Community Brag Posts

This table and bench were a gift for my wife for Mother's Day. She is in love with them both. Photo credit to my lovely wife. 

I have made many of these ledges and I just love them so much! I love that I can build them to any length or depth I want. I like to use them for more then just pictures. I feel like there will be many more of these in my future!

A buddy of mine brews his own beer (great beer btw) and mentioned that he was looking for some tap handles that he could write on to identify what brews he had on tap.   I decided to help him out...

For more details and photos, check out my DIY blog:

http://www.woodworkingfourdummies.com/blog/keg-tap-handle-diy

Cheers,

Ian

This was the first table that I built and turned out great.  

Easily made from scrap.

Used pocket screws where possible.

Strong enough for a 2 year old to jump in :)

I've been doing only little projects here and there, so when I got an order for a bench, I was a little apprehensive, but of course I said YES!  I immediately started scouring the web for ideas on how to, and what the cost would be to build.  I came across Ana White's modern bench design and knew this was the one.  I priced out all the materials and gave my customer a quote which she, without hesitation, accepted.  The next day, I took a trip to the local lumber yard and purchased all I needed.  Now, here's where I messed up a bit. Like I said, I priced everything out before purchasing.  Well, I priced out the wrong 1x6s which threw me almost $35 over my original budget.  Womp womp, right?  I still made a little profit.  But this bench cost me $100 to build.  The customer ordered this bench for her garden and wanted it to be stained rather than painted.  So, the wood, the decking screws, waterseal, and the outdoor waterproof stain and sealer was my purchase for the build.  Totally worth it!  The bench turned out great!  I am delivering it to her in a couple of hours from now and I cannot wait for her to see it.  I think it turned out beautiful especially for my first!  Thank you, Ana, for making the design so easy to follow! 

I had peformed internet searches on Pet Crates and decided to build my own. This one has a touch sensor small 1 watt light inside so I dont have to keep other house lights on when I am at work. The light has no heat and purchased at Rockler hardware. Shiloh's crib is on wheels and the only thing I screwed up is the width. I could not get it thru the garage door from the house. Had to take it thru the front door and had to take the door off the hinges. Either way I should not ever have to build another one. It has a kitchen cabinet black laminate on top purchase from a damaged piece at home Depot. Half the cost. Should be durable enough for my kids Printer, radio and Cable box. Doors have two hinges per door so they can fold back out of the way.

For my second project I decided to make a small dresser to match the Camp Loft bed we bult last week. I must say it was a great success.  The only challenging aspect was installing the drawer slider properly.  This took quite a bit of time to get it right.  Everything else was a breeze.  In the top drawer I added a little divider so I can seperate undies from socks.

My boys are young, so I wanted to do this without a foot board (I'm always nervous while they play that they'll hit their heads or something). I modified plans from the Hailey bed for the frame, by making it deeper.

This is a great bed for todlers.

Loving this tall entertainment center to fit under my wall-mounted television!

The dogs cant knock over my photos anymore!!!!

Added some fancy trim pieces in the middle to match the trim on the bottom.  So sturdy and hides all my junk!

http://www.ana-white.com/2012/06/plans/tall-corner-media-console

This was modified from a hose bench plan from Sunset Magazine website. I lengthened the front legs to 20 in and the back support legs to 36 in to accomodate a deeper box. It was made from 1x 6 scrap, a 36 in piano hinge, mdf pre-cut letters and two hinge supports. I painted the letters with yellow spray paint and the bench with two coats of exterior satin green paint. I also added a tray made from 1/8 in luan plywood timmed with 1x3 sides and screen molding sliding on a pvc 1x2. The seat was strengthened with additional cleats for sitting. Peel-n-stick decals

I decided to alter the plans to make it 15.5" deep 6' tall and the inside width @ 55" to accommodate a 55" TV. I used bead board as my wife recommended to give it a little more charactor. I also decided to have the drawers and doors on the bottom fit around the openings. Making this in different dimensions and tweeting it made it a much longer project and also having to paint it with 3 coats was time consuming. That being said I am pretty happy with the outcome. Now I just need to start on the side units. I also wanted to thank Ana for all of these wonderful plans. I have done many of these projects and hope to do so many more.

I used the plan from the Clubhouse bunk bed and modified to look similar to a Mathy-by-Boles Treehouse Bunkbed.