Community Brag Posts

Farmhouse head and footboard

Submitted by Anonymous (not verified) on Sun, 03/06/2022 - 18:33

Still need to paint it. Perfect weekend project. Such an easy build! Thank you!

Built from Plan(s)

Comments

Simple Modern Outdoor Sectional

This was our first project and i gotta say, I love doing this! There are so many ideas on this website!
This was super easy, my husband and I had trouble with some of it because it wasnt fitting right, but we just tweaked it and it turned out perfect!
I had been looking online for an outdoor sectional for months, and the price was too high for us to spend. Our final total was only 238 dollars all together. Store (and bad quality at that) furniture would have cost us over 500. So, I am VERY pleased.
I got the cushions on craigslist. Listed at 8 dollars a cushion. They were still in the wrapping! We have one extra cushion that we plan on making an ottoman soon.

Estimated Cost
240
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Starter Project

Rustic X mixed with a Triple Truss Coffee Table

I considered myself pretty good at cutting and assembling, less when it comes too filling, sanding, and staining. I could not figure out the X for the life of me! Luckily I could figure out the Tuss table :D

Estimated Cost
$80-100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

King Farmhouse Bed

Submitted by DVGofAZ on Tue, 07/21/2015 - 08:58

I followed Ana's Farmhouse bed plans, using 1 x 12 boards for the sides and leaving off the extra piece at the top of the headboard. I didn't want to cover any more of the brick than necessary and I have a large bit of artwork to put over the bed too.

Because my mattress is a Sleep Number bed on a pedestaI I had to add a footboard to keep the mattress from sliding off the end. The footboard is simply a 24x24 section of plywood with wainscoating and 1x2s to match (sort of) the headboard.

Built from Plan(s)
Estimated Cost
$400
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Antique White paint
Recommended Skill Level
Beginner

Comments

Grandy Sliding Door Console

Submitted by Justjoshin on Sun, 02/18/2018 - 05:59

Used this plan and tried to Gary a rustic look. 

Built from Plan(s)
Estimated Cost
$400
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax dark walnut, white pickling stain, and clean poly.
Recommended Skill Level
Intermediate

corner shelf for spring organizing

I built this corner shelf as part of my spring organizing effort. I have to say, that the shelf looks too good to be left in the basement's corner.

Comments

Narrow Farmhouse Table

Submitted by tfox on Tue, 05/31/2011 - 19:49

This is my take on Ana's Narrow Farmhouse Table project. I plan on adding a bench to one side and random color matched chairs to the other.

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Special Walnut stain with six coats of Wipe-On Poly. Finished with steel wool to knock down shine of poly.
Recommended Skill Level
Intermediate

Dog Bed

Submitted by daddydrew on Fri, 07/19/2013 - 12:48

I did this project today with some old scrap that has been sitting around and taking up way to much space! Shotzie got a new bed out of the deal and she is pretty happy about it. I am available to do builds for people who like what they see and dont want to pay retail price for this stuff. check out my profile.

http://ana-white.com/users/daddydrew

Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Minwax Grey oil based stain
Recommended Skill Level
Starter Project

Comments

JoanneS

Fri, 07/19/2013 - 15:19

What a great way to use your scrap wood! Love the color and the design. Looks super!

XL Twin Storage Bed

I took plans from two makers and changed them to fit my needs.

I took the base from the Fix This Build That DIY Daybed with Storage Drawers plans. And I used the headboard/footboard concept from the Shanty-2-Chic DIY Modern Farmhouse Platform Bed plans and made this extra tall, extra long twin size bed.

I made it for a client (friend). It is for her daughter. White washed instead of paint of stain. 

Estimated Cost
$170
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
White wash (watered down white paint) and triple thick top coat in satin finish.
Recommended Skill Level
Intermediate

Ana White Greenhouse

Submitted by Anonymous (not verified) on Wed, 04/06/2022 - 12:41

We built the first one about 8 years ago, and then the wind flipped it over and scattered it all over the back part of the property. I then dug footings and anchored the second one down; I was able to save the Dutch Door I made for the first one. Thanks for the plans!!!

