LOVE these....
My mom moved into an apartment and had a bar that needed some bar stools so I made two of these bar stools that she loves.
My mom moved into an apartment and had a bar that needed some bar stools so I made two of these bar stools that she loves.
I made this stroller to donate to a charity fundraiser. I'm very pleased with how it turned out! I routered the edges with a small round over bit, which I think makes it a bit safer for little ones. I attached the 1x2's of the handle 3" above the stroller bottom, which gives it a height similar to other doll strollers. I also decide to change the way the wheels were attached. In the picture, the wheels are attached as the plan shows. I decided I would use (2) 3/8" metal rods as axles, washers for spacers, and an axle cap on each end. This works really well, and the axle caps look nicer than the painted bolts. Unfortunately, I donated the stroller without taking updated pictures!
More Photos and details: https://www.ana-white.com/community-projects/reclaimed-wood-headboard-q…
I used the basic construction of the turned leg coffee table, but used 2x4s screwed together for the legs, added a couple of supports, and made the dimensions larger (38.5" x 62" for a dining table that seats 6). I used pocket holes for all the joints and it came together pretty easily. (One day, though, I am going to build a project without drastically altering the plans. One day.)
Sun, 07/22/2012 - 02:00
Where are those chairs from??
Ps. The room looks great.
Tue, 08/21/2012 - 05:29
The chairs are from Overstock. Here's the link:
http://www.overstock.com/Home-Garden/Steel-Silvertone-Side-Chair-Set-of…
Thanks!
I needed some organization in my small closet, which originally only had one rod and one shelf. This is what resulted, and I made it from scraps from other projects, which is why the closet rods are mismatched...they'll be covered up with clothes hangers soon anyway. I had to buy the drawer slides and one more set of closet rod holders. I had some copper pipe straps and decided to use them as pulls on the drawers. I plan to make some crates out of cedar fence pickets to fit the shelves.
I just got the Kreg Micro Jig and used it on the drawers, which were made out of 1/2" plywood. I prefer to make drawers by using the table saw to create overlap rabbets and then use the nail gun to put them together, but it was 15 degrees outside today so I opted for the micro drill. It went pretty well...definitely caused less splitting in the 1/2" plywood than the regular kreg jig.
Fri, 08/22/2014 - 21:34
I just wanted to give you props on your organizer! It's so cool! I love the drawers and are those casters on the bottom? I looked at yours before I did mine and your comments helped!Thanks for posting this!
Wed, 08/27/2014 - 16:43
I love projects made from scraps - yours is awesome! You did a great job on all those drawers, and the idea to use the copper pipe straps as drawer pulls is so creative!
My son is obsessed with Pokemon, and has amassed quite the collection of Pokemon plush toys. I wanted a simple way to keep them contained but accessible, and this was the perfect solution! I changed a few things in my build to make it shorter and square, and used shock cord instead of rope for more give. My son loves it!
Modified the plans slightly to make each shelf taller. Stained and used a heat torch for the burnished effect. I like it!
I decided to build a table and followed your plans (loosely). You inspired me and now love my outdoor harvest table.
Amanda www.nurtureyourbeauty.ca :)
New dining room with a board and batten, farmhouse table and six parson chairs.
Thanks Ana!
Mon, 03/19/2012 - 18:15
This room is absolutely gorgeous! You did an awesome job- love all the finishes and colors, and the fantastic chairs!
Tue, 03/20/2012 - 23:19
Agreed! Huge accomplishment! I can't believe you made 6 chairs! And they all look so nice and well made! Thanks for sharing, it's a lovely room!
Wed, 03/21/2012 - 01:54
I love the painted chandelier! This is a cool room, and you made the whole thing. wow.
Wed, 03/21/2012 - 09:16
Thank you for all these compliments. I don't speak English very well because I'm french but I will try to make me understand. I built a chair with the modifications to see the result, then, I made all the cuttings with my miter saw for the 5 other chairs, then I made every chair within half an hour. I cut all that it was necessary foam and fabric in one step and I sewed everything for covers. To make covers, I made a paper pattern, then I sewed them in 10 minutes.
