Community Brag Posts

I saw this and fell in love! I've made three so far!

Thanks for the shed plans, I've been looking all over for something like this. I used 3/8" ply wood for the back wall to save money but spent what was saved and more on the shingles and stain/seal. I made the shed exactly 6' wide and 4' deep to fit the 6 2'x2's patio slabs.
The entire project took about 2 weeks to complete and cost about $700. We pay more in Canada but at least I finally got the shed I wanted.

We always wanted a real barn beam in the house, we bought an old ash beam that we used to create a modern mantel.   After some research, I decided to save some money and mount it on a 2 x 4.  I've provided some instructions on my blog.

http://www.woodworkingfourdummies.com/blog/barn-beam-mantel-diy

Cheers,

Ian

This was built as a nightstand/charging cabinet.  I made it a little deeper for more stability. I also replace the 4-5 drilled holes with a corded electrical/usb outlet that allows you to both plug electri cords and usb cords for electronics (about $10 online). I added a center 1 X 2 and magnet closers on the doors. I used unfinished wainscot for the center of the doors.

The bed on the left is the one that I made. I used as much reclaimed wood as possible for this project. I had a bookcase that wasn't stable that had a lot of 1 x 4s so I took it apart and used them. In the second picture, I made the elephant wall art with some 1 x 2s and stapled the fabric to it. It hangs on the opposite wall. It was a fun project. (did not make the bench) I have a lot of interruptions when I build, so I am not sure about the length of time.

My first Ana white project!
It was easy and I really tried to take my time to make it look nice. Great new BIG table for my sewing room! LOVE IT!!

Stained the top 2x12's black and the legs are oops paint that are a teal color.

I enjoyed making this project! My wife loves the table and benches.

A few months back a friend of my Sister asked if I would build a bed for her 10 year old daughter. I was excited to do it! So I finished up the projects I had already started and then went to work. I had never built bookshelves before. I wanted it clean and "hole-less" on the outside, so we found a Kreg Jig and I started learning. SUPER easy!! I believe it has been painted white. I can't wait to go see it!!
I followed Ana's plans except I used 2*2s for slats and used 16" wide boards for one of the bookshelves and the desk top. I want them to be able to use this for years to come and not out-grow it too quickly.

Thank you for the plans for this fence! So many sites tell you what you need to do to plan for a fence, but don't give you any dimensions, materials, etc.

I didn't do it exactly like your instructions, but close enough to give you all the credit!! I am a 45 year old woman, with only a little do-it-yourself experience. I went to the hardware store, and asked "what are these PH screws?" and felt a little stupid. But my friend Tanya and I built this fence this weekend, with a post level, stakes and string, a chop saw, two 18v drills,a sledgehammer, a string level and a sharpie! We are so proud of ourselves.

I still need to trim off the tops of the posts, and do a few little tweaks. Also, we did not dig post holes. We used oz-posts, and pounded them in with a sledgehammer, attached the wooden posts into the oz-posts with heavy-duty construction adhesive and 8 screws, and straightened them with a huge wood clamp. And next weekend, I'll be putting in raised flower beds along the bottom to cover the lower space. :-))

We have a very big dining room in which we tought none of the store-bought tables would look good in. We needed a square table!

We got inpired by this beautiful post on Ana White (http://ana-white.com/2011/05/farmhouse-tablesquared) and soon after that starting to go look for what sizes of wood we can get. We live in an apartment, with no access to super big machinery so we needed to work with what wood stores offered us. We adapted the plan to our desire. Total cost was lower that 300 Euros, including screws, glue and stain. We are THRILLED!! :)

Turned leg coffee table from pine.  I also built matching end tables (shown in another post).  :)

Built this bench over a couple of nights. It was really easy. The most difficult part was deciding on the color and finish. Overall it came out great and looks good by our front door. The finish is Old Fashion Milk Paint in Salem Red. I painted two coats and then sanded the sides and corners. I'm contemplating adding an antiquing glaze to give it an older look.

I utilized a mix of the platform sectional and the simple modern sectional to create this piece. I added the design on the back rather than the simple 1x4. I also made the entire piece out of 2x4s and 2x2s.

I modified the width of the shelves and as you can see from the variable height of my garage one side was made higher.  

I used some scrap wook so I was able to cut expenses by about 25 dollars.  The total cost was 50 dollars not including the nails.  Although time is money.  It took me one day to draw up the modified design, get prices and get the wood and then another day to put it together.  With what I saved by doing it myself I could have made more working and buying a premade unit.  However with this said, it would not be my personal accomplishment and modified to my unique needs.  Besides, I had fun doing it.  

Thanks for your info.  It was very clear and simple.  Debbie

This was a fun project that ended up being a multi-use table! This was originally built as a small island for the kitchen but as the family grew it became a changing table! The top was purchased online at home depot, the base is made of douglas fir 2x4's and the corners accents are Simpson Strong-Tie ZMAX Galvanized 16-Gauge 2X Rigid Tie Connector available at HD for about $2 each. Thanks for looking! See more at my website analogwoodworks.com!

I made this table for a baby shower gift for my newest niece. I used the clara plan as a starting point and went from there. I ended up using (2) 2x12x36 for the top kreg jigged together and sanded them completely smooth. I used existing legs from an end table and added the aprons.

I also just shortened the cubbie length to make it short enough to fit on top of the table.