Built from Plan(s)

Comments

Seasonal And Holiday

queen headboarad

The plans on this were so easy to follow. Thanks so much for posting!

I ended up using screws instead of nails just because I am more comfortable with a drill than a nail gun. Seems like it is holding up fine :)

Estimated Cost
60.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
MinWax Provincial. I painted it on and immediately wiped it off!
Recommended Skill Level
Beginner

Finally completed a project of my own!

Submitted by veltch on Mon, 07/22/2013 - 07:29

I was looking to make a planter instead of buying one, and stumbled across Ana's website. This planter looked good and simple. I purchased the Kreg Jig Jr, and a face clamp on Ebay. I know I'll be able to use it for other projects/repairs. Home Depot did no have cedar fence pickets, so used what they had, (spruce), and brushed on some left over pecan minwax stain for contrast. I left everything else the raw, didn't fill in the pocket holes, and didn't use glue on the pocket joints. I did glue the fence pickets to the 1 x 3's and secured them with (pre-drilled holes) 1 1/4 out door screws. I suppose if you had some experience, and were not cutting all your wood clamped to a folding table, you could save some time. This took me just over 3 hours. It looks good. I placed my cleat 11 inches down from the top and lined it with that fabric to stop weeds, and poked some holes in it for more drainage. I may go back and fill the pocket holes with wood putty just to keep the bugs/spiders out.
Maybe in the fall after the tomatoes are done I'll give it the once over with some stain or water seal. This is on my back patio, the wife would already love one for mums out front. Thanks Ana White!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Pecan on fence pikets
Recommended Skill Level
Beginner

Chalkboard Key Organizer

This is a basic key organizer but the big hook it for a dog leash. The sides are routered and the middle is chalkboard paint for writing. A friend just suggested putting a route to hold the chalk. I will add that later. 

Estimated Cost
$3 if you have the scrap and chalkboard paint.
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
I didn't have a finish because it would ruin the chalkboard finish.
Recommended Skill Level
Starter Project

2x4 outdoor furniture collection

Submitted by Anonymous (not verified) on Mon, 04/11/2022 - 18:21

My husband made 4 pieces from the 2x4 outdoor collection. It was his first time doing a wood working project. The step by step plans made it easy and manageable!

Comments

Simple Daybed/Farmhouse-Bed-Hybrid

Submitted by uli on Mon, 06/06/2011 - 08:05

I needed a bed for my guestroom and decided to build a mixture of the simple daybed and the farmhouse bed. The back and the front rail are attached with bed brackets for easy disassembling.

Estimated Cost
175 $
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Acrylic paint in antique white
Recommended Skill Level
Beginner

Comments

Guest (not verified)

Tue, 06/21/2011 - 09:42

Dear Uli, I love the daybed you created and I'm planning to build my own next week for our guest bedroom, which doubles as my project room. Could you tell me what height you made the bed? It looks lower than the average headboard height, but higher than the average footboard height. I'd like to make mine close to your, which I think is just perfect.

Thanks,
Sara

In reply to by Guest (not verified)

uli

Tue, 06/21/2011 - 13:30

Thx :-) I've made the panels 19,5" high, and the legs measure 31,5". On top of the panels I screwed and glued a timber, which is a little bit thicker than a 2x4. So the overall height is 33,5". If you like I could send you my sketchup file.

Uli :-)

Guest (not verified)

Tue, 06/21/2011 - 19:42

Thanks Uli,

Those dimensions will be a big help. I've constructed more than 30 pieces now, thanks to Ana, so it's no big deal for me to design my own plans and dimensions now. I'm hoping to complete this project before my sister comes out for a visit. Wish me luck!

