Community Brag Posts

As my daughter got older she refused to sleep in her crib, so I decided I wanted matching beds for her and my son. We live in a small 2 bedroom house so they have to share. So while looking up ideas for nice beds at a cheap cost I followed links until I reached ana-white.com and I was amazed. I sat on my computer for hours yelling at my husband to "COME LOOK AT THIS" (which I still do today). So I picked a plan and started on in. With some help cutting from my dad I had the first bed done in a couple days. Sadly I have not finished the second due to a random mind and trying to find a way to make my boy and girl room a little more grown up and uni-sex friendly.

I adored this desk, but wanted a stainless steel top to match the vibe in the rest of the room. Thanks to another Anna white post about killer b designs (i think!) building her own dream kitchen, I realized I could get a local welder to fabricate a top, just like she got them to fabricate the top of her island. They built a sleeve that drops right on top of the wood top, and creating about a 3/4" overhang all the way around the desk; it cost about $275. Otherwise, I followed Ana's directions and painted it an off-white color that's the same as the trim in the room. Love it! Thanks Ana!

Rustic X Coffee Table Brag! Thank you so much for the plans Ana! Keep building everyone :)

We built this piece exactly to fit our space. We needed more storage and wanted something that would hold our TV so it didn't have to be mounted any more. We used Behr paint to finish it. It is made out of pine and is very sturdy. It took us about a week to build but could have been done In a few days if we could have dedicated 100% of our time to it. 

Building Bunk beds and custom beds is what i do. I router the corners so that they are rounded, plane the face's of the boards,and sand to perfection. then i glue and screw it all together. you can check out the site at http://www.dreamworksbunkbeds.com

A co worker reeeeally wanted this and asked me to build it. It is only my second build.

I made this house using oak plywood for the floors a using a straight edge and paper knife to score it to look like planks and made the lengths vary by using a chisel. The roof is made from 1/4" underlayment painted with red oil base paint and cut to make it look like shingles. It is on heavy duty 4" casters. I have made two identical houses for the same lady who purchased them for an aging aunt. This is the first of the two and was lost in a house fire. The second one was to replace this one. If I make another house I will be installing working lights in it. This is a very large house and fun to build

I modified from the Clara table plans.

I loved the look of the Rustic X Bench but wanted to modify to be an entry table. I took the exact plans, but made it longer and taller. The X bracing didn't match up exactly, but I like it with the separation. The stain is a Minwax Espresso finish. I added adjustable glides to the bottom so I could adjust if needed. It was an excellent first project and it fits in our home PERFECT! Thanks Ana for the inspiration to create, build and be a mommy at the same time :)

Since our dining room is small I modifed this table to 66" long.  It is 50" between legs.  Also, I do not have a table saw, so I could not get the 10 degree angle on the legs.  I actually think that having them at 90 worked out better since this table was scaled down.  We love it and think it is really great in the room.

Mantle moulding plan modified with a center 2 X 4 and used sanded plywood for the back. Finished with a few different mouldings but turned out great. Nice plan. With pre-stain, stain and poly, project extended to about a week.

I love this stool. I used the plan as is, except for creating the angles similar to those shown on the stool photos in the plan. If you follow the plans directly, your stool will be standing completely straight vs the slight angle shown in the photos. If you are not comfortable with cutting angles, I would definitely stick with the plan. I had to play around with mine until I finally got everything right.

The time allotted is more due to waiting for paint to dry versus actual build time. The stool goes together quickly, but sanding & drying time do eat up the hours.

Thank you Ana for the great plans! I have more of these planned for the future, so cute & they'll make great gifts!

Followed Ana's plan w/ minor measurement changes to fit my needs but the Rustic X Console came together pretty good. First we were going with a blue stain but once we got the stain oh the wood it was just to much so we opted for a lighter paint and finished off with a light lacquer.

Build this one out of pine and used DIY Pete's handling method of the wood to make it look older ( http://www.diypete.com/how-to-build-a-farmhouse-table/ ) with vinegar and steel wool. 
The beams are halflap joined to the legs and no screws where used to attach the beams to the legs. It is rock sturdy. The leg frames are glued and screwed together with pocket holes. The planks in the tabletop are only put together with pocket hole screws and fastened to the beams from underneath with long screws. Finished with Chinese oil. This outdoor table was a gift to a good friend.

This was my first time using my own measurements for an Ana White build. I was really nervous but having completed a few other projects by following plans exactly, I felt confident I had gained the skill to branch out of my comfort zone. I had been looking at coffee bars for my kitchen, but at $300 and up, cheaply made and in the wrong dimensions,. I just knew I could build something with better quality for a portion of the price. This project took me half a day to build the carcass and then another afternoon to figure out the door hardware and stain. I used all 1 x boards and the final bar is 12" wide so I used 1 x 12 boards for everything except the trim.  All in all you could complete it in a few hours, it was really simple. I made the door hardware by popping open two pulleys and attaching them with metal somethings (not sure what they are) that I found at Lowes. I then ran a flat bar across the front using spacers like Ana did in hers. I painted the hardware with Rustoleum Oil Rubbed Bronze spray paint and stained the top of the bar with Minewax Dark Walnut, the bottom is Minewax Ebony. I still need to poly. One thing I changed up was the top. Instead of using a piece of plywood, pine, or combining pieces together, I used a stair tread! It was a little thicker than a typical 1 x, and also had a rounded edge which I think gives the piece a finished look! This is a piece of furniture I will truly use every single day and I couldn't be happier with how it turned out! The grand total? $60 for the wood and $20 for the hardware. $80 all in all (I had the stain leftover from another project). There's no way I could have bought a piece this nice for that price! 

I saw Ana's plans for a toolbox and thought that's great! Then I saw another members adaption for a cleaning caddy and I knew I had to build both!

I build on my lanai (porch) in Hawaii, so my work area is fairly small. It was easy to build these at the same time, and I made plenty use of my Kreg jig!

I really fell in love with this crown ledge and had to do it. Of course I did it to fit the length I needed and I also added a decorative piece of trim at the bottom to give it a more finished look.