Modern farmhouse bed with nightstands
I made this beautiful bed in just one (long) day (12h). The next day I made the nightstands with the scraps of wood from the bed.
I made this beautiful bed in just one (long) day (12h). The next day I made the nightstands with the scraps of wood from the bed.
Loved building this table. Look forward to building more! Thanks Ana!
Easy, fun great project that my husband and I did together. This project cost about $202, and I will take that price over the price that you would have to pay in the furniture store any day. We found some great wood at Lowe's that worked perfectly and gave it the "rustic" look that we like. Thanks Ana for the plans and sharing them with us.
Wed, 05/16/2012 - 19:01
That's a fine quality piece of furniture!
Why can't I get dark walnut stain to look like that?
Wed, 05/16/2012 - 19:45
Debi_G, I've had lots of trouble getting stains to look the way I want too. What I've taken to doing is either mixing my own (see http://claydowling.com), as well as trying out various commercial stains until I find one that satisfies my desires. Good use for your scrap.
So far the best commercial stains I've found are from General Finishes. They're designed to sit partially on top of the wood, which prevents some of the splotchy and washed out look that make some stains unpleasant to work with.
I made these boxes with my dad one afternoon. We had a great time! We wanted our herbs to be close to the kitchen and still get plenty of sun, so attaching them to the deck railing was ideal. I made them out of timber decking with pocket holes, and attached them to the railing with metal brackets underneath.
This was by Far The Best Sectional plans on the Net! Very Easy To Make! Thanks Anna white
This is my first big project. It took about 5 days with the help of my 3 yr old little boy. I made a couple of modifications. I took the size down to 6 ft to fit our current dining room. Essentially I just took 24 inches off of the table top and the long cross braces. For the diagonal cross pieces, I just clamped the wood on the side and marked where the cut was needed. Somehow though, I ended up needing 8 2x4’s... It turned out a lot better than I expected. Although I wish it was explained how they attached the table top. I ended just screwing in from the top. Wish there was a way to avoid this, and the ensuing shown screws, but it will do for now!
My daughter was turning 4 and we were expecting our 2nd child in a few months and needed her crib/toddler bed back to start setting up the nursery. After googling fun big girl beds for a few weeks i came across the plans for the cottage bed and decided to sit down with my husband and decide if we could build her this bed. by building instead of buying the bed of her little girl dreams we were creating many fond memories with her and a real attatchment to it so she would actually sleep in it. We went through alot of the other brag posts first and picked out a few things we liked from each and made a few modifcations. I felt the spindles around the bed needed to be taller to keep her from falling out of the bed. We also made a door way under the slide that is now a little secret fort for her to go in and read her books and have quiet time. Under the steps my husband made a closet for her dress up clothes utilizing as much of the space under the bed as possible as it takes up most of her bed room We painted the back wall under the bed with chalk board paint to give her a art space under there as well. In the end it took us about a month to build the bed working on it on the weekends. We spent around 500 dollars including the purchase of a few tools we diddnt have and needed like the kreg jig and all the paint and princess decals. She loves the bed and my very amazing handy husband has been approached by many friends and family members to make one for their children as well.
I wanted to build something a little bigger than the Rustic X Console table. So my wife and I came up with the plans for this 5 shelf "Rustic X" Book Case. Took me about 20 hours to build over a three day weekend.
Tue, 03/04/2014 - 10:23
I like how your bookcase is wider but more narrow. Did you see these plans? http://ana-white.com/2013/08/plans/rustic-x-tall-bookshelf
Wed, 04/16/2014 - 08:18
What dimensions did you end up using?- the proportions look great! Even the shorter legs look great! And did you just use 2x6's for your trip on the top? We would love to follow your design to a t!
Wed, 04/16/2014 - 08:37
We were thinking of increasing the overall height to 84" and the width to 48" (keeping the depth) but weren't sure if that would mess up the ratio.
Tue, 08/27/2019 - 17:53
I think your looks much nicer than the original due to the finished top. It looks complete with the way you've made the overhang. How much of a overhang is it?
I love the rustic x console and coffee table but hated the bookshelf due to the odd looking top, thank you for your inspiration!