Sara

Miss Martina (not verified)

Fri, 08/19/2011 - 23:58

Hi, Uli! Do you think you could please help me out by sharing your sketchup notes for the "Farmhouse-Daybed-Hybrid"? This would really help me to get a handle on building this project.
Thank you from Martina.
P.S.-Though we now live near Palm Springs, California, we lived in Sachsenhausen for nearly 2 years & office was in Wiesbaden. Though I prefer the climate here, I still miss Germany.

Rockin'Robin

Wed, 06/20/2012 - 21:00

Dear Uli,

I am brand spanking new here on Ana-white and I love, love, love your daybed. I would like to give it a go for my daughters. Is it possible to get your sketch up notes? This will be my first build and I am so nervous about trying something without having a plan in front of me. My email is [email protected]
Blessings, Robin

Guest (not verified)

Wed, 09/14/2011 - 07:56

I would LOVE it if you could send me your sketchup file too. I want to build this for my guest room.

Helleni (not verified)

Wed, 08/31/2011 - 14:27

I would love to make this for my son's room. I am a beginner, can you provide the file for me to look at too?

Guest (not verified)

Fri, 09/23/2011 - 12:39

Uli,

I absolutely love this daybed and have been searching for such a bed, even to buy, but have found nothing. My husband is super handy and loves wood-working, so I think I am going to put him up to the task! :) Could you e-mail me your sketch-up file as well? My e-mail is [email protected].

Also, is there room to put a trundle underneath...this is a must-have for us. Do you happen to have any plans for a trundle? If not, hopefully my husband can come up with something for that!

Thanks so much for sharing your great idea and plans!
Amy

Siobhan (not verified)

Tue, 11/08/2011 - 17:56

Hi Uli,

Would you email me the plans for this bed please? It's perfect and exactly what I have been looking for!

Thanks so much,
Siobhan

kharrel

Wed, 12/28/2011 - 20:50

Hi Siobhan, I was wondering if you could possibly send me the plans for this bed in a Word document or through email. I tried to access the plans you attached above but my computer wouldn't allow me to open it. Also, I saw where someone else asked if a trundle would work with this bed and if you had plans for that, if so I would love to see if we can try to tackle that project as well. My email address is [email protected]. Thank you so much!...you have inspired me!!!!

Cheri (not verified)

Mon, 01/02/2012 - 09:58

I LOVE this bed. Would you mind sending me your sketch up and plans as well? Thanks so much and have a blessed and happy new year!

Jenny Briggs (not verified)

Mon, 01/30/2012 - 06:12

Hi, your bed is beautiful, could you please send me your dimensions, I would like to attempt, making this but kinda do an L, with a twin, and then a toddler mattress, at the head, the smaller mattress, would be like the short side of the L! Very new to this, but I would like to give it a go!

Guest (not verified)

Sat, 02/04/2012 - 09:35

Uli,

I love this so much and as others have said...it is the exact height I think I would need. This is my first solo project (without help from the man in my life) and i would love all the help I can get. Could you send me your plans for the hybrid? email address is [email protected]

Thanks much,
Raven

RachaelA (not verified)

Thu, 04/12/2012 - 10:31

Do you have a mertials list you used to buy the wood, etc for this bed. We are wanting to build a similar bed and add a trundle drawer underneath. Any guidance you can provide would be great!

Rach

RachaelA (not verified)

Fri, 04/27/2012 - 10:54

We figured it out and added one more layer to the project. We are combining the simple daybed, farmhouse daybed and trundle. So far so good.

Kris Frye

Wed, 02/25/2015 - 20:15

That's exactly what I want to do. I cannot download Google SketchUp, (It requires Windows 7 or newer. I am still running XP.) so I cannot access the plans provided. Could you please share yours? I also need the bed to accommodate XL twin mattresses (upper and lower beds). I could make those adjustments to your plans if need be.

Judith (not verified)

Wed, 05/09/2012 - 01:39

Hi Uli, I just love your bed, I'm new to building your own furniture but since I saw your bed I wanted to build it so I'm doing it. So far I have made the laterals and the back panels and now I'm putting it all together. I have some questions and maybe you can help me... you used bed brackets for the back panel, how did you put these so that they won't be seen? did you put them in the top and bottom of the panel?

