Community Brag Posts

Geo Dresser

Submitted by Anonymous (not verified) on Sat, 11/04/2023 - 14:44

Bedroom dresser made from Ana White’s plans! Absolutely love it and it was easy to build!

Kristen Kobeszko

Double Farmhouse Beds with Trundle Bed

Submitted by Kirk on Mon, 05/21/2012 - 23:25

These were my first builds. I am so pleased with how it all turned out! My sister in law introduced me to Ana's page and I was off! We have twin, 5 year old girls with their own rooms. They both needed new furniture and I fell in love with the Farmhouse Bed Plans. I used a little of the Mom's Fancy Farmhouse Bed Plans and the Queen Farmhouse Bed Plans. I wanted to use our existing mattresses with box springs, so I put a cleat on the inside edge, running the length of the side rails. Another modification, being that I wanted to use mortised bed locks on the side rails to allow for quick connects to the head and foot boards. I used these from LV: http://www.leevalley.com/en/hardware/page.aspx?p=67916&cat=3,40842,4126… I routered them in using a guide. I strongly recommend them if you are able. You can paint the bed pieces independently and assemble very easily. No building in the room! The other modification I made was that I made the actual side rails higher in order to fashion a trundle bed underneath. The trundle is a double as well, rolls on stationary castors, and on carpet too. I have a single mattress in it and it can be pulled out on either side. One side is for the bed and the other can be used as storage etc. My girls can easily pull it out and put it back in place. Great for sleep overs and extra company! It is technically unattached from the bed, but there are small stationary castors that run the inside length of the head and foot boards on their sides to act as guides for the trundle. I have attached pictures to show what I mean. I did not want it banging around underneath, and the castors are great little guides. I have more detailed pictures, but am having difficulty including them as their file size is too large. Since making the beds, I have also made the farmhouse side tables, and am in the midst of making the Madison Dressers to match! It is all coming together nicely. It took me about 2 months to complete the beds, but that was a few hours here, and a few hours there. I didn't think that was too bad, as I made two of them and it was my first project! Either way, I am very excited and have the builders itch now! So many things to create. Thanks for a great site, and so many ideas.

Estimated Cost
$250 per double bed and double trundle
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
All pieces were primed and painted with an air spray gun, and the colour is Benjamin Moore "Cloud White". If you can do it, I suggest spraying. It makes the paint go a lot further than if you were to brush or roll it on!! Way more affordable.
Recommended Skill Level
Beginner

Comments

Abby K (not verified)

Wed, 07/11/2012 - 17:35

I absolutely LOVE these beds you made! This is *exactly* what I have been thinking about for my spare bedroom...a mix of the farmhouse bed, farmhouse storage bed, and mom's fancy farmhouse bed! I wanted to have the option of a trundle beneath our spare bed as we frequently have overnight guests that have children, but I thought the storage would be awesome, too! Your modifications are perfect!! I would love to know more and see more pictures...and pick your brain about all you changed/did with yours! Thank you so much fro sharing!

Kirk

Wed, 07/18/2012 - 12:22

Thank you for commenting. I am very proud of these, I still go and look at them! Haha! I do have more pictures, they were just too big to put in this post. There is a MB size limit. If you'd like me to send them, just leave me an email addy to send it to. I am afraid I will be of little help as far as the measurements go. It was a learning project, but in the end it went well. I can help, but I went by measurements from their existing mattresses and heights, and what I conjured from other plans from this wonderful site! If you do not have one, I strongly suggest getting a Kregg Jig. I did not have one for the beds, but now have one for the nightstands and Dressers. IT MAKES LIFE WAY BETTER!! It is an investment, but worthwhile! You will also need some clamps, but like I say, worth it! Happy building!

Farmhouse Doll Bed

Submitted by risingeden on Wed, 03/05/2014 - 22:39

My daughter and I built the farmhouse style doll bed and had a great time! The plans were wonderfully easy to understand and follow. It was a great experience to work together and learn some new skills. She even chose the paint color herself - pretty good taste for a 9 year old! Thank you so much for a great, inspiring website!!

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
We used valspar "posh red" interior paint. Love it!
Recommended Skill Level
Beginner

From Portugal, with minor modifications

Submitted by Anonymous (not verified) on Sun, 06/05/2016 - 10:48

Followed the plans, with minor modifications to adapt the size to the available wood. Bigger modifications are the use of bolts and nuts instead of screws (to allow easier disassembling for storing), and the underneath reinforcements to avoid the table to bend over time.

Thanks for the plans, the kids loved it!