I started this project a few months ago for a friend. The build went easy enough and was complete is less than a day. The only issue I had was with the X's. My miter saw doesnt cut past 55 degrees and it called for 60 degrees. I had to eye it and the X's turned out less than perfect. It did give me a compelling arguement to upgrade from my 10" to a 12" sliding saw (we will see how that pans out). The finishing was the real problem for me. Ive had issues in the past with not liking the final color and having to sand the whole project over and over until I finally just settle. I was hesitant on the vinegar and steel wool finish but went for it anyway. The top turned orange, almost like a fresh cedar color. I whitewashed it the following day and roughed it up with some light sanding. It looked great. I added poly and the top turned orange again. It was horrible. I had to sand it and start over. I then went with a weathered grey with a whitewashed top coat and it looked great but my friend wasnt a fan. I sanded AGAIN and tried another color. Third time was a charm and the sunbleached stain with whitewash came close to what we wanted to acheive. He likes it, I like it, and eveyone is happy!
I built this for my 10 year old son. His room is not very big so this loft bed provides the perfect solution to freeing up floor space for playing.
I added some toy shelves to the side for additional storage.
The curtain, TV and gaming chairs turn the under the bed portion into his personal "boy-cave" gaming center.
Thank you for the easy to follow instructions. He loves it!
This table was built using the Vanessa's X Picnic Table plans but made plenty of modifications to it. We used 3/4 thick boards and made the table 60 inches long instead of 71 3/4". We have a small dining room and wanted a table big enough for four people so this size worked for us. Since we made adjustments to the length we used less supports under the table top. We made the table top using pocket holes and only two joists were needed. We added extra support between the table top and the stretcher because the table wiggled more than I wanted it to. This nipped the problem in the butt! I knew I wanted to build this table but my concern was finding chairs to suit the table. I ended up getting unfinished chairs from Ikea for $19 a piece and finished them myself. I feel like this project took forever, but that table itself was assembled in a weekend. The finishing process took an additional weekend since we had to do the chairs as well.
My husband built this Rustic X Console table to plan. We love it so much he is now building the coffee table and end tables to match (and I may convince him to build the bookcase too!)
This was a very quick and easy build that was completely finished in an afternoon. My Kreg jig was loaned out, so I have exposed fasteners, but I prefer to let them show instead of filling the holes. I built this with 20" legs to make it a little taller and more comfortable for my height. I also prefer straight lines and angles, so I changed the trim pieces a bit to suit my style. The hardest part was getting the drawer slides lined up. The finish is Rustoleum Heirloom White with a coffee colored glaze. The picture makes one drawer look darker, but it's really just a shadow. I'm in love with this project!
We are stuck at home for the Shelter-In-Place due to COVID-19 so we decided to use the scrap wood left over from our new deck. Because we didn't have the materials exactly meeting the specifications in the directions, we had to adapt the design significantly but we're really pleased with how it turned out. My 16-year-old daughter made it with me so it was a great to get her involved in building
I used your guide for the shiplap fireplace and paired it with some ikea bookcases. Surprised the wife with it and she was completely blown away.
This is the first thing I have ever made out of wood in my life! I'm a quilter, I have never even used a screwdriver, but I followed your plans exactly and made this for my grandchild! I am so proud of this sandbox. (I did talk the guy at Lowe's into making the woodcuts for me).
Thank you so much for this plan and thank you for making it so easy to follow. Sherry
Thanks for the GREAT plans. Slightly modified to allow more space on the top shelf.
Sun, 03/09/2014 - 12:21
Can you please send me the plans for this, send them to [email protected] thanks!!
Sun, 03/09/2014 - 15:23
Lauren,
They are found on this site called the "Kendra Storage Console". Click on "plans" in the tool bar above, type in that title, then hit "apply." The original plans will pull right up.
I made the bed from the plans on this site, I made the drawers using a dovetail joint.Took a little longer because of that.
Sat, 11/30/2019 - 11:34
Excellent work. I like that the footboard is below the top of the mattress. Was that in the original plans or did you modify? Well done.
I really wanted a mantle to hang our stockings and to have some decorations. When we moved in there was just a shelf above the fireplace which was fine but I wanted to make more of a statement. This was a pretty easy project after all of the math was calculated. I made to follow guidelines for the fireplace as well. Thanks dad for that :)