Thank you very much

Judith

kad050209 (not verified)

Thu, 06/28/2012 - 10:14

Hey! I love the way you used the farmhouse bed for this daybed. It's perfect for what I'm looking for. I wanted to make my daughter the farmhouse bed but, we always wanted a daybed at the same time. This is perfect. Do you have any plans you can share with me so I can start making this? Thanks! [email protected] is my email if needed

SerinaDee (not verified)

Tue, 07/17/2012 - 10:26

I absolutely LOVE this bed and it is exactly what I want. I know many people have asked for the sketches, sooooo if anyone has received them, could they please forward them on to me??? (of Uli, if you see this and you have them) I would greatly appreciate it. You should definitely post this as a plan post because I'm sure many others would love it!

my email is [email protected]

THanks so much in advance!!! :) :) :)

Jason Lebo (not verified)

Thu, 07/19/2012 - 12:58

Hi Uli,

Outstanding work. I am going t make this for my 2 year old son. Quick Question.

I am confused about how to attach the posts to the panels for the head board. I assume you drill in from the far left and right of the posts? Do you use wood putty to hide the holes later? Could you use pocket holes? Or would that not be as structurally sound. Any advise would be appreciated.

From the instructions:

Now attatch the 4x4 posts to the panels. Make sure you pre drill half way through the post and use the 4 1/2" screws. Line the top edges of the panel and the post, keeping everything square as shown. Screw into the panel where it is sandwich 3 boards thick. Put at least 6 screws in each post.

Renee Glaze (not verified)

Fri, 10/12/2012 - 20:37

Can you send me a copy of the plans for the daybed. Does it have a regular mattress or just covered foam. Thank you

Val Manchuk

Sun, 04/07/2013 - 10:27

This is a great idea for a spare bed in our home office. Under bed drawers would be a good place for oir storage, too.

josie.a.richard

Sun, 09/28/2014 - 06:43

I LOVE this. Could i please get a copy of your sketch/plan? I am very new to this, and I don't think I could recreate one myself just yet!

Thanks

J

Outdoor furniture and coffee table

Submitted by jnovotny on Wed, 07/24/2013 - 10:48

Thanks to Anna's plans online I was able to create these nice pieces for my house.

Estimated Cost
500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Colonial maple and dark walnut stain for the cofee table. Traditional cherry for the outdoor furniture.
Recommended Skill Level
Intermediate

Garden/Storage Shed

Submitted by Smokeydog on Mon, 08/03/2015 - 06:48

Building a storage shed was quite a jump for me but because of the confidence and experience I gained from Ana's  site I decided to give it a shot.  I acquired the plans online. It has 8 foot high walls and 3 feet of "attic space".  The shed is 8'x12'.  I used cement board lap siding.  It took about seven weeks to finish working a few hours here and there.  I really like it.  Even has a little window flower box.

Estimated Cost
2100.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Benjamin Moore Paint
Recommended Skill Level
Intermediate

Comments

Fancy X Desk, Or my Chunky Medieval Desk

Submitted by Labumy on Sun, 03/04/2018 - 14:27

We estimate that the cost of this project was right around $50, but we had a lot of tools and materials already.  This was a fun project and a great piece for the cost. I would suggest staining as much as you can before assembling those legs!  Staining and applying poly was a pain in the butt!  We used a dark mahogany Minwax stain and 2 coats of Minwax poly. It took us a while to do it because we have a 11 month old that keeps us on our toes. 

Estimated Cost
$50
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Mahogany and Minwax quick dry poly
Recommended Skill Level
Beginner

Comments

Rustic X Kitchen Island

Submitted by Anonymous (not verified) on Thu, 04/21/2022 - 12:06

Used Ana's plans with a little modification.
I built 2 different sizes and donated to our church for their fellowship hall.

Comments