Community Brag Posts
Den Console
Cool project! My wife liked it without the doors!
Cedar sectional
My sister needed new outdoor furniture for her deck and liked the look of the sectional. I used cedar with a clear varnish to creat this piece for her that was perfectly sized for her deck. The challenge to this one was getting it to her house about 3 hours from mine. Fully assembled it would have been tight getting it in my truck. I ended up cutting all of the boards and drilling all of the pocket holes in my shop and then assembling at her house. I have added backs to some of the pieces I have made fro others that want the extr support. I add a 1x4 laying flat across the back of the seat. The slats going up and down then have a slight angle to them which adds comfort and support. I attached the pieces to the 1x4 and the upper back rest piece in the plans.
Custom Potting Bench
![](/sites/default/files/potspin.jpeg)
Potting bench with a few modifications to fit our space.
Bill N
bench with drawers
![](/sites/default/files/3154814640_1346611025.jpg)
I saw hilarylouise do this and really loved it. It was taken from the cubby storage collection and it 3 bases with drawers put together. I also copied her painting the inside of the drawers different colors. I love that! It is super easy toy storage so not every room in my house looks like a playroom. I could use some practice sewing cushion covers though.
![](/sites/default/files/3154814641_1346611025.jpg)
Baby Teyla's barn bookshelf
![](/sites/default/files/3154847551_1404037161.jpg)
For our baby girl's cowgirl nursery, my husband and I wanted to build all the furniture. Only the crib and night stand to go.
We built the barn bookshelf for the fact that it was a perfect addition to any cowgirl room. It was a relatively simple build with the finishing taking the longest amount of time.
![](/sites/default/files/3154847553_1404037161.jpg)
![](/sites/default/files/3154847555_1404037161.jpg)
Comments
Sun, 06/29/2014 - 20:53
So creative and an amazing job!
What a beautiful bookshelf! I'm a couple weeks away from completing my 1 & 3 year olds' John Deere themed bedroom and have been looking for a shelf for their tractors. This is the perfect! Thank you for your awesome idea and good luck with the the rest of your nursery builds!
In reply to So creative and an amazing job! by Veronica P
Tue, 07/01/2014 - 17:42
Thanks
Thanks for the encouragement! We have enjoyed building but sometimes feel like we bit off more than we can chew with all the nursery and the closing deadline. :-) hearing positive feedback is encouraging.
Tue, 07/01/2014 - 19:06
I can relate!
I'm due in August with baby boy #3 and promised his big brothers a John Deere themed room including a tractor bunk bed, toy storage, closet and stepstool before the little guy arrives. What was I thinking? But I'm just a week or so away from completion. I'm sure you'll make it in time as well and if your finished pieces are any indication of what her nursery will be like, Teyla will be a lucky little girl!
Organizer
It's a little twist on Ana's Coat organizer. Turned out really useful and did not cost me anything since I ussed scrap wood. I wish I would build have built one for coats as well.
2x4 Truss Style Bench
![](/sites/default/files/IMG_1833.jpg)
Just modified the length of the 2x4 Truss Bench, to fit in the space.
![](/sites/default/files/IMG_1815.jpg)
![](/sites/default/files/IMG_1825.jpg)
DIY Outdoor Sectional
![](/sites/default/files/andreapin.jpeg)
I used the armless chair plan, and altered the one armed plans to make two chaises. Then I increased the size slightly to accommodate the 25x25 pillows I bought. This took about 12 hours with one person working. I am super proud of it! Finished today, and will eventually stain after the wood has dried out a little. Thank you, Ana, for making straightforward plans that gave me the confidence to do my first woodworking project!
Andrea in Michigan
Media Niche
I love our living room in our new house, but this media niche that was created for the 90's tube TVs has been an eyesore. Next we hope to finish out this niche with a fun finished background and floating shelves.
I built the cabinet on the left in a cabinet-making class at a my local woodworking shop. I altered the Classic Storage Wall dimensions to fill in the rest.
Things I would do again: I left a couple inches of the backboard open for easy plug hiding. My build was made much faster with the Kreg jig and a borrowed nail gun. I added a kick plate to match my original cabinet and give it more of a built-in feel.
Things I would change for next time: Instead of spray base and finish, I would use regular paint for better consistency. I'm not sure how much I saved using MDF, but I'd prefer a sturdier material for this heavy of a piece. I need to adjust my cabinet doors still. I still plan on adding shelves inside of the cabinet door sections.
Mini Farmhouse Table
![](/sites/default/files/3154847681_1404273567_0.jpg)
This was a starter project, it was easy and fun to make. I think I turned out great for a beginner wood worker.
![](/sites/default/files/3154847683_1404273567.jpg)
![](/sites/default/files/3154847685_1404273567.jpg)
![](/sites/default/files/3154847688_1404273567.jpg)
![](/sites/default/files/3154847687_1404273567.jpg)
Server with Wine Storage
![](/sites/default/files/IMG_20161004_103107.jpg)
We needed a server that would store our china and also display and store our wine. I looked online for months and finally found the perfect plan. This fits in well with our modern rustic dining room decor.
![](/sites/default/files/IMG_20161004_103204.jpg)
![](/sites/default/files/IMG_20161005_082935.jpg)
![](/sites/default/files/IMG_20161005_082947.jpg)
![](/sites/default/files/IMG_20161005_083002.jpg)
$50 on hardware
Heavy Duty Picnic Table Bench
My husband and I modified the plans just a bit for this Picnic Bench Table we found on your site. We love it!
