Community Brag Posts
Step stool
Love, love , love this step stool. It’s perfect and relatively easy to make.
Comments
Shirley Table
This is 2 different shirley console tables . I did both out of pine boards and golden oak stain. One I used wax on and the other poly.
Pub table
A full write up of this build, including photos & dimensions, is here: http://imgur.com/gallery/YyawW
The Kreg K5 pocket hole jig cost ~$130.
The stain & polyurethane cost ~$15 total.
The lag bolts + washers + nuts cost ~$10 total.
2) Varathane brand stain; color "Early American." Applied with a rag, not a brush.
3) Varathane brand Triple Thick Polyurethane; satin finish. Applied with a rag, not a brush. Polyurethane applied to the 2x6 table top surface boards only (i.e. I did not apply polyurethane to the table's skirt or to the table's legs).
4) Lightly sand the dried polyurethane by hand with 300 grit sand paper to obtain a smooth-to-the-touch surface finish.
Farmhouse Desk with Wormy Chestnut
I just completed my first build (#AnaWhiteFarmhouseDesk). It has a ton of mistakes, but they are my mistakes to learn from.
1. Measure twice cut once not measure once cuss twice.
2. Cutting 2x4s in half does not make a store bought 2x2. Which is really 1 1/2 x 1 1/2. Who determined that we would measure wood (used in carpentry which requires very precise measurements) and just round up? Awwe, they'll figure it out!
3. Steelwool & vinegar stain with a black tea conditioner provide a beautiful aged wood appearance, but when using different types of wood it is nearly impossible to match (maybe even store bought stains are like that, too.)
4. When your 95 yr old grandfather (how freakin' cool is it that I have a 95 yr old grandfather... With a planer no less) tells you to catch the "wormy Chestnut planks" on the other side (okay... I'm bragging about getting my hands on wormy Chestnut for my desk top) remember to bring you own PPE because at 95 he doesn't require ear protection and doesn't give a frog's fat a$# if sawdust shoots in your eyes & nose... What's the problem???? He never had a new pair of shoes until he was in the military serving in world war 2 so what's a little sawdust?
5. Sometimes you just need to ask for help from your trusty uncle! Thanks to my uncle Nathan (Lord do I love this man!) I finally, with his help, completed the build by assembling the desk top yesterday. I was so afraid of screwing up my gold desk top (aka wormy Chestnut)
6. Mistakes... Do not fear them, but rather embrace them because that is life's playground where learning happens.
7. Learn from others. Thank you Ana White, Woodworking for beginners members FB group and YouTube!
Desktop and shelf hardwoods were given a few layers of had rubbed poly.
Red Hen Home's Farmhouse Table and Bench
This is the third farmhouse table I built, although it is trifle smaller to fit in a smaller space. I think this one is just about 62” long. I also built a 48” bench to go along with this table, and I think they look so cute together!
Comments
Tue, 04/16/2013 - 08:59
I love this!
I love your farmhouse tables! Did you make any changes to the plans when you took away the stretchers? I really want to make a table like this soon!
Sun, 12/06/2015 - 06:09
I'd like to know this too, as
I'd like to know this too, as I'm not keen on having the bottle boards.
Simple Paver Coffee Table (patio)
Ana,
I was looking for a Mother's day project that I could build with my 14 year old son. When I saw your share on Pinterest, I figured this would be perfect. There were a limited number of pieces (in terms of sizes/lengths) and the construction was pretty basic.
We purchased our pavers at Lowe's and found that they only sold 11 7/8" pavers (after our build). However, the 1/4" reveal around the border of the pavers turned out to be a terrific little detail. You would think it was on purpose.
As always, keep up the great work and sharing.
WoodworkCity
Comments
Wed, 09/13/2017 - 07:12
Concrete Paver Outdoor Coffee Table
Hi Ana,
Could you please tell me if you sealed the pavers.
Thanks so much for all the inspiration you have given me!!! I am going thru a very difficult time and don't see it getting better anytime soon, you helped me find myself and my passion. When I feel like I can't take another day, I go to your webisite and find one of your projects. Building gets my mind off of everything and a little break in all the worring. I just can't thank you enough!
Thank you Ana, Susan
Farmhouse table
Adjust the height slightly. Easy to follow plans, quick project.
Comments
Fri, 05/28/2021 - 10:44
Beautiful finish!
Love the hardware and two tone finish! Thank you for sharing:)
Baseball bat headboard w/ farmhouse style footboard.
I found a baseball bat headboard that I wanted to make for my son...thankfully I found this website that has helped me so much. I BUILT every piece of furniture my in sons room, crazy!
I had a blast doing and have no plans on stopping.