Gonzalo, from Portugal

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Water-based pore filler, priming, exterior paint (mate)
Recommended Skill Level
Beginner

Helpful Helper

Submitted by JD_2030 on Thu, 03/26/2020 - 14:53

This was our first wood working project - boy, we were super excited to build this because our little one is Curious George and wants to see everything going on in the kitchen. 

The plans were modified very slightly to save some time and avoid major learning curves. We were very happy with the end result. We've since learnt that finishing a product is a whole new project - we ended up painting this helper. After the noticeable wear and tear, we realized we should have sealed it with poly.

PS: Pocket holes are everything.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Paint
Recommended Skill Level
Beginner

Modular Desk System

deskMy home office remodel was inspired by a post from Ana White a few years ago. For this project I ended up using IKEA bookshelves and cutting the tops off and flipping them upside down. I used some crown mounding to cover the base of the cabinets on the tops. The desk top bases are file cabinets I found at the office supply store and the desk tops are edge glue pine. Overall I think I only had to make 8 cuts for the entire project. Saving me a ton of time and money. Thank you Ana for all of the wonderful post!

Mark Danreiter on Facebook

Jigsaw Puzzle Table!

I was super inspired by the "iTable" which I am also going to build... but combined the idea with an idea I saw in a fancy home decorating magazine (a jigsaw puzzle stool).... took a lot of fiddling to come up with a 'universal puzzle piece' but in the end it worked out!

Built from Plan(s)
Estimated Cost
$150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Polyurethane stain, spray satin varnish
Recommended Skill Level
Intermediate

Comments

spiceylg

Fri, 05/25/2012 - 05:49

That is so cool! Beautiful job. Looks like those curves too lotsa patience, something I seriously lack. Thanx for sharing.

Sue_McL

Fri, 05/25/2012 - 09:09

Would love to have the template for the universal piece... I have to make one of these!!!

FANTASTIC job....

Mariah Papaya

Sat, 05/26/2012 - 06:29

Yes, it took ALOT of fiddling to get a universal puzzle piece template made up -- I was sorta copying one I found (google "Vector Puzzle") but had no way to blow it up so huge. Even after I cut them out, I ended up doing a lot of sanding to make the joints work, but it was fun! If you want, Sue, you could mail me an envelope and I'll trace one for ya!

Elise's Daybed

Submitted by GQuick0330 on Sun, 03/09/2014 - 22:07

We needed to convert our exercise room to a bedroom for our granddaughter visiting from England.

I added additional support inside the legs as I wasn't keen on supporting the rails simply with glue/ screws. This allowed the weight to transfer to the floor directly from the rails. Of course, it was all glued and screwed or nailed. Otherwise I followed the plans found here.

The fenial‎ treatments are antique "looking" door knobs from a national hobby store. To secure them to the uprights, I drilled a whole that was just under the width of threaded rod couplers which were the thread size for bolt from the knob. I tapped with a hammer so the coupler would wedge into and down the whole. The couplers were purchase from a hardware store.

Built from Plan(s)
Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Paint from Big Box store. Color names: Quart of White Primer, Quart of Bicycle Yellow, Quart of Bright White, and Sample size of Tutti Fruiti for the pink accent on the moulding feature.

The moulding I used was PVC composite, which I did not prime as I wanted it white anyway and any excess pink highlight would wipe easily. As I applied the pink accents, I had a damp cloth ready to wipe away any excess, drips or smudges on the moulding in areas I did not want. The paint comes off easily if wiped immediately.
Recommended Skill Level
Beginner

Sofa Storage Tables

Submitted by advanlente on Sat, 03/28/2020 - 11:44

Our living room has no closets or storage. As a family we love to play board games and we love to cuddle on the couch with blankets. So, I was trying to come up with a sofa table for our large couch that also had a ton of storage. I looked all over the internet and could not come up with a solution. So, I decided to try here on Ana White and I found plans for a bookshelf. I adjusted the height to be just below the back cushions and went for it. I am not going to lie, it was not easy for me to adjust these plans and I DID make several small mistakes, but I am so glad I made this. We use it daily and it makes life so much easier. The only add I will do in the future is to add stoppers so when you raise the lid, it doesn't fall on your head. It makes life interesting though at the Van Lente household lol 

Comments

GadgetGrrl

Tue, 02/09/2021 - 22:53

I love this idea! Just curious - did you keep the bottom shelf of the bookshelves, or did you leave that off since it's not accessible behind your sectional?

Loft bed for Wyatt

Submitted by Quartney on Thu, 06/20/2019 - 11:47

I did this project 99.97% alone (if you call "alone" with a 1-year old and 3-year old nearby). This was a challenging project that took longer than expected (one full week, working well into the night after the kids went to sleep). I used furring strips for the 1x3s and 1x4s. They cost about $2 less per board! Total cost of this project includes paint, screws, etc.

