Community Brag Posts
Twin over Full with Trundle, storage stairs
This project took a week to build. Working during my boys' nap time and late nights, I was able to complete everything in about 7 days. I used cedar, and sealed with Cabots Bleaching Oil. The cost of wood for the beds and stairs and drawers came to about $700. The extra cost came from the additional side rails on the top bunk and the stairs and drawers. Still comes in about $500 less than if bought commercially. The famiy loves the bed and as my kids are 2 and 3, I expect to get many years out of the bunk bed. Side note: I had to add quite a few brackets and angle joists to secure and minimize wobble due to the additional weight of the top bunk. (2 2x4s from the 4x4 to the side of the cleat and side rail of the bottom bunk, on the back side only, made a world of difference)
Comments
Queen storage bed
![](/sites/default/files/28B69A1B-1707-4456-A7F9-09DD33528675.jpeg)
I started with the queen storage bed plans and modified them to fit my needs. Two drawers on each side, one at the foot, all the same dimensions. I left open bins at the head of the bed because there wouldn’t be room to open drawers. They can be used for books or electronics, whatever my son wants to keep close. I mounted a power strip with USB ports inside the open bins (out of sight) so he can charge his electronics.
I used birch plywood for the benches, pine for the drawers. I painted the drawer boxes navy blue, matching one wall in the bedroom, and used edge glued birch panels finished with clear water based semi gloss poly for the drawer faces.
This is is definitely my most difficult project so far, and the one I love the most.
![](/sites/default/files/33EEBFDF-3BBB-4E51-94A8-83D4E829F7D9.jpeg)
![](/sites/default/files/3942B069-758A-4F61-8C4E-0E551FC42CDC.jpeg)
![](/sites/default/files/A1CB57D7-16E8-49BE-9526-B0D4A9919FB6.jpeg)
Navy blue latex semi gloss on the drawer boxes
Comments
Fancy X Desk - Altered
![](/sites/default/files/3154831982_1375979172.jpg)
I love the fancy X desk plans but made some adjustments to suit my tastes better.
I used 4x4s instead of the 2x4's for the legs and 2x6's instead of 2x12's for the top. Once I have everything built, I hand planed the desktop to even out the 2x6's and make it feel less like standard hardware store lumber and more like an old handmade farm table. I love all the slight surface imperfections that the hand plane left behind.
As always, building it doesn't take long, but finishing it does. I only had about 6 hours invested in the build, but doing the many layers of stain, paint, shellac, and poly took several more days to complete.
for the base of the desk, I started by staining it with a vinegar and steel wool concoction. After letting it dry I lightly sanded off the chalky surface, leaving the aged looking wood. I then used white primer and a rag to give it a white washed look. After the white washing was dry, I used fine steel wool rubbing the surface to reveal some of the faux aged wood below. CAUTION: If you plan on using water based stains, paints or sealers, you may want to avoid using steel wool to avoid rust spots.
For the desktop I alternated coats of Morish Teak and Rosewood from ZAR until I was happy with the color. I had some troublesome knots that kept leaking sap so I sealed them with de-waxed shellac. before sealing everything with polyurethane.
I'm really happy with my new desk. Thanks for the inspiration!
![](/sites/default/files/3154831983_1375979172.jpg)
![](/sites/default/files/3154831984_1375979172.jpg)
![](/sites/default/files/3154831985_1375979172.jpg)
![](/sites/default/files/3154831986_1375979172.jpg)
![](/sites/default/files/3154831987_1375979172.jpg)
TOP = Morish Teak and Rosewood stains from ZAR, SealCoat Shellac from Zinsser, Satin finish polyurethane
Night stand
![](/sites/default/files/IMG_1624.jpg)
Built two of these to go with the mantel headboard. we used 3 different pieces of molding that are in the same sequence as the headboard. To save money I made the angled feet rather than using the pre fab bun feet. We used a piece of lexan to put on the top to protect against water. When we attached the top trim we made sure it was level with the lexan I made the crate to fit so that we had some type of storage. The color of the crates match the center of the headboard
My Awesome Corner Cabinet
![](/sites/default/files/diy-corner-cupboard-woodworking.jpg)
I really needed more Pantry space in my small kitchen. Found these plans on the site and set out to make it. Needed a little splash of color to add to my otherwise earth-tone color scheme. Love it!
![](/sites/default/files/20180528_191602.jpg)
Comments
Mon, 05/28/2018 - 19:47
I needed more pantry space in
I needed more pantry space in my small kitchen. Found these plans on the site and set out to make it. Needed a little splash of color to add to my otherwise earth-tone coleor scheme.
Love it!
