saw it! I was very intimidated though by the star cut out.

I modified this plan a little, mine is about 6 inches taller than the plan, because I had to fit my daughter's Pottery Barn kids washing machine inside which I believe is bigger than the machines in the original plan. My middle shelf is only about half the width of the shelf pictured, I wanted to add extra space beneath, plus it was the cheapest piece of shelf I found.

For the star cut out, since I did not have a protractor, I cut out little templates with my miter saw at the different angles, I labeled each piece, so I could reuse them if I ever build another one. My daughter loves this wardrobe, so does my son! I am planning on making this again for my son, but making it grey and calling it a "Hockey Locker". Thanks for the plan Ana! This is my favorite plan so far!

First time project, this was a birthday present to the wife. Good project and a very good build. I only modified the length and went with 3 2x10s instead of one. Nice big table that we hope to enjoy for years. The entire table is distressed and we actually went with two stain colors. Dark Walnut on the top and an Ebony on the base.

so I tweaked this plan and made it a double bed for our spare bedroom.