Community Brag Posts

I wanted a table like Ana's narrow cottage table, except I just wanted an open shelf instead of a drawer for a basket.

Here is my version modified to fit my needs. Thanks to Ana, of course. :)

This project is fun and relatively quick for the end result. All together, it took just over 20 hours. For the most part I followed the instructions and wood cuts according to the plan. I ended up having to tweak some things and I'm not sure if the error was in the plans provided online or my own error. Probably mine!

I thought I would add that, for the sign, I simply picked a font on the computer and printed out big letters (a size that would fit nicely on the sign) and then used those letters to trace out the border. Then I painted the letters by staying inside the lines! Easy Peasy. I used a small rustic rope and drilled holes in the sign to slip the rope through. I then tied knots so as to hold the sign in place. Works great and definitely completes the set. I thought about skipping the windows, but I'm so glad I did not. They really stand out and look amazing. My son loves to open them and just stare out (who knows what his imagination is making him see).

This bed is great because it allows for another area below. My son likes to turn on a lamp, sit in his chair and read. Thank you SO MUCH for this plan!!!

I found this fabulous vintage metal flat file cabinet at an antique store (Hunt & Gather Vintage Market, in Princeton, MA), but it didn't have a base or a top, so I went searching online for something that I could build.  The Corona Coffee Table plans were going to be perfect!  I just had to make a few adjustments:

1. Build it to fit my flat file cabinet.  
2. I didn't inset my apron 1x3 boards because I wanted the top ones to be flush with the edge of the flat file cabinet, and then I wanted the bottom ones to match.
3. There was a "lip" on the top of the flat file cabinet, so I had to build a thin trim around the bottom edge of the table-top.  This lip keeps the top from sliding off the flat file cabinet, but just to be sure there wasn't any wiggle, I put a bead of silicone around the top of the metal cabinet and then placed the wood top on.  

LOVE how this table turned out!  It's counter-height and the perfect centerpiece for my craft room.

Not much to say, just a quick project to use up some scrap lumber. Better to use it than burn it. 

I am close to completing an outdoor set with only the table to go. My parents are going to love this at their new house they are building!! I found the cedar 1x4's at home depot for about six dollars a piece. I painted the base a basic semi-gloss white before I built the bench. It's so much easier to paint first and build later. I have a few more touch ups but I am happy with it. I used the Kreg Jig Jr to screw in underneath($40), which made this project and every project I've done so far that much easier.

This was my first "real" project other than making a small bench to hold my miter saw in order to make this project! :)

Saw these plans and instantly fell in love. I knew my daughter's birthday was coming up soon (she turned 4) so I got to work!

I used Poplar wood that had different nominal dimensions than the standard making this project not nearly as easy as what it should be. A lot of headaches, but seeing Tatum's smile on her face when we revealed her surprise made it ALL worth it!

I mostly used my Kreg Jig and Kreg screws. Used my nailer to tack up all trim. used wood screws to secure all of the walls together through the legs.

For the stairs, I purchased a large bathmat from Walmart and cut it to fit each step. I tacked it down with some staples and adhesive. I used 12" continuous hinges for the stairs and they worked perfectly.

Keep in mind other expenses, as the bill can increase rather rapidly!

My total wood bill was $398...but I used Poplar. If you go with pine, it will cost you less. $40 for primer and paint. $100 for new twin mattress. $30 for protective mattress cover. $75 for pottery barn quilt set (eBay). $13 for carpet on stairs. $24 for hinges ($8 each)!! $28 for 2 sets of sheets...bringing the grand total to a whopping: $708!

This is my 2nd built and it was a fun one.  I built this table for a friend of mine and she wanted a different look to the table.  She picked Patina Green and Snow White paint for the base and legs.  First I applied the white paint, let it dry and then applied a very small amount of the patina green and dry brushed it in.  After it dried I used my sander to blend it in and have some of the wood grain to show.  On the table top, I applied the stain and let it dry over night and then sanded down (lightly) so the grain would pop.  She loved the different colors and look of the table.  She had the perfect chairs to match the rustic look.  Excellent project!

I wanted a new bed that was a little taller that the irobot vacuum could get under and the dog could not. Altered the modern queen sized farmhouse bed using mostly pallet wood to come up with this. Overall cost about $65 with the lights and all. 

Problem: I want a serving table. I love the Rustic X Bench. Solution: Longer legs! This was made from the Rustic X Bench plans. We built two. And they serve us well. We love them. They are small enough to move around and use for all kinds of purposes from serving outdoor meals to holding the screw gun while I clamp the next ana-white inspired project (it was my tool holder/work bench when I built our chicken coop). Easy project made super cheap that works perfect for every outdoor serving table need.

My husband and I made 2 of these for my 3 year olds "Picnic Birthday Party", and they worked out great! We will definitely be using them for a while! They took about a week off and on since I just had a little time each day to do them, but I could have gotten them done in a couple easily. Very fun, easy project! We ended up staining the bottom support pieces and painting the top pieces a light blue, I love how it turned out!

I found these plans and told my husband he had to make it for our grandson's 2nd Christmas.  So.....he did!  I was so happy with the outcome.  We didnt put in the groove on the front & we used the Rockler torsion hinges.  I chose the letters and painted them for his name.                    We are now beginning a new one for our new Granddaughter for this Christmas!  

It gets lots of use and will be a treasured gift from Grammy & Grampy for years to come!  

It took me till the end of the summer but I finally finished my awesome wood cooler project! Check that one off my to-do list.

I've now made two Simple Outdoor Lounge Chairs and can't get over how sturdy they are! I also modified mine to have a 1x6 arm rest, but I ripped the back part of the arm rest so it tapered down to the 4" on the back side. I also made the chairs an inch taller on the legs since my family and I are tall.

Our recent Taylors Console project. A nice, easy project. We're very pleased with how it turned out!

I so wish I had taken a before picture! Last summer we did a lot to make over this bathroom. Previously the cabinets were a birch color with a white door (gross). The faucet was one that came with the house, cheapo builder's grade, a tacky medicine cabinet, and that oh so attractive Hollywood lighting. So we painted the cabinet black, replaced the medicine cabinet with a nicer black mirror, replaced the faucet and lights. That had it looking pretty decent, but the wall above the toilet had 3 small pictures hung rather oddly to hide some poor patch jobs from a busted towel bar. So when I saw the plan for the bathroom shelf I was thrilled! I made a few adjustments to the size to meet what I wanted and got started. I also had an extra 30 minutes before a birthday party we were leaving for and had some scraps already the right size for a simple step stool.

Slightly based on Ana White's husky farmhouse table, this table has 4x4s as legs and a nice, thick planked top with breadboard ends. It will easily seat 6 and will seat 8 in a pinch! I also build a bench to match, using the same concept, just smaller dimensions.

In need of outfitting the spare bedroom for overnight guests I came upon this site and found the storage bed plan we liked.  After building the bed of course a dresser was in order.  My sawyer has some northern white pine that came from the Wisconsin Northern State Fair grounds in Chippewa Falls.  Having never worked with white pine before I found it rewarng and was happy with the finished product.  Hope our guest enjoy it as much I had building it