Estimated Cost
$240.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Zinsser BIN primer, followed by Sherwin Williams semi-gloss enamel paint
Recommended Skill Level
Intermediate

Comments

John Hopkins (not verified)

Mon, 10/22/2012 - 20:40

I have been looking for something similar to this but with a futon in the bottom. Anyone seen plans for such a critter?

Media Console

Submitted by KWTookey on Fri, 03/14/2014 - 14:37

My first furniture Build. My wife wanted rid of our old bookshelf turned TV console. I saw this online and went for it. Finished it with a serious splash of color. We love it so much we decided to go with teal as our primary livingroom accent color. Pretty proud of this little guy. Thanks for the great design!

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
2 coats of Behr Eggshell latex in "Lagoon"
Sanded down corners, edges,
Then Minwax "English Chestnut" for highlights.
Finished with 2 coats of Polycrylic topcoat.
Recommended Skill Level
Beginner

Comments

DIY Rustic Console

I had a friend make a request for a console table.  We came up with this design to fit her space and needs.  It was a pretty easy build.

Estimated Cost
$150-200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
ECOS Paints Woodshield - Pine Needles
ECOS Paints Woodshield - Satin Varnish
Recommended Skill Level
Beginner

DIY Walk-in Pantry Shelving

Submitted by Greystone1 on Sat, 11/18/2023 - 12:39

Built new shelving in our 6' x 6' pantry using red oak plywood shelving and 2" x 2" red oak corner shelf supports and red oak 1" x 2" trim. Used plans modified from Ana White site.

Pat Edwards, Ashland City, TN 

Built from Plan(s)

Comments

Little e's Garden Bench

Submitted by jaime19861 on Mon, 03/17/2014 - 09:28

I made this garden bench for my niece's 3rd Birthday. She loved it!

I was able to use wood that had been leftover from past projects. I only had to buy a few boards. The paint was largest expense.

The most difficult part was the arch. I did that by bending my ruler along some finishing nails.

Built from Plan(s)
Estimated Cost
$30
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I used DutchBoy MaxBond semi-gloss exterior paint.
Recommended Skill Level
Intermediate

Shelves for a Shed

Submitted by mtairymd on Sat, 06/18/2016 - 13:30

Build Instructions:
http://www.instructables.com/id/Shelves-for-a-Shed/

I looked at purchasing brackets but I couldn’t get the exact size and the price seemed high for something so simple – plus I had a few excess 2×4s from the last job. Mainly, I wanted to utilize the area in the upper portion of the shed while keeping the floor clear for yard/garden equipment. There are multiple variations of this style bracket online. I took a little different approach by utilizing the existing part of the shed (top plate) for support. I don’t know the load capacity but I’m quite sure it will handle any of the items (tarps, paint cans, etc.) I plan to place on the shelf.

Estimated Cost
$20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Beginner

Fancy X Desk For Home Music Studio

This is only my second ever furniture project. I modified the height to give me extra clearance for a full sized synthesizer underneath. I spray painted the base matte black, stained the top with Minwax Puritan Pine, and sealed it with Varathane Triple Thick Water Based Polyurethane.

I attached the top with heavy corner brackets and 1" hex head lag screws to add a bit of an industrial look.

Built from Plan(s)
Estimated Cost
$60
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Used a single coat of Minwax Puritan Pine for the top, and a single coat of black matte spray paint with primer for the base.
Recommended Skill Level
Beginner

Comments

My Rustic X-Side Kitchen Island

Submitted by cassiet717 on Sat, 03/22/2014 - 05:53

I’ve been hoarding my scraps for the past six months or so hoping to build this as soon as possible. I paid roughly $34 for it!
Everything but the 1”x8” drawer face and the project panel top came from my scrap pile. My aunt and uncle’s renovation dumpster provided the missing 2”x4”s. There are nail holes, dings, and some general bruising, but who says that’s a bad thing?
I omitted the piece of trim beneath the drawer to allow more room for storage on my shelf. I absolutely love my island, and as usual Ana's plans were flawless!
You can see details on how I built and finished on my blog here: http://lovelyweeds.blogspot.com/2014/02/island-paradise.htmlit
Thanks for taking a look!

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Olympia latex paint, Minwax Special Walnut stain, Minwax Finish Wax (body), Polyurethane (project panel top)
You can see tips for recreating my finish here: http://www.lovelyweeds.com/2014/03/island-paradise-part-2.html
Recommended Skill Level
Intermediate
Back