Community Brag Posts

Console Table

Submitted by Anonymous (not verified) on Fri, 06/09/2023 - 11:44

Very fun! Thanks for providing the plans!

Comments

Farmhouse coffee table

Submitted by Anonymous (not verified) on Fri, 10/04/2019 - 10:56

For this coffee table I actually used the triple pedestal farmhouse table as an inspiration and just made it smaller and made 2 rather than 3 pedestals! I made the top the size I wanted it to be and then I made the pedistals really short to get the look I was after!

Built from Plan(s)
Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Used a grey stain and a dull lacquer.
Recommended Skill Level
Intermediate

Bar buffet

Submitted by Anonymous (not verified) on Sun, 10/06/2019 - 12:32

We needed a unique bar for our home, and loved the sliding bar doors on this one! It fits our house, and we get so many compliments!

Built from Plan(s)
Estimated Cost
400
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Sanded everything, applied Kona stain, finished with a poly top!
Recommended Skill Level
Starter Project

Comments

Bunk Bed

Submitted by hoffer5353 on Wed, 02/08/2012 - 14:04

I am very happy to have completed the up portion of the bunk bed. The full size down was done quite sometime ago and I became sidetracked on other projects.
This is a sturdy bed and a favorite in my home. One day I even found my husband napping (hiding) on the top bunk.
The part that I like the best is when we graduate from bunk beds we still have two beds to use.
I also completed the ladder and it works, but I cut it just alittle shorter than the plan called for. Lets just put another on my to do list.

Estimated Cost
100-200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
minwax, red oak stain. Minwax Poly
Recommended Skill Level
Beginner

Comments

hoffer5353

Sat, 02/11/2012 - 14:37

It was surprisingly more easy that I expected. It helped me stay motivated to finish both beds.

Deko Holzscheiben Spiegel

Submitted by badspiegel on Mon, 10/21/2019 - 02:10

Für den Bau dieses Spiegels benötigen Sie eine Unterlage aus MDF. Eine dünne MDF-Platte zum Beispiel wäre Optimal.

spiegel-mit-rahmen-aus-baumscheiben

Before you be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be Damit Sie wissen, wohin Sie den Rahmen aus Holzscheiben kleben sollen.

Nachdem die Holzscheiben verklebt sind, kleben Sie den Spiegel fest in die Mitte des Spiegels. The whole can same method also with a eckigen mirror and wood scheiben made. Schickt uns euer Exemplar und wir veröffentlichen die Bilder hier auf dieser Seite. Falls Sie auch so einen Spiegel haben möchten, aber keine Zeit, um sich ein Angebot zu machen. Wir produzieren Ihnen den Spiegel dann.

Lieben Gruß und viel Spaß bei der Ausübung des Projektes. Wir sind auf eure Bilder gespannt!

Estimated Cost
100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Master Bedroom Update with New Bed!

Submitted by Anonymous (not verified) on Sun, 07/30/2023 - 15:07

Master bedroom makeover ❤️ bed plans are from Ana White

 

Built from Plan(s)

Comments

DIY Wood Headboard

Submitted by Anonymous (not verified) on Thu, 08/24/2023 - 12:10

Thank You for this Headboard Plan. It was very easy. Other than painting it I completed it in less than 3 hours. A nail gun sure saves some time. Everyone loved it. They wanted me to put clear coat on it because it looked really good, but I ended up painting it to match my other bedroom furniture which is Black.

Scott Boyd

Family stocking stand

Submitted by kjoslyn78 on Tue, 12/24/2019 - 14:33

We have a vent-less gas wall heater, but had no mantel for hanging stockings. Thanks to the new plan, we have the perfect solution! We already had the 2X4s left over from the simple panel bed project, so we only purchased hooks and stains for this. 

We shortened the width to accommodate 4 stockings instead of 5 (we cut the 2 cross pieces 9 inches shorter). We also decided to add a large 2X6 cap to mimic a mantel, which really seems to tie it all together much better. We love this and have ideas now on how to make slight changes so it will more easily slide "over"/around the wall heater

(yes, we are not keeping it that close while stockings are hung, so as to not risk catching fire)

Built from Plan(s)
Estimated Cost
Under $20 (if you need to purchase wood/stain, we did this for under $10)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Rust-oleum: Kona
Recommended Skill Level
Starter Project

Barn Door Pet Kennel

Submitted by Ana White on Wed, 02/19/2020 - 14:19

Built by Holli Peterson

Built from Plan(s)

Comments

hodnett1984

Thu, 08/31/2023 - 21:23

I’m looking to make one similar to this but looking to make it a little bigger for two Great Danes. Do you still have the plans and or cut list for this project to help me out. I’d greatly appreciate it if so.

Popcorn Machine Stand and Storage on Wheels

Submitted by advanlente on Sat, 03/28/2020 - 10:55

My parent organization at the elementary school had just bought a brand new popcorn machine but had nowhere to store it. So, I offered to try my hand at building a stand with storage. I knew that we needed the stand to be mobile as the idea was to pop the popcorn in different classrooms for incentives, etc. I modified the kitchen prep cart to have a large cabinet underneath to store the popcorn, bags, etc. The pullout drawer was home to the measuring cups, directions, etc. I used my Cricut and cut out our school logo, placed on the popcorn machine and then polyurethaned it to the side. It turned out great!!! I could not be happier :)

Estimated Cost
$120
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Red paint and polyurethane

Comments

Faux Mantle

Submitted by Lady Goats on Wed, 04/02/2014 - 12:26

Built a fireplace using Mimi's Faux Mantle plans - I think it turned out great!

Built from Purebond plywood because I can't find straight boards in bigger sizes in my area (EVER!) and used fir 1x's for everything else.

Finished with three coats of Behr paint/primer in ultra white. I will not buy Behr again. Personal preference.

Estimated Cost
$90
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Behr Paint/Primer in one - ultra white
Recommended Skill Level
Intermediate

DIY RH Dining Table

Submitted by vlilly on Sun, 04/27/2014 - 13:22

I loved making this! I had to travel about 2 hours to get the DF 4x4s which was the only pain in making it. This was my third big project and it wasn't hard at all! It's super heavy so it was a litte tough to turn it over. It only took me about 3 days to make it once I had all the wood.

Estimated Cost
$175-$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Stained with Rustoleum American Walnut, then applied a coat of Rustoleum Poly in matte.
Recommended Skill Level
Intermediate

2x4 Sofa w/ Chaise and coffee table

Submitted by andrew_w on Wed, 06/03/2020 - 10:25

Just completed this to make the most of the little hot weather we get in the UK. Great plans to follow thank you. Built around a cushion set for a rattan corner sofa which was then filled with 3" firm upholstery foam

Estimated Cost
£200 including upholstery
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Ronseal Natural stain
Recommended Skill Level
Beginner
Back