I am very happy I found this site with all that wonderful projects. It's my favorite site . Thank you Ana, you changed my life!
Thu, 12/13/2012 - 17:48
The covers of the chairs come out. I used ana's plan to make chairs and covers. I modified the cover's plan to fit the chairs because I made them taller. It is very practical because I have a four-year-old girl even if I have no cat and no dog =)
http://ana-white.com/2010/11/plans/drop-cloth-parson-chair-slipcovers
Thu, 07/18/2013 - 12:37
I love your chairs and especially like the extra height. How tall did you make the backs of the chairs?
We changed the finish of the tables from the original plan, but everything else was the same. We loved the slats on the bottom of the table, and they turned out even better than expected. The two end tables are the first pieces of furniture we ever built, but the plan was very easy to follow without much knowledge needed. The kreg tool and screws are truly magic.
I took on a little bit more than I could chew with this one, but after a little R&I(Resourcefulness, and Ingenuity) I was able to figure it out. I love how it turned out though! Thanks for the inspiration!
Your potting table selection inspired me. Used pocket holes to join and found a remnant granite piece for the top. My wife used it immediately and it also serves as an extra serving table when needed.
Brad L. - Alabama
Put together this rustic x table in about a week of spare time. I finished using Ana's espresso finish tutorial with the red elm gel stain but it was too red after three coats. I bought some regular black stain and put two coats of that on the project and it turned out great.
My wife wanted to incorporate some turquoise into the project. I did not. :-)
We compromised with the turquoise x's. I think the colors go well together.
I spent about $50 on wood and $40 on new stain, spray poly and paint. But that stain and paint will last the next 3-4 projects. So I'd say the total cost for this actual project was around $70.
This was my first ever project I put together. Now I have a list of about 8 things I'll be building in the next few months.
Tue, 02/18/2014 - 15:10
Great looking balance beam! My daughter wants one so bad haha. Oh, and the table is gorgeous too...haha
After finally getting the hang of 2 boys we just found out a baby girl is coming our way... So I decided to take the brookstone plan and make her a changing table a little less masculine. I went with the pull outs in the sides as well. Followed pretty much the way the plans layed out, replacing the drawer with a shelf. Had some issues with the doors with it being my first time making those, all in all I am pretty excited for her to have it
I made this as a gift for my friends son. They are expecting a new baby so I made sure every inch was sanded, and sanded and sanded. This was a fun different build. The slightly angled table legs need extra attention in order to guarantee level.
Loved this project. I bought a jig saw, and I had so much fun. I bought the black and decker one it was around $25.00 and works great for small projects like this one. Another birthday present for a beautiful girl who is turning 5 and I know there is always space for a step stool in the house with young ones. Hope she likes it.
Thank You Ana I have been having so much fun!!
About six months ago I got my first router. I tore up a few boards with it experimenting but mainly used it for basic round-overs. I wanted to learn more so at Christmas Santa brought me the router table. My first real project was to build a project that would be a learning experience as well as produce something useful so I chose the Drill Bit Cabinet. You can see the plans at
http://ct-web2.unh.edu/lee/drill-bit-cabinet.pdf
This project requires cutting rabbet and dado joints. Basic joints but also requiring accurate cutting. There are no nails or screws holding the box together. I countersunk screws into the shelves for stability. The final result is what you see in the pictures. I learned a lot. A great starter project for novice router users. I took two days to complete the project but a knowledgeable worker could do it in a day.
I also deviated from the plans somewhat out of a desire to make the build easier and less expensive:
1. The plans called for cutting boards from a 1x8 but I chose to stay with the full size 1x8s I had in the garage. So the final dimensions became: Height 19-1/2 inches, Width 10-1/8 inch (closed or 20-1/2 inches open), and Depth 3-1/2 inches (open or 7-inches closed).
