2x4 Truss Style Farm Bench
Truss bench made from reclaimed 2x4's
Truss bench made from reclaimed 2x4's
Beautiful table riser centerpiece ( with lights!) from Ana White plans. This made a lovely Thanksgiving table. Very easy to make. Thank you.
Maureen Kane
I made this headboard last year. I got tired of my 5 year old shutting the door on my 2 year old, it was a large heavy old wooden door, so I took it off the hinges and had it sitting there staring at me forever. So I decided to make a headboard out of it. It was simple, just using the basics of the farmhouse bed around it. I love it :D
Entry Way Table. Although not made from one of your plans I wanted to share it as is the biggest thing I have made so far from my own design.
I essentially used the same materials as posted on Ana's website, with the addition of modifiying the plans to fit to my needs. I used the same hinges, however got mine from home depot Canada for 3 bucks each! woot woot. The paint was a high gloss enamal with 4 coats on the top or so. The legs were bought from a local hair pin leg guy and the cabanit doors were something a lil more special. The doors were made from 3 really really really old fence boards, that were sanded down and stained with golden oak minwax then 2 layers of oil polyurathane. Since the boards were a little more fragine than i thought, i attached them together with an extremely thing pieace of birch plywood and screws on the back. I really loved this project and pleased that ana replicated it on her website. Thanks Ana!
My first wood working project. Made it a little taller and added a shelf.
Corn Hole Boards by Tim
Anther creation of my own but this would easily be created from Ana's plans for this wall shelf. There isn’t much cupboard storage in our kitchen so when friends gave us a sideboard they didn’t have use for & it fit perfectly in one of our kitchen’s oddly spaced corners we were thrilled. It became our “Toasting Station” where the toaster & Panini grill are. I decided that we needed matching shelving to house our “Carbs” since it was much easier to make toast & sandwiches when the bread was right above the toasting implements.
First project from own design and wanted to share as pretty pleased with how it turned out. Sides are 4 by 2s with a routed 45 degree grove on each edge to give some detail. Wanted to make the drawers stand out so I added the edging detail.
After moving from Hawaii to Maryland, I was finally able to make good on my promise to make a new bed for Suzie. I made very few minor modifications to the plans as posted.
A great way to display books in the kids playroom. So easy to make.
Farmhouse table with matching floating shelves.
Judd H
This was my first project using an Ana White plan. I thought the plans were easy to understand and follow which made the project go smooth. I am a fan of painted and distressed furniture so I went with that look for this project. After painting the tables I used a hand sander to scuff up the corners and then added "worm holes" using a hammer and nail.
I used the plans from your site to build this table for a friend. I made a couple of little design changes just to make it look different. The plans were very easy to follow, and I had a lot of fun putting this together. I did have a small problem with the pine stock wanting to bow and twist, but that was taken care of with the planer and sander.
The bed is a mixutre of the loft bed plan and the farmhouse loft bed plan with some modifications of my own thrown in. I liked the headboard look of the farmhouse loft bed and incorporated it into the plan. I also made the side rails out of 1x10's to make it more beefy looking and I think it works better. The supports for the mattress are made out of 3/4" bookshelves, cut down to fit as it added more support than 1/2's. The desk is based off the loft bed desk plan, but I made the top piece out of 3/4" MDF. I think it makes a nicer look. I added 1x2's to the face of the bookcases and desk top to finish it off and make everything look more finished.
I also added a programmable, remote controlled, RBG LED lighting system under the bed. My daughter can go from dance party to mood lighting depending on the situation. This bed will deliver.
I also modeled everything in 3D CAD using Solid Edge. This was a very helpful tool to get all the measurements correct as well as incorporating 3 different deisigns blended with my own.
Followed the overall plan to build the console for my daughter's birthday. Made several modifications including using (3) 2 X 6 inch pine boards attached using Kreg pocket hole screws for a seamless and sturdy top; substituted barn door hardware rollers with Barton Kramer 1-1/2 in. Patio Door Wheels providing a smooth glide and budget friendly alternative; added more partitions to accommodate extra shelving; and utilized u shaped brackets lined with felt to keep barn doors in line.
Used Kreg pocket holes to assemble the unit which gave us the ability to easily transport this rather heavy and
6-foot large console. My daughter was extremely pleased and actually many of her friends wanted to know where she bought the unit. This was truly a rewarding experience and confidence builder for me and my wife.
I chose to adjust the great design to have a free standing tree with backing and a live bark base. Fun project.
Chip Brown
This was a pretty quick and easy project. My third one from this site, as well as being my third one ever. We rented a mitre saw to cut the wood (and cut wood for a few more projects we had on the go at the same time), and then it was just a matter of staining it and putting it together. The staining and waiting for it to dry actually took a couple of weeks, mostly because we don't have a lot of room to do that, so couldn't do it all at once, and it wouldn't stop raining. Once we actually had that done, drilling and assembling only took 2-3 hours at most. (Maybe even less, but hard to judge as I had two children helping the whole time.)
I've put a video of it in use on my blog as well. :)
Day one...Two of us making cuts and starting headboard and footboard.
Day two...Working solo, had to get creative in order to add posts and 24 and 26 to top of headboard. Sanding and staining complete.
Day three...Two of us again. Built frame and added slats using decking brackets rather than screws for ease in disassembly. Attached headboard and rails with bolts.
Only issue not specified in plans was how to attach frame to footboard. But we made it work.
Thanks, Ana!!
Our rabbit lives in a 2'x6' Xpen cage set up in my tiny sewing room. As cute and fluffy as he is, I couldn't help but see his space as intruding on some valuable sewing real estate. I had to do all my fabric cutting on the kitchen table and lug everything back upstairs to the sewing room when it was time to eat. Laying out patterns had to occur on the floor. I thought it would be quite nice to have a table in the rabbit's corner ... :) I've used 2 of Ana's plans for bookshelves years ago and so I KNEW I could come up with a simple table plan and execute it. It took me about 10 minutes to formulate my plan and about 4 days to build it. :) The top is removable so we can easily move the table ... otherwise it would be a real back-breaker!
Note: The estimated cost is $100, but that's because I had supplies other than wood to buy. Screws, glue, stain, etc. I'd say it was $60 in lumber.
Thanks Anna, great design great plan. My first attempt at a chair. Was a lot of fun , just have to build 5 more, my wife loves it.
Bob
Duluth MN
Tue, 04/28/2020 - 09:21
Thank you so much for building and sharing a brag post! Looks great! Can't wait to see the other 5!