Outdoor sectional
![](/sites/default/files/B0FCCCD3-9D1A-4770-94AE-A5922C4958DE.jpeg)
Revamping the backyard with your awesome sectional plans!
![](/sites/default/files/9BE25249-C996-4C10-826B-249861D44084.jpeg)
Comments
Designer Toddler Beds
With the third baby set to arrive in several months, I needed to take back the crib from my youngest and consolidate the girls living space. After scouring the Anna White site and looking dreamily at plans and general building instructions for several months, these beds are what I came up with. A combination of the Lydia and Farmhouse beds, I made alterations for the wood I had on hand and the final product I envisioned- complete with decorative trim and even wallpaper! My girls love them!
Comments
Kitchen Ledge Shelves
![](/sites/default/files/3154832175_1376153288.jpg)
I built ledge shelves for our kitchen using reclaimed wood I painted teal, then silver, then flat black (Napoleon).
Love having them. :)
![](/sites/default/files/3154832176_1376153288.jpg)
![](/sites/default/files/3154832180_1376153288.jpg)
![](/sites/default/files/3154832181_1376153288.jpg)
![](/sites/default/files/3154832179_1376153288.jpg)
![](/sites/default/files/3154832178_1376153288.jpg)
I wasn't sure what color I wanted. I didn't seal the shelves, just in case I changed my mind again, but I love how knicking it brings out the teal or the silver under the black!
Comments
Sat, 08/10/2013 - 19:19
Great shelves!
Great looking shelves, and it's neat how you got these in the corner shape. It adds so much storage! The color looks perfect with the tile and counter. Love the little flecks of the other colors peeking through too! Great job!
In reply to Great shelves! by JoanneS
Sun, 08/11/2013 - 10:15
Thank you!
These ledge shelves really are my favorite shelves right now. I plan to add a few more to my daughter's room, but I'll wait to make those until after I build her dresser. :)
Tue, 01/14/2014 - 11:42
Lovely!
I love your adaptation of the original design. I have been looking for an example of someone who made this plan into a wider shelf. Has it held up well? I was worried about the stress on the joints when you make it deeper. Has yours handled the weight? How wide is the bottom piece?
Mon, 04/21/2014 - 11:14
Wider shelves
I've had the shelves up for about a year now and it's still in the same spot. The corner shelves are the most sturdy, most likely because it is supported by screws in two perpendicular walls. Its filled with mason jars (re-used, cleaned pickle jars) of pantry items, and there is no visible stress on the joints that I can see.
The smaller shelf is not as sturdy because I could not locate a stud (that didn't have electrical wiring close to it). I used wall anchors and it sags ever so slightly forward (about a millimeter). We only keep our drinkware on it, however.
The base of the shelf is made from a 1x8 (7-1/4" wide). The full width of the shelf with the 1x4 back and 1x2 front lip is about 8-3/4" wide.
I hope this comment reaches you and that it helpful!
DIY Rustic Industrial Bar Cart
![](/sites/default/files/rustic-industrial-bar-cart.jpg)
Hi friends!
Jen Woodhouse here from the House of Wood.
Today I'm sharing with you the building details for this beautiful Rustic Industrial Bar Cart.
This DIY bar cart has a lot of neat features: a bottom shelf tall enough to hold full size wine bottles and decanters, a hanging stemware rack, and a removable serving tray on top! What more could you need?
Be sure to tag me @jenwoodhouse if you share photos of your build on social media. I'd love to see it!
You can get all the details for this build on my website www.jenwoodhouse.com.
Grace's Bookshelves (Just One)
![](/sites/default/files/DSCN7760.jpg)
I just made one of the shelves instead of two like the plan calls for. It's painted a dark brown to match the bunk bed that I previously made for my girls. Mine was a little more expensive because I used 1x12's instead of plywood.
![](/sites/default/files/DSCN7701.jpg)
![](/sites/default/files/DSCN7756.jpg)
![](/sites/default/files/DSCN7761.jpg)
2 Coats of Valspar "Barista"
1 Coat of Poly
Comments
Mon, 07/11/2011 - 19:14
Beautiful work
You did a beautiful job! Where did you get your pretty pink storage bins? I've been looking for some like them for my granddaughter's room.
Mon, 08/29/2011 - 19:56
They're just the closet maid
They're just the closet maid bins. I think I bought mine at Lowe's.
King Farm House Bed
My husband designed this after the farm house bed. I wanted panels on the head board and foot board to "dress it up a bit" and storage drawers. He did a wonderful job. I don't think I have ever had a more prized piece of furniture. Now to find some tall night stands.
