Community Brag Posts

Porch sectional all done. Just need the fire pit.

Our daughter's room has built-ins on either side of the window. I always wanted a window seat to sandwich in between, but couldn't find one with the right dimensions.....THANK YOU ANA WHITE! I used her Entryway Bench plan and just changed the length and depth to fit the window. I didn't add the side and back supports on top, but I bullnosed all the edges to make it look more finished.
I built this in one afternoon and even used cedar fence planks (left over from my husband's fence project) for the backing....love the extra charm of those planks!
We also had some molding left over, so I worked that in to the bottom for a little extra detail.
Haven't painted it yet....just enjoying it's usability until I decide on a color. It's super durable. My three year old sits on it (to read), stands on it (to spy on the neighbor's cats) and tosses those baskets in and out all day long.

I have come across several tables and chairs for doll furniture and decided I wanted to make something a little different.

I made a basic table and used 64 1 1/8 inch squares.
32/32 painted red/black and the other sides painted pink.

table is pretty popular around town so I decided to test Ebay and my website www.funwithdolls.com and I actually started selling a few.

Wayne

First attempt. Used Vaseline to distress corrners and shelves. 

Golf Locker. We love it!

This is my very first Ana White build! I needed a table to go into my craft room and stumbled upon Ana White. What an AMAZING site! After browsing and finding many projects i would like to give a whirl i finally decided on this modern craft table. My husband and I have worked together on many different projects and decided we would try this one. The plans were very easy to follow although we did make a few mistakes along the way. I painted it white and finished with several coats of poly. All in all we love it and have a list of other builds to do next.

Make sure to check us out at SouthernChicLove.Blogspot.com!

Modified Subway tile bookcase. 7' tall by 4' wide.

My wife recently started Grad School and needed a better space to study other than the dining room table. She found the plans that she liked on Shanty2Chic and bought the addtional tools needed for the job...she was serious about this project. I made the desk over 3 weekends, a few hours each day.  I only diverted from the plans by adding a 1 1/2" spade bit hole in the back to run the power cords through and tacking a surdge protector in between the top beams to help organize and hide the cords.

Switched 1x10 for 1x4

So after my husband and I conquered the headboard, we decided that we were geniuses at furniture making and we would just build the two side tables. Well, the two side tables are much more difficult than the headboard. The side tables are definitely do-able but make sure that you leave plenty of time for them. We built most of them on a Sunday and then finished them up in the evenings the rest of teh week. We do not have a Kreg Jig and were able to build them without it; however, if you have a Kreg Jig it would make thing 1,000 times easier. We did end up buying a miter saw because we were building the Old style Workmen's Bench bar at the same time (crazy, I tell you). It is CRITICAL to make sure that your inside drawer measurements work. If you are off just by a little, your drawer pulls are not going to fit. We ended up buying bottom mount drawer pulls. The drawers are a little less stable and can hold less weight (up to 35 pounds) but it worked for us. I think the real key to finishing this project are choosing the right drawer pulls. I really believe that spending a little bit more on the drawer pulls makes the piece look more expensive. We spent about 6.50 a drawer pull but they look really nice in person. TIPS **Stain drawer faces off, then attach hardware, then attach to drawer base **If you are going to use wood filler (I wouldn't), make sure that you use the least bit possible - the stain does not take to it the same

Just a little something to go in the dining room. I like the look of it. If I find another need for one I would definitely make this again accept use a different stain and paint the base white and use a semi-gloss or gloss protective finish.

I made two of these tables and they were pretty fun, but were a little more work than I thought they would be.  All of the wood is kiln dried douglas fir, as the first table top I made warped as it was green wood and not the look I was going for.  I shortened the length to 72" so I had to adjust the angles for the center pieces.  I decided to build the tables, stain it, them took them apart and glued important joints, prior to staining the tables a second coat to avoid the glue standing out.  I also used 4x4's instead of sandwiched 2x4's as I thought it looked nicer that way.  I finished with 9 coats of polyurethane on the top and than a coat of wax using 0000 steel wool to get all the little imperfections out.  

Garden Enclosure

TK

I built this island using Ana's base cabinet plans. I simply added a face frame to all the sides because they are all visible. My wife drew up the plan that includes open storage at one end and an overhang at the other to provide room for a stool. We bought the butcher block top online. It comes unfinished, so we had to sand it down smooth and treat it with mineral oil.

I built this PB Teen-inspired #1 shelf for my oldest son's bedroom. He has an all-star theme going on in there, so I knew this would be perfect for him. I modified the plans a bit and used standard 1" boards, rather than plywood. I am planning to hang it on his wall and I wanted to be able to have a sturdier shelf to do so.

This is what got me started in woodworking.  I started by repurposing different things. This is a piano that I repurposed into a bar.  I have repurposed many items. Then I got the urge to build new items.  I can't stop!!!  I am totally addicted!  I have built the sandboxes with the lids that fold into seats, (I adapted the plans to make a 5' by 5'), toys boxes,  childs tables and chairs, lego tables, and the list goes on.  I cannot stay out of my garage.  But I am loving it.

I made this pantry workstation by modifying the six laundry basket plans. Added 2x4 stretchers between the front and back frames, top and bottom. Made cleats from 1x3 for a less bulky look. And added 1/2 inch AC plywood shelves. Sand and stain later.