Community Brag Posts

Our 18 month old was constantly climbing out of her crib so we got a cheap toddler bed and tried it out. She liked to go under the bed and almost always got one of her legs stuck between the slats on the under side of the matress. 

I decided to build a bed and found Anna White's Toddler Farmhouse bed plans. We modified the plans ever so slightly to make it a platform style to address our original issue.

For the stain, we used 1 coat of steel wool and white vinegar that sat for 24 hours and prepped the wood with 3 bags of black tea steeped in boiling water for 10 minutes. The color was exactly what we were looking for.

This is my first project and there was a good amount of learning involved but it turned out amazing!

Here is something I finished this weekend!

I did change the measurements to 30" across since I only need 2 stockings. - Krystal Sims on Facebook

I made those for the christmas present of my hoby.

Followed Ana's plan exeactly same and it worked well for my need.

Thank you, Ana!

Built this table from Ana-White plans and the benches from Rouge Engineer plans.  Fun build and looks great.  Easy to customize to fit your dining space.

Our living room is long with a vaulted ceiling. I wanted to find a way to break up the length of the room visually, and Ana's ten dollar ledges were the perfect solution. They also had a great price tag!

I changed the the plan just a tad to break up our wall space, creating two ledges - one 6' and one 4' long - instead of one that is 10' long.

The only other variation we made to the plan was adding kreg pocket hole plugs (http://www.kregtool.com/solid-wood-pockethole-plugs-prodview.html) since we hung our shelves high enough to see where screws were drilled in.

After shelves were assembled, I painted them using Lowe's Antique White in satin finish. This project was easy, fast, and very affordable! I love that we can change out the items on display either seasonally or whenever we want a fresh new look. These ledges would work in any room and even instead of a chair rail in a dining room... and the lip on the front makes them safe so that nothing will slide off!

We had been looking for a headboard for our son for the longest time, but could never find anything we liked in the shade we needed in the stores. Fell in love with this bed, thought it was one of the more "boyish" styles that I've seen which was what I wanted for my son. Asked my husband if he thought he'd be able to build it, he said he'd try and voila! We, however, modified the plans a bit and only made a headboard, but overall, I love it!

We started this late 2013 and finished it June 2014. We used an old IKEA bed hardware for the middle support for the full mattress. We had to use Hemlock Fir "white wood" for the 4x4's (found at Menards in Wisconsin). We used Satin polyurathane from Minwax and allowed a month for the fumes to die down. My boys and guests seem to enjoy the bed. 

My wife used the benchmark media console plans with her own idea for the doors

Rural Bus Shelter with 3/12 shed roof, designed to keep your kids out of the elements as they wait for the bus. Shown with log siding and 2x trim. Can be constructed on a slab on grade or remain portable with pressure treated runners and wood floor as shown.

Upgrade further with electricity and insulation for those really cold and dark climates (ie. Washington, Oregon, Alaska, B.C.).

I will make the plans for this shelter freely available to all that are interested.

I had my nephew build this outhouse for our new 70 acre lot - no neighbours in sight so I had him put in an acrylic window (with a view).  I left off the deck and had him put the boards tight together so 'critters' didn't get in as easily. I made a sign for above the door - 'Waste Management' for a touch of humour.  The plans were easy to follow and I love it.  Thanks, Ana.

This is my first ever wood project. I helped my dad frame his basement a couple years ago and figured that a hand built table would be a nice piece of furniture to have as my wife and I begin to start a family. I've been gathering tools for a few months to begin making furniture and I chose to start with this piece.

I had read that a few people found that the 2x6's on the table top caught crumbs so I picked up a cheap, used table saw and squared off the edges so that the table top would be more consistently flat.

For the legs, I wanted to use 4x4 untreated posts but could not find them so I used the table saw to cut down the 2x4's so that, when screwed together, they formed 3x3 legs. I then used a 0.25 inch round router bit to sound off all the edges on both the legs and all exposed edges around the outside of the table.

I finished with two coats of early american stain and in between applied a distressing technique I picked up from one other blog post.

I am 95% happy with how the table has turned out. Structurally is it very sound. If I was to do it over I would have screwed the entire tabletop in with pocket hole screws to eliminate holes on the surface.

This is a matching book shelf to the 55-fancy-x-desk.

Build Instructions:

http://www.instructables.com/id/Rustic-Book-Shelf-or-TV-stand/