2. I could only find 30 inch and 12 inch piano hinges so I went with the 12 inch. Works fine. I must say I really need practice installing hinges. Took me two tries to get this one right.
3. The instructions call for cutting the box in half with a table saw but I don't own a table saw. So I cut the box in two pieces using a straight bit on the router table advancing about 1/8 inch at a time until I was within about a 1/16 inch from breaking through. I used a regular saw to finish the job and the sander to remove the little bit that was left. Worked fine.
4. The plans call for screws to act as the pivot for the two tiltable bit carriers. Instead I just inserted 1/4" dowel. Works fine.
Tue, 01/14/2014 - 17:38
Santa brought me a Bosch router table. It was on sale for $148 and free shipping. It has most of the extras and appeared to get good reviews. It also fits my router without drilling new holes. Finding a router table that fits your router without serious adjustments is important so ask before buying. Also use all of the safety equipment and follow all of the safety advice. Have fun.
Fri, 01/17/2014 - 12:23
I will keep all that in mind when looking for one. The router is about a 1980's model craftsman brand. I have a friend that found a manual for it online and he also suggested that a table would make it easier to use. Have you seen the plans on this site for 'Patrick's router table" It is so nice!
Fri, 01/17/2014 - 12:45
You are right it is awesome. I considered building a table from scratch but with a limited background with the router and the great deals around Christmas I felt that the safest route was to go commercial.
Sat, 01/18/2014 - 00:36
Santa brought me a new router and router table too! This may be a great plan to learn how to use it. Thanks for sharing.
Sat, 01/18/2014 - 00:36
Santa brought me a new router and router table too! This may be a great plan to learn how to use it. Thanks for sharing.
Sat, 01/18/2014 - 04:17
Please follow all of the safety rules. That little bit is spinning at 20,000 rpm and when something bad happens it happens at the speed of light. Use eye and hearing protection as well as all of the guards provided. Feed in the correct direction otherwise you will produce a bullet that can penetrate a door. By the way the router produces an enormous amount of sawdust so plug in the vac.
Mon, 01/19/2015 - 09:55
What router do you recommend for a beginner? I'm reading reviews on Amazon for plunge and fixed-base kits and smaller palm grip fixed-based routers. Would I be in over my head with a kit like this? http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/…
I want to learn other joinery now that I've drilled a bazillion pocket holes.
So this was a fun build. I actually finished this 2 years ago, but I never really thought to post it. It took roughly 2 weeks straight to build and stain it, Christmas holiday. I used the kreg jig alot. I also used a ebony outdoor stain. Anyway if y'all have questions let me know and I'll try to answer them as best I can. This was one of my first builds, so be gentle. :)
Four station sewing table. Each station separated by a 15” 3 drawer cabinet. Blind corner includes a pull out shelf/book case which doubles as support for the back corner. Long end supported by a bookshelf which is turned 180 from the original design due to other furniture placement that can easily be changed later. Short end supported by temporary legs. 5th station and additional 5ft. of cabinets on the way. Roughly 10ft x 8ft x 26in. x 31in. high. Wife saw similar on Pinterest which was tagged Ana White but only found brag post so used imagination and basic cabinet design plans modified to meet my size requirements.
Pops’ Workshop
This was my very first furniture-building project. I was pleasantly surprised with how it turned out! It's definitely not perfect, but with some practice I plan to try bigger projects! It was a little more expensive than I would have liked because I had to buy a pocket hole kit that was $40, but hopefully I will be able to use the kit for future projects.
I followed the plans exactly except I used 4X4's for the "footboard' legs. I added molding to all the feet. I also added screw in fence top posts to the footboard legs. I had a small blemish I wanted to hide on the headboard, so I added wooden appliques to cover the mark.
To make the bed easy to move and store, I bought bed rail fasteners from this site http://www.wwhardware.com/wood-technology-bed-fittings-wt8056.