Community Brag Posts

I followed Anna's plans pretty closely though deviated somewhat as well. Added additional length and one more seat separators & seat, increased depth by a few inches, changed design of seperators to allow for arm rests, added some additional trim, a second inset shelf w/in the shoe box area (for sandals and whatnot), and then inset wainscoting.

Ana's little crates go perfect in our beach themed bathroom. I altered Ana's plans a little. I changed the dimensions to 12 x 11 1/4, and I did not use lath sticks for the crate slates because I wanted something sturdier. I had some left over 2×12 wood from a previous project, so I cut off 3/4 in wide pieces to make the crate slates. The wood grain gives character to the crates and makes it look more weathered.

Substituted 1 x 4s for the shelves instead of the slats. Used red oak for the top and treated it with butcher block oils and wax so that it can be used for chopping.

I built this on my own (no help!) in my apartment garage from February 2011 - April 2011. I'm a single mom, so I would work an hour here and there every week or so.
The large pieces had to be cut by HD employees,Small pieces were all cut individually with a hand-saw. The only power tool I own right now is a drill, so this took a while. lol

When my husband and I bought our home we knew we wanted to make changes. The fireplace was an eye sore to us, so we decided to change the whole thing. When we researched on the net on how to make a mantel, we didn't find that many how to's. We have had a lot of questions on how we did it, so wanted to share with others how we did ours. Once we figures out how we were going to build it, it didn't take much time to finish the project. My blog has more details on how we accomplished our mantel. http://supersaturdayldscrafts.blogspot.com/2013/06/fireplace-remodel.ht…

Although Ive done a lot of DIY projects this was my first real furniture build. I modified the plans for the Simple White Outdoor Sofa because my back cushions were quite short and I didn't need the back to be so high to support them. I also liked the idea of having some contrast to the painted finish so used some Sapele I had. I'm really happy with the end result.

I wanted it to be a little more substantial that the original plans and I wanted the arms to be arms to fully support a forearm (and a beer) so I used 3 x 3 for legs and a 4 x 2 ripped down to 3 x 2 for the arms. I also tapered the legs to soften the lines a bit and give it a bit more interest.

The armchair is made in the exact same way but I made the legs a little taller so that the arms were at a more comfortable height to rest both arms on while reading a book or newspaper.

Love the way this turned out!

After seeing the farmhouse bed with stenciled headboard, I knew I wanted something similar for my little one. Haven't decided what I want to do with the big empty space in the middle of the headboard yet, but I went ahead and built it. I also changed up some of the decorative pieces just because I wanted her to have a one-of-a-kind bed. The blocks in the corners have little flowers in the middle, the legs at the end have slightly larger flowers on them to mimic the flowers in the blocks. I only made one major mistake on this bed, and that's the height of the headboard. For some reason it looked sooooo tall, so I stupidly decided to cut a few inches off of the legs, and now it's too short. Still mulling over what to do to fix that, but overall I love this bed!! :D It's the second thing I've built, the first being a bench.
Proud note: I built this bed completely and entirely by myself. :) If I can do it, anyone can!

Recycle bin from Ana's Book. I mod poge glue on burlap to the top, placed on a piece of Plexiglas so I could wipe down, then stained the whole thing with an antique finish over the crackled paint. I also did an L molding around the Plexiglas to keep in place. Came out lovely! Added baskets for my veggies and done!

This project is a 4-drawer variation of the Easy Jewelry Box, made with select 1x6 for the top & bottom, craft boards for the box and drawer sides, with craft board overlay drawer faces. No plywood is visible on the outside on this build.

This version has a smaller footprint and is much lighter than the original plan, built using the thinner craft boards, and the drawers slide on S4S instead of full shelves. The drawers are 1/8" shorter than the box depth to ensure they don't touch the box back, so the overlay fronts lay flat to the box. The overhangs are ¾” wide mini colonial moulding, and the feet are squares of 1 1/8” lattice scrap. The design includes a toe-kick and top-kick which allows room for both overlay drawer faces and top/bottom overhang.

I spent a couple of hours redesigning the plan to get this as light as possible, while making the most of the usable space within the footprint, and leaving no plywood edges visible on the outside. The build itself took about 6 hours, including the build, sanding, finishing, and decorating.

My daughter wanted this for her first bed. I loved how it turned out to match her room!! The plans were super easy to follow. I am so grateful for the time and thought process that went into making these plans. Thank you so much!!

Simple open toy box with moulding detail.

We loved Ana's plans for the large pet kennel / end table combo but we needed a medium-sized one for our Welsh Terrier, Watson. I reduced all the dimensions, ending up with a kennel that's 18"(W) X 24:(H) X 28"(D), perfect for Watson.

To prevent Watson from using the rails as chew toys, I lined the inside of those areas with chicken wire. I also extended the table top an extra 3" to accommodate a swing-arm end table lamp (with the cord outside of the kennel, of course). We painted the kennel black to match our other end table.

This was my first time using the Kreg Jig (80+ times on this project!) and I love it!! In fact, I'm looking for more projects that require the Kreg just so I can play with it some more. :-)

Used the ideas from the kitchen island plan and coffee table plan to come up with a more elegant coffee table.

I made the legs from joined 2x6's cut down to 3x3. Mortised the rails in the legs for a really solid construction, and that way I could also eliminate any excess framing inside the table, and no screws. I was able to salvage all the wood for the legs and rails from a pile of scrap construction lumber.

Joined the top with fir strips between each 2x6 piece. The 2x6's and fir slats were purchased from a hardware store as I don't have a planer to clean up the surface of such wide boards...

I wanted to do something special for Christmas for my 4 year old daughter. I have no real experience so this was one big lesson. The site and the photos from others made it feel so doable... I got it done in time and we finally painted it. My daughter picked all the colors and we painted it together the last few cold weekend days. What a great experience. Thank you for making DIY  feel so doable... now I’m completely hooked and her twin brother told me he wants to build a chair with me.. but a big one ... uh oh.