Community Brag Posts

Utilizing Ana’s plans I was able to build this great bed with a few “ extras”. Box joint drawers..rail/stile drawer frames.. peg joinery to name a few!  So much fun following these plans and achieving results that made one young man very happy!  Thanks Ana!!

This was my second project from the site. I wanted somewhere to read my book on the back deck. This chair is perfect. When I get tired of reading I can lay it down and take a nap. It is very sturdy and easy to put together. I do recommend using pocket holes to assemble it. I found it much easier.

Just in time for Fall Mums, I wanted a set of sturdy planters that I knew would hold up in the winter. I wanted to try something that felt more 'simple' to me than the pattern I was inspired by.

I used some 2" wide pine so they ended up quite heavy, but I know they'll hold the test of time.

It was quite an easy project, and I encourage anyone to make their own. It took me only a Saturday once I got going. Painted them the next day... then done!

Enjoy the details here --> http://projectjumanji.blogspot.ca/2013/08/homemade-decorative-planter-b…

Followed the Rustic X console plan except did not go for the rustic stain look. I am happy with how it turned out, even though this is my first wood furniture type project. I am not much of a handyman. 

I built this American girl doll house for my daughter. I wanted to give her something to keep her youth alive! 

Probably one of the most popular plans, and possibly my favorite...maybe I am biased because it was my first Ana build. Being my first Ana build, and my first carpentry project in several years it took a little longer than I hoped. Mostly nerves I think, and the fact that I am a perfectionist...what others may call picky =0) I really enjoyed building this piece, frustration at times included. It was great to be back in the shop after so many years of apartment living and no space or tools to speak of. A word of caution - once all my hard work was done it almost didn't make it out of the basement, not enough clearance. I was ready to shorten the legs but thankfully after some careful pivoting and ingenuity (my father in laws, not mine) it found its home in our bedroom...and I couldn't be happier! Having been 1 of 4 girls in a high school house carpentry program full of boys it is so inspiring to see so many women building, creating, and loving every minute! Thank you Ana for all you do!

I designed and built this sectional for some friends, and then wrote a how-to about the process! There are free plans for it, and a time-lapse video of it being built at http://www.iliketomakestuff.com/outdoor-sectional/

My husband has some cherished knick knacks and I am hoping to give our little home a little charm. 

The most difficult part of this project was lining up the dowel holes for the shelf. 

2-1x6's cut to the length of the window 

2-1x6's cut to 6-1/4" for the sides

1-1x6 cut to 4-3/4" for the center support

Fostner  (sp?) Bit at 1" for the dowels, I centered them and put them 2" down on each side and the on each side of the center support

Then I sanded, sanded and then sanded some more.. .

I used the 1/2" fostner  bit and spaced the holes 3 3/4" apart on center for the rail and the top. 

I cut a 1/2" dowel into 2" pcs. 

The rail is a 2x2 that I trimmed down on the table saw, it finished out at 7/8"x1-1/16"

Lots of glue, more sanding and it was complete

Added 3 hillman heavy duty hangers to it and hung it over the living room window. 

pine jelly cabinet

First time really building anything out of wood. Getting a kreg jig was probably the best decision I made on this project. I made the legs slightly taller (7") for a bit of underbed storage and used a 2x4 brace instead of 2x6, so I could sit the slats down a bit lower but still keep a gap above the legs. The mattress sits 3" below the edge of the bed. I put a few legs under the center support, but they probably weren't necessary for the queen size bed. I spent about $150 for the lumber ($50 just for the bigger slats for my memory foam mattress), and about $50 for the kreg jig jr. and screws. I did not use any glue so I can take it apart later, and so far it seems pretty sturdy with no creaks. Thanks so much for the plan Ana!!! On to a headboard and bedside tables...

Built these two adirondack chairs from pallet wood that I had at home. Made the perfect seating area for my fire pit. Can't wait to enjoy the fall evenings in my $0 chairs!

What I really liked about this plan is its versatility. Relatively easy with pocket hole joinery and inexpensive materials, I used paint to match existing furniture and solid wood tops and drawer fronts to add just a touch of elegance.

We had to change to a slightly different size wood as the sizing of the original plan would have been very expensive in the UK. 

We also had to adjust to a different mattress size (90x190cm). 

We also had to work around a radiator. We left no gaps on the platform. 

Huge hit and very pleased with the result. 

My fiance and I built 2 of these chairs. He took one to his house and one is at my house...for now. Picked up 2 cushions at Walmart on Clearance. I sit in it quite often. Great plans!

This is my favorite build so far! My two younger daughters share a room with an inevitable shortage of floor space. What they do have is a fairly large closet for 1 and 3 year old. I removed the crumby sliding doors and filled the bottom third of the space with the dresser, leaving plenty of room for kids clothes to hang above. I combined two separate plans and adjusted the measurements to fit the space. What I ended up with is a monstrous 6 drawer dresser that I would never have room for in the bedroom otherwise. The drawers are enormous (a must for a house with three little girls. They have more clothes than their mother and father combined).

I took the frame concept from the Shanty2Chic rustic rolling dresser and the drawer concept from the Madison dresser from Old Paint Design. (Thanks Ladies!) It took me some significant math adjustments (I'm not a math guy) in order to alter the drawers for wood slides, alter the frame to fit that, and alter both to fit the 70 3/4" x 24" space.

The finish took the most time with a bizarre mixing of Rustoleum Dark Walnut and Rustoleum Classic Cherry. I love the color now. Clearly I have not fixed the wall paint yet :)

The wood is big box pine as I am still working up the confidence to work with more expensive wood. The top is 1x12's and 1x2's. The sides (hidden) are 3/4" plywood. The hardware is from Lowes.

My daughters were nice enough to decorate the dresser during the build with crayon requiring a 40 grit sanding Grrrr.

Loved building this table. This was my first time building anything! I have a lot to learn but I think it turned out great!

We took the original plans and made them work for our 5’6” x 11’ closet. We added a ft to the top because we have tall ceilings. We made 5 towers to create a u shape with shelving on the top. I also left one small bar long to hang dresses and the rest we double hung. We adjusted cubbies and drawers based on where we needed them. We were able to save by using old drawer slides from a falling apart ikea dresser. (We cut them down with a grinder).  We had an overflowing closet mess and now we have a beautiful closet. I wish the directions had a little bit more detail like average clothes hanging heights and bar distance from the wall. There was also no link to the suggested drawers or cubbies but we found them with a simple search.