Community Brag Posts
Loft bed with stairs
I started planning this project this spring when we bought and moved into our new house. I knew with the room size a loft bed would make the most of the room. My daughter is scared of heights a little bit so I was worried about using a ladder. I stumbled on this site and these plans and knew this is exactly what I was going to build. Ever since we finished painting it and getting her room done she has been glued to it!
Comments
Night stand
We had a lot of scraps left over from a previous project so my husband decided to piece together a night stand for our daughter's room. We modified some end table and bar stool plans to fit what we were looking for accordingly. Because her furniture is natural color, we left the wood and just coated twice with polyurethane.
Comments
Simple staircase bench
A simple bench to try my first Kreg Pocket hole Jig. I designed the bench myself, but did not create plans. I used pine wood and 3 layers of varnish for protection. My wife wanted to natural finish so I preferred varnish over paint.
Surprinsingly easy project ! And my wife is very happy that the staircase if finally tidy. Happy wife, happy life ;-)
Little Helper Tower
This project is so great! At first I put one side of the hinges on backwards but it was easy to fix and now it actually folds flat. I left the stabilizer feet off because I only have about four inches beside my fridge to store the tower in but it it's still completely stable. My son was "dancing" on it yesterday and it held up perfectly! Thanks Ana, I'm so excited to use this for years!!
Christmas pie safe
I found the knob on clearance for 59 cents at Lowe’s and the hinges were under $3. The rest was just pretty plywood and some thin poplar instead of edge banding with a boiled linseed oil finish.
Comments
julia nightstand
Nice plan to do. Used an off white paint and antiqued it with stain pen.
Rustic X Coffee Table
This was my first build and I'm really happy with how it turned out!
Comments
Custom built kitchen
With our old kitchen crumbling to pieces, I decided to build a new kitchen. I followed several of Ana's cabinet plans to build the entire kitchen(more than I could list at the bottom). I was able to customize the cabinet sizes in order to maximize my kitchen space. I made the doors myself, so I didn't need to worry about standard sizing. It took me about a year from demolition to completion. I had to buy a few new tools, all the wood, appliances, the floor, and countertop, and still spent around $5,000. I learned so much from this project and we all love our new kitchen! Thank you Ana for all of your wonderful plans!
Farmhouse play table
Made per the plans but I made walnut tabletop for it
First project!
I still can't believe how great this turned out and looks just like Pottery Barn's! It was our first project but we are now tackling bookcases for our family room... I can't wait to post again!
Comments
Restoration Hardware Industrial Wagon
What new Mom wouldn't want this for a baby shower gift!!! Easy build
Comments
Farmhouse with end extensions
This farmhouse table I built is 40x84 and has 9" extensions on each end for a total of 102." I opted to go with 2x4 extensions instead of 2x2s for a durable look and feel!
4x4 Truss Bench
This was my first bench build and I’m happy with the way it turned out! I adjusted the plans to account for wood movement of the table top using mortise and tenon joinery and draw board pins on the bread board ends. Also edge glued the table top boards and used z-clips to attach the bench top.
Rustic X Console
I finally talked my husband into helping me whip this thing up. It didn't take very long to put it together, but it did take a long time for me to figure out a finish I would like. I used the steel wool/vinegar and black tea stain, but it ended up too dark, nearly black. So I sanded and sanded and applied a wood stain on top of it. It looks great!
Farmhouse Bench Birthday Surprise
We bought a new house this past summer and got a new table but without chairs. My wife wanted a bench for one side and I decided to surprise her and make one. This was my first woodworking project and thanks to Ana it came out great. I made some modifications to the plan:
4x4 for the legs
2x8 for the top
2x6 for the breadboards
I also made it about half as long to fit under the table.
My time frame was longer than it needed to be because I made some rookie mistakes I had to redo some things. The notches in the legs was probably the only really hard part and with some practice not bad at all.
My wife loves it and now wants me to build more! I guess I have a new hobby!
I finished it off with a single coat of Varathane Red Oak and a satin poly.
On to the next project....
Massive Craft Table with storage cubbies
I am a Block Printer and Screenprinter, as well as indulging in other projects. I needed a fairly large table that would allow me to print fabric yardage fairly easily, as well as be able to layout the fabric to cut. I decided to build this table that I had seen on a couple of different sites. There was not much instruction on either site, but it was fairly easy, and I was able to figure it out pretty easily.
I wrote a more detailed blog post on my blog with details as well as what I learned while building this table.
Modified desk into makeup vanity
I built this for my adult daughter’s Christmas present. I modified the plan to have three drawers instead of the cubby. I also tapered the bottom of the legs. I added a back piece to hold a mirror. I also added door knobs to the back for necklaces.
The top and the back board are both 4 boards glued and clamped together. I finished the edges of the top, drawer fronts, and the back board with an ogee router bit.
Console from Ana
We started this project on a Sunday and finished Tuesday. We did make the legs taller to fit under our tv, so we also needed to adjust the front and back 2x4 support to be a little taller.
other than that, we followed the plans. I stained the top with Rustoleyum Dark Walnut and the bottom is spray painted, painted and distressed using the Shanty 2 Chic ideas.
LOVE this table! It was exactly what I wanted! Now, to find 2 small lamps to sit on either side. :)
Comments
6 drawer dresser
Made this dresser for my newest Grand daughter. Turned out pretty nice. A few mistakes for sure!!! But I am proud and its functional. Worked on it off and on for a month.
Comments
Mon, 12/21/2020 - 11:23
Thank you for all the plans…
Thank you for all the plans. I started wood working a year ago and I am still learning.