Community Brag Posts

This was my first project with doors! Everything worked perfectly, except there seems to be a small mistake on the cut list - the 4 1x3's for the doors should be 14", not 11" each. The picture is correct but the cut list should be revised. Otherwise, instructions were easy to follow. I used a metal grill pattern for the door insets - purchased from Lowes, cut with tin snips and spray painted matte black. This cabinet is a great storage space and an all-around great project. One extra small tip - it may be better to set the top piece back a 1/4 inch more so that it goes over the top edge of the plywood backing on the rear - it would make for a cleaner finish. Thanks Ana - this is my 4th project from your website and I hope to furnish an entire (tiny) house all by hand!

King bed made out of CVG hemlock with doug fir posts. Headboard chevrons are mix of oak, cherry, maple, hemlock.

Pug approved.

I didn't follow Ana's plans for this, I actually designed the closet system to correspond with my dimensions / wants / desires (see blog post), but this goes to show you that once you start building things, it's really hard to stop! I think in building brain now. I don't think in "how can I afford that" terms anymore, I think in "how can I make something similar, but BETTER?" Ana has helped us make our nursery for our first baby a labor of love!

I used these plans and modified the height to create functional countertop and shelving in my garage. I added a little face framing too. Thank you for the inspiration Ana!

Much to our dismay our tiny town is not host to any sweet antique shops. So when I began designing our new guest room, I knew that I was going to have to BUILD two bedside tables. Thanks to Anna, that is much more of a possibility for us than I ever might have imagined.

So, I decided on one bookcase and one vanity. For the bookcase I adapted the Parson's style bookshelf plans. But instead of going the modern route, I stained it ebony and painted over with a white satin paint--and of course distressed. Simple, affordable, and quite cute. You can see many more photos at www.thereadinggirl.com.

Well we just bought a new house and the bedroom was a bit smaller and lower ceilings for two beds. One daughter had a queen and my other daughter was begging for a new loft bed. Well I searched for plans on many different bunk beds and I came to the conclusion that creating one from two different plans would save the most space. So I made the platform bed and the loft bed separately and added dowels to attach them . The girls were ecstatic. It turned out beautifully!

I absolutely love this project. I do not have a pantry with a door so I just placed this spice rack on my wall and it really looks great! We have a ton of spices so I might need to make another!

Modifications to the simple outdoor table plan thanks to Finn’s dad. 

Thank you Anna for providing the template plans for this project. My wife had a mirror leaning on the wall in our bedroom that rarely got used and jewelry all over the dresser. So thanks to you I was able to turn this cheap mirror into useful storage and organize her jewelry.  Thanks! 

I designed this desk and created a building plan using Google Sketchup. It has 2 file drawers, 2 smaller drawers, 2 large adjustable shelves and a pullout shelf in the bottom, 4 small adjustable shelves on the top and a large space for a computer monitor. The large door drops open for a large work space. When you're done, put the door up and you have a beautiful piece of furniture!

I consider myself an advanced-beginner when it comes to building. I have just enough knowledge to get me by. If you have time, patience and the right tools you can build this too! It took me 10 days to build, working as much as my kids would allow.

It took me countless hours to perfect the building plan - probably just as much work to design it as it was to build it :)

I really scrounged around to build this desk. I used a large beam my friend cut up into 2x2's for the main posts/legs, pine furring strips for the side boards and around the top for moulding (lots of scraps I already had), 3/4" plywood for the inside dividers/panels & desktop, 1/2" plywood for the drawer boxes, drop-down door & top, 1/4" plywood for drawer bottoms & backing-board. I used 3/4" pine boards for the drawer faces and small doors on the bottom. I used drawer slides from an old dresser I found by our dumpster and vintage knobs I bought online. The other black hardware (hinges, pull handle, and clasps for door) I bought from a big box store and is categorized as gate hardware.

I built this for a friend of a friend. They had seen a similar hall tree on line that ran between $300-$500. It was made of a mix of materials, including mdf and veneer. It was for newlyweds so I did the finishing (something I really hate) and I made the cushion. I had the mirror cut at a local glass shop, and had it cut a bit shorter than how it appeared in the picture they gave me - I was afraid someone would toss somthing onto the cushion and it would end up hitting the mirror.
They seemed happy with it. I hope to get a picture of it in place so that I can add it to my album titled "Look what Gramma made when she could still do things".

I built this cabinet for a little additional bathroom storage.  I used select pine for most of the project and some old leftover hardwood flooring for the top.  The lines of the hardwood gave the cabinet top a nice rustic appearance.  I am happy how this project turned out.

I used Ana's plans for this project, but had to deviate since I built it for a friend who needed a table for 14!!  This thing is huge, 12 feet long, and about 44 inches wide.  I made it out of pine, 2x8s for the top but stuck to the plans for the frame.  It weighs about 200lbs or more, and had to move it with 4 guys...used an enclosed trailer to move it from my house to theirs. They love it so that's all that counts!  Oh ya, in the picture, you will see Ana's rustic X console table too!