Community Brag Posts

So appreciative for the plans. This was one of the bigger projects I've taken on but I had so much fun with it. A client of mine actually sent these plans to me because she wanted this exact bed with headboard. I was a little apprehensive at first because I haven't normally done a lot of custom work but it was a lot of fun. 

I followed the plans except for the top, I used a 2x12, 2x4 and 2x12 pocket holes together.

Burnt the wood with a torch and stained over.

Thanks for the plans!

Questions? [email protected]

I saw this bed and just had to have it for my daughter. She loves it so much and it looks great in her room. It was easy to make, but very heavy. We were very meticulous to hang, we might have spent more time hanging it than building it :) There is more info on my blog.

I needed to use my small coat closet more efficiently (observe the disaster in the before picture!), so I installed built-in shelves along a side wall for all our board games. Not a plan really, but just a simple solution. Measure the height you want your shelves to be, install a 1X3 at that height on either side wall, making sure they are level and secured to studs or anchored (Mine are 1 foot apart up to 5 feet). Then install plywood or solid wood shelves across the supports. Screw in to secure and you've got functional, inexpensive shelving, built to fit your unique space.

Our version of the Brandy Storage Bed in king size.  Added a headboard made from from weathered wood leftover from building our house.  The "scrap wood" pieces used to cover the bottom are a mixture of rough cedar, old wood from a grain bin and general 1X scraps.

Thanks so much for the plans Ana, we love our new bed!! 

Fell in love with this table! Couldn't wait to build it. Found a great mill that had raw stock of a variety of woods. I chose White Ash  because if the hardness and beautiful grain. They planed it to 1-3/4" thickness. Modifed the width to 50" and turned the truss supports underneath to add extra support for the table top due to the weight of the White Ash. Finished with provincial stain and 6 coats of hand rubbed poly. Used wood bleach on the 4x4's to take the red tint out before staining. Worked great!

My sister needed an extra tall stool for the bar her husband built, so I adjusted the Parson Chair plans to make them fit. I included the Sketchup model that I used in my blog post.

I have been looking at sewing furniture for years, but the prices always made my jaw drop. I have a small craft room, so I needed a table that could also triple as a cutting table and fabric storage. Thank you so much to Ana White for this plan! I built exactly to the plan in The Handbuilt Home, and it's the PERFECT size.

So the sewing machine can sit flush with the top, making working on big sewing projects way easier, I traced the outline of my machine on the MDF and cut it out with a jig saw. Then I built a small shelf using a 1x12 scrap and 2 1x3 scraps. Putting the 1x3s on top of the 1x12 made the shelf 3.75 inches deep, which is exactly the depth I needed. I attached it to the underside of the tabetop using a pockethole jig and screws.

I built 2 boxes using 1/4 inch plywood, and installed drawer pulls on them, giving the illusion that the table has 2 drawers built in. This is where I keep my ugly stuff--interfacing and fabric scraps.

I got the color scheme for the table from the entryway console plan in The Handbuilt Home. In order to make the MDF top look like it had a wood grain, I applied mahogany gel stain with an old washcloth in very thick strokes that spanned the length of the tabletop. It soaked in and lost the "grain" look in some places, but the majority still looks like wood. I did have to apply several coats of polyurathane over the stain; the MDF has a prickly texture that grabs fabric and makes it hard to feed through the sewing machine.

My only complaint is that I didn't quite think through the fact that seating is bar height and I'm 5'7". It's a little difficult to reach my sewing machine pedal. I may build a small stool for the pedal to sit on so I don't have to half sit/stand to sew.

This is the first woodworking project I've done alone from start to finish: from going to Lowe's and picking out the wood, to cutting the wood with a circular saw, assembly, and finishing. (My fiance did carry it up the stairs for me. :) )

I'm so in love with this table! And now to finish the quilt I started 6 months ago....

I made this Christmas tree shelf using the plans here.

I modified it by adding on two shelves so that it could accommodate the 6 hooks I needed for my family's stockings.  I also hot glued a string of lights to the perimeter.  This is serving as our Christmas tree due to space constraints, so I wanted it to be "fancier" and more like an actual tree.

I think I did ok for my first real build and my family seems to really like it.

I used the basic plan as described on the website. I did differ on the tabletop and the legs. I used 3 slabs of 300+ year old cypress grown and milled locally here in Mississippi. I also kept the live edge on the outside boards. I bought my legs from 59Design. They were identical in everyway but about $15 cheaper per leg. :) 

I built two of these headboards over Labor Day weekend for my girls.

After looking through the Handbuilt Home longingly many times, I took the plunge with this simple headboard. I've never built anything from wood, but my main hobby is sewing so I'm good at following directions. I followed the plans exactly and I love how this came out! I used a nailer and glue for all the construction. I recommend this project for beginners! I chose to paint my headboard black to blend with my other furniture.
Now I'm already onto my next project, with a Kreg Jig in hand, the modern craft table from Ana's book. Thank you, Ana for sharing your plans and inspiring people to try building! I feel my skills and confidence increasing with each project!

I'm a better plumber than a carpenter.

Easy to follow instructions.  Thanks!!

I ran across Anas website in search for the perfect table, My boyfriend and I just moved in together and have gotten kinda excited about making his home our home. I thought about building a table that would be big enough for the whole family (my children and his)I wanted it to be special and mean something to us as it would be our first peice of furniture together. I was searching the web and run across this website with the exactly what I was looking for, rustic, homey, used and special... I got home showed Steve and we went right to the store to buy supplies, He had this table build within 1 hour and I went to work with the finishing touches. WE BOTH LOVE IT!!! we since collected 6 old chairs (not matching of course) and I am in love with our dining area! Thanks Ana for this wonderful website you so graciously share with us! Now we are planning our bed. It will be a farm house bed ofcourse!!! Cannot wait! Pictures will follow!

My sixteen-year old son took this on as a summer project and built four bar stools. He did a great job! We lowered them by 4 inches from the plan specs to fit under the counter. He used a Miniwax Colonial Maple finish. This project took a lot of Kreg Jig screws and plugs - almost 100 of each. They are very comfortable and beautiful.

This is the first piece of furniture we've ever built and we are hooked.  We used a 2x12x6 for the top and 1.5x1.5 for all the support.  We just measured the height of our couch and away we went.  This table is so sturdy and fills a need in our home. My husband and I enjoyed spending the afternoon putting this together.  I did a color wash on the wood instead of stain.  We came in well over the price point, but that is due to where we live.