Community Brag Posts
DIY Wooden Bed
We needed a solid queen-size bed for our rental cottage, and Ana White had the perfect plans! Easy to follow, fun to make and such a beautiful big solid bed! We are so proud of ourselves. I can't believe we made this! I am really looking forward to my next project. Thank you Ana!
Sawhorse Table - Sewing Table
Found the plans for the sawhorse table on Ana and knew it would be perfect as my new sewing table. Such a lovely piece that will be very universal throughout the house!
Became a weekend project only because of the stain and painting that had to be done.
Minwax Polyshades Espresso Stain on Table Top
Beer Wall for Wedding
My cousin recently got married and wanted a beer wall at her wedding. I quickly searched Ana's site for the perfect plan and chose the Tall Panel Headboard for my starting point. With a few modifications it became a beer wall in no time at all. I love how Ana's plans can be easily modified to make a totally different project.
No fancy wood was used here. Just regular wood from the big box store. A jockey box was attached to the back side of the wall. It worked awesome!
Since I discovered this site in January, I've made close to 30 items from her plans. I'm ridiculously addicted and not just with Ana's site but also with her blog friends. For Valentine's Day I asked for a Air Strike gun and got it. It was better than jewelry and chocolates! I'm well on my way to collecting my own tools and learning how to save money by making it myself. Oh, and I can't even begin to tell you how impressed everyone is with my finished products.
Perfect for our crafting studio!
We made this a bit bigger for our crafting studio, Creative Grain Studio! 8x4!! Rustic and we are building a fourth today!!
Comments
Lift Top Toybox Coffee Table
Made a few adjustments to the measurements and top… pretty happy with the way it turned out!
Playhouse Loft Bed
This is my first build from this site! I used 6" boards to give the siding a plank look rather than using plywood. To make the height work, I used 8" boards for both the top and bottom planks. I also made the door a little taller. Other than that, I followed this plan step-by-step. It was very easy to follow and I really enjoyed making this bed. My daughter (and my sons) really enjoy it!
Reclaimed Wood Headboard (Pottery Barn Mason Headboard)
This was a lot of fun to do. Super easy and really transformed my bedroom. I love it.
Farmhouse Table
Plans were modified to change length of table to 8' and so that benches tuck under for winter storage. 5/4 cedar was used for table and bench tops-5/4 cedar was only available locally in 4" and 6" widths so we modified top slightly and made benches to match
Farmhouse bedside table
Farm House bedside table made of cypress. Bottom shelf inset.
Comments
Our Fancy X Farmhouse Table
We had been looking for a dining table for our new house that is being built. The dining area is a little small and we needed to find a 60 inch table. However, we were unable to find one that we liked at that size. I found plans for this table through pinterest and thought it would be a lot of fun to try. Plus, we knew that if worked out, then we would be saving a ton of money. The plans call for a much longer table, so my husband and dad reworked the plans to make it fit our space. To go with it we bought 4 Lyle Side Chairs from Crate and Barrel. We love how it turned out and we can't wait to see it in our new house in a couple months!!
Outdoor Sectional Set
Not as easy as everyone else said online. I had never used a kreg jig and it takes a bit more practice than I had patience for. one thing to note is the instructions screw lengths are for if you are NOT using a kreg. If you use a kreg, use the screw lengths they suggest. I used a deck stain and purchased the cushions on sale at Ikea ($22.50 per cushion)
Alden's two tone X book case
I built this book case for one of my Kids that wanted a new book case.
Queen Storage Bed
I took a couple of ideas and made this queen size storage bed.
Carol Hicks
Rustic Planked Wood King Headboard
This was a very nice and easy project. I probably could have finished in one day if it had not been 105 degrees outside! I recommend these plans to anybody who knows how to use a saw. I also used all screws instead of nails. Wood- Grade II Pine, purchased from Lowe's FInish- One coat Minwax Dark Walnut oil based stain One Coat Minwax Polyshades Mission Oak After the Polyshades dried, I went over the whole piece with steel wool to smooth it out.
One coat Minwax dark walnut stain
One Coat Minwax Polyshades Mission Oak
Farmstyle Queen Bed
Love the way this came out. My husband and I made it for my son and daughter-in-law to be for their upcoming wedding. The only issue we encountered was the box for the mattress was not large enough for the boxspring. But the kids decided they wanted the platform on the floor so we flipped it over and set up that way. I will be getting a nice bedskirt to hide that siderail. The kids really love it.
This took probably 20 hours all in. I figure a weekend would have done it if we had the time. Head and footboards were built in one day, sanding, finish work took longer as I worked on it after work during the week, and to allow for paint drying time. We ordered a pretty brass plaque to dedicate the bed, and fixed it to the lower back of the headboard. An heirloom in the making!!!
White and dark walnut
Fun to build, looks beautiful in our dark dining room. Used 5 tabletop pieces instead of 4
Benjamin Moore snow paint - 2 coats
Applied with small rollers
Minwax Dark Walnut stain- 2 coats. Polyurethane - 3 coats.
Applied with foam brushes
Farmhouse Nightstand
This was my first furniture piece that I have made. I made two night stands, one for each side of the bed in our master bedroom. I chose to modify the plan so I could have ball bearing drawer slides.
Entryway Divider
Happy to share this completed project based on Ana White entry shelf with hooks plan. I have a place to land when I come in the door!
6 cubby bookshelf
Quick and easy to build, the bit that took the longest was the stain, I used a maple satain and varnish.
Comments
Ana White Admin
Mon, 03/08/2021 - 10:46
First Build!?
Amazing job, thank you for sharing!