Comments
In reply to More info by mrpaulperry
Sat, 01/18/2014 - 20:52
more info
There wasn't a plan for the headboard. I found a picture a few years back and knew I wanted to make it for my son. I can take measurements of everything and let you know but I got the bats then just did what looked best.
I searched high and low for bats in local stores and online. I ended up finding the best and cheapest online. I did my best to find old, used bats but couldn't find all the right sizes for what I wanted so I just got new bats.
Benchright Coffee Table
I used Douglas Fir instead of pine, which increased the cost but I love the warmth of the wood in this piece. The instructions were pretty easy to follow once I got going, and the longest part of it was the staining process. I love this piece and I'm ready to do another one!
Office Desk
Thank you Ana for all of your woodworking plans. I have made several now and this desk is my latest. I stuck with the plywood for the file cabinets and went with an ash top panel made from 8" wide boards in order to practice some jointing and planing. The stain is minwax honey finished with 7 coats of poly. Again, thank you.
Easy Frame and Panel Doors
Needed to outfit an antique center island with some doors because our cookware was constantly getting dirty and having to wash before using. Followed the panel, rile and stile plans and ended up with some pretty decent cabinet doors. I would say that this style of creating doors while may seem easier due to not needing many tools (circular saw and kreg pocket set is about all you need), is actually intermediate because the panels have to be cut EXACTLY right or you will have gaps in your door. I remedied this with the help of my old friend wood putty, but this limits the doors since they must be painted. If your big box home improvement store has a COMPETENT worker (sometimes those are hard to find) you just might get some panels cut well enough, although I myself know how 1/8's of an inch add up . If you do decide to get someone else to cut the panels bring your tape measure and verify the cuts are accurate. Anyway I have created doors both the traditional rile and stiles with inset panels and this way and this way is definitely quicker!
NOTE: I haven't installed any catches or handles thats why the door is slightly open.
Great Way to Spruce Up Your Kitchen!
-Martin
Comments
Rustic Modern Platform Bed
We loved this bed much! And others loved it so much that the people who purchased our home requested to keep the bed frame as well. I guess we'll be building it again. We used a vinegar/steel wool solution to oxidize the wood and then sealed it with a natural finish (rubio-monocoat 'cotton white'). Thank you for these plans!
octagon lazy susan
1st time working in walnut, 1st time using my miter saw for more than 90 degree cuts!
Comments
Handmade by Jungle Jim
Great plans, Ana. Very easy to build. A good project for someone like me who has no carpentry experience.
Media Cabinet
Modified the size to be 42" (w) x 16" (d) x 19" (h). Used radiator covering grate for door inserts and left shelves open for horizontal component storage.
Storage daybed with bookshelf
I made 3 cubbies underneath and left off the doors. I'm still looking for fabric bins to go under there. Instead of doing the bottome arm, I made a bookshelf so there would be more storage space in this little room. I love how it turned out.
Closet
This was originated from an Ana closet build. There were bypass closet doors that I am still converting to hinged doors. I added the drawers in the center to eliminate the need for a dresser in the room. Doors should be ready in a couple weeks. I’m converting the bypass door to hinged, which is a project in itself!
Comments
Firewood Shed using Round Posts and 2x4s
I used the basic design principles from Ana's site but decided to use 3.5x6.5 round fence posts (purchased at my local Tractor Supply Company) for a different look plus they are a little cheaper than 4x4 posts. I also used pressure treated 2x4s for some added strength and perhaps longer durability. I used Ana's cedar fence pickets idea for my roof (these pickets are used as walls on one of the other shed plans on this site). I didn't need a very robust roof as my firewood shed sits underneath the deck which provides a lot of protection from the rain. I attached the structure using 3 inch deck screws and the roof with 1.5 inch deck screws (nails would have been more than adequate for the roof but I had the screws on hand).
I did run into some problems due to my design changes. Most of my issues involved attempting to square up the round posts which are much closer in shape to a jagged stick than dimension lumber such as a 4x4 post. If I had to do it over again I would not have used the round posts. Constant tweaks and adjustments to the posts significantly delayed my build time and frustrated me at times. I was just barely able to wedge my woodshed in between the 2 deck posts which actually came in handy as I was able to secure the shed to the deck posts with 3 inch screws...making the shed very solid! The final issue I discovered after loading up my wood shed. The 2x4s at the bottom of the structure began to sag. I fixed this by using my floor jack to raise them up and placed 8 inch tall 4x4s underneath (2 in the front and 2 in the back).
Overall I'm happy with the way it turned out and I really love all the plans on this site...GREAT ideas!!
Love these chairs!
I needed some chairs for my firepit and I found these Ana White plans on Pinterest! They were not too hard to make and they look great!! The only problem I have now is what's my next project...cause now I have that "Creative Fever!"