Community Brag Posts

Love Ana’s 2x4 patio loveseat sofa sectional, it was easy to follow. I have made 3 sets for my close neighbors.

Built the table a year ago and never got the chance to post pictures!!

Here are some pictures. I ended up building an end table based on this model as well and can post pictures if some are interested.

Table is made of Western Red Cedar.
I made some tweaks because I could not find 2 x 12.
Also, I've distressed the wood a little bit on the top.

The finishing for the top was made with oil stain quickly washed over then wiped off. The dark stain went in all the cracks and holes made from the distressing technique. Then some lighter stain was used and oil varnish (at least 6-7 coats to make it really shiny).

Finishing for the bottom part is a mix of lighter and darker

all minWax oil products.

Overall approximate amount of work I'd say is about 24 hours.
The end table took less time: about 15-18 hours as I was getting comfortable. :-)

Took about 26 hours total, so a full weekend and couple of evenings painting!

I made a couple of changes - things are typically in cm/mm here in the UK, and couldn't find 1" planks anywhere (so used 18mm planks, and 44mm square timber). Also used 18mm MDF for the sides and back, as it was a bit expensive to use nice wood, and no point anyway if it's being painted.

Very pleased with the result, they look great.

Built for my daughter!

Wanted to build a new bed for my daughter and ran across the fancy one on here...I'm not too great at mimicking design shapes so I made my own. Stained with white country and a high gloss finish. I love it! Thanks Ana for making such easy to follow plans. It took me 3 days from start to finish. I use all rough cut lumber ran in a planer. Can't wait to build more!! I shrunk the plans down to fit a twin size mattress.

This is my first attempt at recycling old furniture. I'm pleased with how it turned out with the slight distressing on the corners.

These modern style shelves are easy to make and can be used for a myrid of things. We are using them primarily as DVD storage, but they will work for books, small toys, and other display items. 

My daughter likes movies and by likes, I mean she loves movies!! Her world, much like many other 4 year olds, revolves around Disney characters. At this point she is hung up on Toy Story, for the second time. When next week rolls around, who knows who or what it will be next.

My wife and I have been buying her Disney movies and all other various cartoon movies since she was first born. The problem with that is, you start to run out of places to store them after a while. Our dvd storage racks have been overflowing for the last couple years and we finally decided enough was enough. I had to build some more storage, preferably in her room this time. This would alleviate some room for us and put the movies where she could more easily access them. I knew I wanted something colorful and not too complicated, I was pretty happy with what we came up with. 

You can check out the rest of the article and the instruction here and get the plans here.

We built your farm table following your instructions for a table on our back deck. It was our first project and we had no clue what we were doing, but it turned out wonderfully! We have already received many compliments! Very excited to do the benches next!

took my time and followed the plans with the exception of modifying them for a king size bed. Turned out great! Thanks a lot.

My FIRST furniture making project ever! Previous woodworking project was a sorry-looking wall shelf made in high school shop class. The plans for this project were VERY easy to follow! Thank you, Ana!

Once I set up the sectional on our screened porch, I realized I really wanted a coffee table. So, I used the Accent Table for Simple Modern Outdoor Sectional plans as a guide. I lengthened the side and underneath supports to accommodate a longer top (46 1/2" for side supports and 45" for underneath supports) and made 13 top slats, instead of only 6 for accent table. Finished coffee table measures 48" length x 23 1/2"width x 17" height and used 7 boards, plus a scrap 17" piece leftover from sectional pieces.

Project Costs for 4 armless sections, 2 corner sections & coffee table (Maryland):

40 1x4"x8' common boards
2 boxes 2" dipped wood screws
1 box 1 1/4" dipped wood screws
bottle of wood glue
Quart of Kilz outdoor primer
Quart of Benjamin Moore "Ben" Low Lustre Exterior paint in Bittersweet Chocolate
Four Rolston 2-piece and Two Rolston 3-piece replacement outdoor cushions in Beige from Target (now discontinued). (Biggest chunk of cost, $520)

TOTAL = $~765

P.S. Find and buy the cushions first! It took me a long time to find them online. And when I went back to reorder more, after I decided to make sectional bigger than I originally planned, they had discontinued the corner sections. So, I just used a 2 piece cushion for one end. I actually like the way it looks (see pictures).
P.P.S. Our dog especially loves to sleep under the sectional...

I had fun doing this project, it was pretty simple.  One of the boards said wrong on the plans, but I like my finished project!

This was my second project (first was a work bench) and it came out great.

This is my first project and I really enjoyed making it. I just tripled the measurements for the bench.

This was our first attempt of any form of woodwork. The plans were easy to follow and after each step in the process of building this table, we became more confident in what we were doing. The great thing about this table was that with the exception of the wood used for the table top, we were able to scrounge around from various construction sites, the wood needed to complete the project. Most of the wood for this project was wood that was destined to a land fill so it was nice to salvage what materials we could to save our environment. Thanks Ana!

Some built-in bookshelves finished using milk paint. 

General Finishes 'Lamp Black' base coat + 'Driftwood' top coat, sanded down so 'Lamp Black' showes through. Yellow Ochre Glaze coat to add an aged look, then a quick coat of polycrylic for protection

Ready to grow my own vegetables.

Jeff DeVries

I finally completed all of the pieces for the Eco-Office Desk! Needless to say, I love it! Once I bought the Pure-Bond Plywood for the middle desk and desktop, I wish I'd spent the few extra dollars and used the same materials for the end cubbies. The wood in the Pure Bond is beautiful, and there is really no comparison to the other plywood. I *may* redo the end cubbies in the future, but for now I'm looking forward to using the space.
For the finish on the middle desk and desktop, I used the Satin Minwax Polycrylic, and it looks great. Couldn't be happier.