![](/sites/default/files/3154832292_1376330505.jpg)
![](/sites/default/files/3154832293_1376330505.jpg)
![](/sites/default/files/3154832294_1376330505.jpg)
![](/sites/default/files/3154832295_1376330505.jpg)
![](/sites/default/files/3154832296_1376330505.jpg)
Comments
Thu, 07/23/2015 - 07:56
is there anyway to get the
is there anyway to get the plans from him? for the adjustments and cubbies he made?
Wed, 09/23/2015 - 11:54
Adjusted plans
Any chance you or your husband would share the adjusted plans to include the storage under mattress?
Thank you so much! love your site and your work!
Thu, 01/21/2016 - 21:52
Plans for bed
Hi Ana!
I was wondering if you had the plans available for this bed with the drawers underneath and the head and foot board ?
:) thank you!
vanessa
Wed, 09/25/2019 - 10:40
King Bed Frame
Ana,
Can you provide plans with pics for this bed? My wife wants it and I got tasked with doing it.
Sun, 06/07/2020 - 06:27
King size bed plans
Do you have the plans for this in a King size bed with the drawers? This is a beautiful bed!!
thank you!
Tue, 01/26/2021 - 12:26
California King Bed Frame
I would love to have plans for this bed with draws for a California king bed if at all possible.
Stove Top Cover
![](/sites/default/files/20150903_201636_0.jpg)
Stove Top Cover for more counterspace.
![](/sites/default/files/IMG_20150903_201955_0.jpg)
Comments
Mon, 08/12/2019 - 03:56
Plans for the project
Without the plans it's hard to understand how it was built. Do you have the plans
Ultamate Roll Away Workbench
![](/sites/default/files/pinkpin.jpg)
Adjusted the shelves slightly. Love the roll away portion.
![](/sites/default/files/20220513_160257.jpg)
![](/sites/default/files/20220513_160249.jpg)
![](/sites/default/files/dusty2.jpg)
Comments
Sun, 05/15/2022 - 11:55
Amazing build!
This is gorgeous, thank you for sharing! Just shared on our facebook page, we'd love to give credit if you'd like to respond with your name:)
My first crack at it! Hyde console:)
First project for actual furniture ever. This stuff is better than a good book that you can't put down. I am so addicted!
My Daughters Loft Bed and Room
![](/sites/default/files/3154832453_1376535120.jpg)
This was a family summer project. I built the bed and furniture...my wife and daughter did all the painting and picked out the accent pieces!
![](/sites/default/files/3154832454_1376535120.jpg)
![](/sites/default/files/3154832455_1376535120.jpg)
![](/sites/default/files/3154832456_1376535120.jpg)
Comments
Cabin Bunk Bed for Dima
![](/sites/default/files/EUt779Lt80jwTkXYxZIBlH_y1fT6D6MN_TiOz6OKC3Q.jpeg)
My wife, grandchildren, and I have spent the last 8 months building 2 bunk beds from the site. First we build this cabin version for my grandsons and then we built the sweet pea version for my granddaughters. I thank Ana White for using this website to enable amateur wood workers like myself a tool that enabled us to create a great piece of furniture that they use every day and collect childhood memories and know how much they are loved. Thank you Ana White.
![](/sites/default/files/Dw7KAHFKBKuYh_nOQQHfZFOKckakqRVQsCAO9IRKb8E.jpeg)
![](/sites/default/files/H4L14CQIiQIEkMgIASAcCDtI2q6b2jOeDp30jeCZEno.jpeg)
![](/sites/default/files/gC78sRlFdYeGJOUjRC_rSd4de2Ypvh9b5zI2Ip5Ig7M.jpeg)
![](/sites/default/files/S0_nN220Yt6VLdGzTlpL1ze4ykZIbHbnyYhgVLVNq0c.jpeg)
![](/sites/default/files/yBaYsvk7wcA1TPniy50GsN2zKPDbhVo7cSUpdVe62M4.jpeg)
Comments
Wife's Kindergarten Classroom
Been a while since I had time to actually build anything worth posting about! My wife wanted some items for her Kindergarten classroom this year, so built several items, most inspired by the Farmhouse family.
Comments
Octagon Picnic Table
![](/sites/default/files/umbrella1.jpeg)
Just completed the Octagon picnic table. I added a couple of features to mine, namely a center hole for an umbrella and support blocks around the center point under the table to lock in the umbrella post on the lower base. Finished it in time to have lunch AND dinner on it today. This took from Monday through Thursday morning for me, but some of that time was me waiting for supplies along the way. In reality, I think this can be built in one day, with paint/stain curing overnight and final set up on the morning of day two.