This project started because a corner bathroom vanity that fit my space requirements and budget did not exist. A plan specific to what I exactly needed also did not exist. After combing through what plans I found online, the Wall Kitchen Corner Cabinet best matched what I wanted. I modified it with the Momplex Sink Base Kitchen Cabinet in order to turn it into a sink base.
But, there was a problem. I hadn't actually built anything before. In order to get at least one project under my belt, I built the Vintage Step Stool. It turned out great, so I figured I was ready to go! Strangely enough, after spending about $100 and several weekends picking away at this project, it was done! It looked great, even. Then, I moved the vanity into the bathroom and realized that, while it may have looked great, it wasn't very square. Lesson learned was that this is a two person project. It is too difficult to keep things square and screw at the same time when there is only one person.
At this point, everyone was tired of having to use the kitchen sink to brush their teeth and wash their hands, so we needed to get this project done. $100 later, we had more material. Since I had figured out what needed to be done with the first vanity, let's call it our prototype, the second vanity went together REALLY quickly.
Within a few hours, it was pieced together. Since it was going to be painted, we used Bondo to cover up our imperfections. Yes, of course there were imperfections. While much better than the prototype, it still was only my third woodworking project. Sanding, caulking, and priming took another hour or so. A few coats of the finish paint went on, followed by a couple more coats of a clear sealer, and it was done.
We moved it into place, screwed it to the wall, put the soapstone countertop on along with the sink and faucet, and it truly was complete. Sink is Kohler, faucet came from our local Habitat for Humanity store and I'm not sure what brand it is, and the soapstone came from soapstones.com. If we had oiled the soapstone with mineral oil, it would be a very dark gray.
Comments
Guest (not verified)
Sun, 01/15/2012 - 20:10
I love this table but I
I love this table but I wonder how do you use it to sew with? or do you sew on this table?
beingbrook
Sun, 01/15/2012 - 20:24
Sewing
I don't use this table to sew on. My craft room also has a sewing table that we built using the narrow farmhouse table plans. I use this to craft on and to cut fabric out.
Ana White
Sun, 01/15/2012 - 21:57
Brook, wow!!! This table is
Brook, wow!!! This table is simply amazing! Thank you for sharing such beautiful photos too!
Guest (not verified)
Mon, 01/16/2012 - 10:03
looks great
the whole room is beautifull. how many of the other pieces of furniture were built using Anna's plans?
Guest (not verified)
Mon, 01/16/2012 - 10:03
looks great
the whole room is beautifull. how many of the other pieces of furniture were built using Anna's plans?
In reply to looks great by Guest (not verified)
beingbrook
Mon, 01/16/2012 - 20:49
Almost all of it is Ana Plans!
Everything but the dresser/hutch and barstools we built using Ana-White plans!
mebohn
Mon, 01/16/2012 - 12:06
I love this color.
This table is fabulous and I'm really in love with the color! Thank you for sharing. So many new ideas for my room now!
mebohn
Mon, 01/16/2012 - 12:06
I love this color.
This table is fabulous and I'm really in love with the color! Thank you for sharing. So many new ideas for my room now!
Lis West
Mon, 01/16/2012 - 17:32
Modern Craft Table
You won't believe this...but today I was shopping for the wood to make the Modular Craft Table, but I did not buy the wood because I was trying to tweek the plans to change the "cubbies" and size. So, I came back to this sight and here is this craft table that would be much better. I want to make it table height rather than counter height so I can sit down and sew at it. I also want to be able to drop the back 12 inches of the table if I do not need it and so it will fit better in my room, wheels on the bottom to pull it out easily so I can extend the 12 inch table when needed. I love what you have done!
Cindy from Indiana (not verified)
Tue, 01/17/2012 - 11:36
This looks great!
You did a fantastic job on this project! Love the way it looks and the color!
Great job!
Ricci (not verified)
Sat, 01/21/2012 - 07:00
Please Help!
I love this table, but I can't seem to find the directions to make it. Can you point me in the right direction to find it?
Joe (not verified)
Wed, 01/25/2012 - 17:24
Not for sewing
Is there a reason you can't sew on this (from what I gathered from a previous comment)? I want to build something for my wife's craft room and love this, but she will need to sew as well. Help?
Brook @ BeingBrook (not verified)
Wed, 01/25/2012 - 17:32
Sewing
Joe,
It would be hard to sew at this table because the table is counter height. You wouldn't be able to reach the foot peddle to run your sewing machine. You could alter the plans to fit a spot that could hold the peddle foot. I sew on a different table in my craft room and use this for cutting fabric and general crafts.
Brook
Guest (not verified)
Wed, 01/25/2012 - 19:26
at one time I had my sewing
at one time I had my sewing machine in a spot that was counter height. I used a wood box to put the foot peddle on. One of anna's steep stool plans or the bathroom platform for kids plan might be good to build with this. It was also nice when I was sewing small pieces that needed lots of ironing to stand and sew at the counter.
Guest (not verified)
Wed, 02/01/2012 - 14:25
I have a modern sewing
I have a modern sewing machine (within last 5 years) and I routinely sew at counter height with no problem. I prefer it because it really helps my back. I cannot wait to make this!
Guest (not verified)
Fri, 02/24/2012 - 22:36
Joe, I think it would work to
Joe,
I think it would work to mount the foot pedal on the inside of the shelf area. She would use her lower outer thigh to depress the pedal while seated.
Angela Preimesberger (not verified)
Tue, 05/08/2012 - 07:47
Very nice!
I love this table! I'm with Brook and don't sew on mine. Height issue is easily worked around - main issue is usually back support. Sewing at a huge workstation tends to leave you feeling unsupported and sitting on a stool (I have a nice wide comfy one from Target) leaves your back unsupported so you usually slouch (bad! bad!). I sew at my smaller desk in a good supporting chair and use my table for everything else. I use this table for a true work area including cutting. I have an Accuquilt Studio and that sucker is HUGE and heavy!
Michele Crane (not verified)
Mon, 11/12/2012 - 11:22
Love This Functional Table
I just talked my fiance' into building this for me to use as a desk. I need a desk for my work from home position where I can store everything as well as have a large area to spread things out. I loved this the moment I saw it and talked him into building it for me. Can't wait to post the pictures when it is finished.
bbawol
Wed, 12/12/2012 - 16:47
Chair
I was wondering if you could tell me where you got the chair from? It looks like it pairs very well with this table and I would love to get one for my wife for her table I just finished.
Brook @ BeingBrook (not verified)
Wed, 12/12/2012 - 17:00
Ikea
The barstools are from Ikea! I think they are called Ingolf.
-Brook
nkliegel66
Thu, 02/28/2013 - 16:15
Galvanized Pails
My husband made this FABULOUS Craft Table for me last weekend, it turned out PERFECT! Thank you so much for posting this with such detailed directions....
What do you have in your galvanized pails? What do the labels say?
Thank you!