Home DIY Indoor and Outdoor Projects
![](/sites/default/files/huspin.jpg)
I have my husband working hard . 💙💙💙
Valorie Torres Arantz
![](/sites/default/files/hus1pin.jpg)
![](/sites/default/files/hus2pin.jpg)
Wrap around bar - "J" shaped
"J" shaped wrap around bar
To build:
2 x 4s
1/2" plywood
#2 resaw 1 x 6" planks - sold in 16' increments
#2 resaw 1 x 4" planks
1 5/8" screws
2 1/2" screws
3" screws
Jacobian stain
lacquer
finishing nails
Needed:
Tons of time
Miter saw
3/8" driver
wrasp
hand planer
I actually built this in my living room when I lived in an apartment. I had very cool neighbors. It weighed about 300lbs when it was done.
![](/sites/default/files/3154814831_1346869651.jpg)
![](/sites/default/files/3154814832_1346869651.jpg)
![](/sites/default/files/3154814833_1346869651.jpg)
Farmhouse Table and Bench
This was our first furniture building project. It took us about 20 hours to complete and we couldn't be more happy with the results. We used 4x4's instead of 2x4's for the legs. We also changed the dimensions of the table so that it was the perfect size for our kitchen. After completing the table we decided to build a bench as well. It is the same plan as the table, just miniaturized. We used Minwax Jacobean stain on the table and then topped with a clear coat. It is a very heavy, sturdy table.
![](/sites/default/files/3154847797_1404447056.jpg)
![](/sites/default/files/3154847798_1404447056.jpg)
![](/sites/default/files/3154847799_1404447056.jpg)
![](/sites/default/files/3154847806_1404447056.jpg)
Minwax Fast-Drying Polyurethane in Satin - 3 coats applied with a soft brush, light sanding in-between each coat.
Simple, Cheap and Easy Console Table With Bottom Shelf
![](/sites/default/files/new.jpg)
3 - 1x3 boards, 6' length
3 - 1x2 boards, 6' length
![](http://i.imgur.com/XXo0afH.png)
A) 4 - 1x3 @ 29 1/2" (Fronts and Backs of the Legs)
![](http://i.imgur.com/JyZUya6.png)
Construct your legs by nailing through the 1x3 legs into the edge of the 1x2 legs with 1 1/4" finish nails and glue. The legs will be positioned with the 1x3s to the front, 1x2s to the side, as shown in the diagram.
![](http://i.imgur.com/MLiwX5O.png)
Start by marking each of the legs 5" from the bottom of the board. This will be the bottom of the side support, D. Nail D to the legs, using 1 1/4" nails and glue, from the inside.
![](http://i.imgur.com/ifA5CSq.png)
Now attach the bottom front and back aprons, F, alligning with the bottom side support D, Use glue and 1 1/4" nails, nailing through the apron F, into the legs.
![](http://i.imgur.com/ks7ARcV.png)
Attach Bottom shelf G to the bottom side supports D and bottom front and back aprons F. Use Glue and 1 1/4" nails, nailing through the shelf into the supports and aprons.
![](http://i.imgur.com/AkDeg4S.png)
Now use the 1 1/4" nails to nail through the Top side supports C into the legs. Use glue. Keep top edges perfectly flush.
![](http://i.imgur.com/X4T5eLg.png)
Do the same for the Top front and back apron pieces, E, as shown above. Nail through E into the legs using 1 1/4" nails and glue. Keep top edges flush. Take a minute to check for square
![](http://i.imgur.com/Crft24P.png)
Now add the base top, piece H. You should have a 1/4" overhang on the front and back edges, and 4 3/4" overhang on either side. Nail into the legs and the apron using 1 1/4" nails and glue.
![](http://i.imgur.com/NWNRgGd.png)
For the Bread Board ends cut a piece two pieces from the 1x10" board to 11 1/4" long. You then need to rip those pieces down to 5 1/2" wide. If you prefer you can purchase a short piece of 1x6" board instead but this reduces waste. Use glue and 1 1/4" nails from the underside to attach the breadboard ends to the base top. Keep all outside edges flush.
![](http://i.imgur.com/8bcDjzL.png)
I recommend not cutting the final piece, J, unitl you have taken an exact measurement. Add the final piece, using glue and 1 1/4" nails from the underside.
Farmhouse Side Tables
![](/sites/default/files/5F76AB12-E2D2-4EB1-B83B-3F0DD3AEF54C.jpeg)
Great looking tables . This is the Large size . If your using in your living room I’d recommend going with the “small” size which is more like a normal standard size. The large size is way to big for a normal average size living room.
About $70 to build a set .
Custom Coffee Table and Side Tables to Fit Sectional
![](/sites/default/files/cuts5pin.jpeg)
We looked for coffee table to fit our sectional, couldnt find a size that seemed right so wife tasked me to male one. Table turned out so good she requested end tables i followed an Anna White plane for basic coffee table but added the decorative top.
Marty Henderson
![](/sites/default/files/cuts4pin.jpeg)
![](/sites/default/files/cuts3pin.jpeg)
![](/sites/default/files/cuts2pin.jpeg)
![](/sites/default/files/cutspin.jpeg)
My Modern Farmhouse Table
![](/sites/default/files/3154814989_1347169792.jpg)
My husband and I built this project in one day, for less than $100, including the matching benches! We used inexpensive white wood boards and made sure to find the straightest ones in the best shape. The table is easy to assemble and SO sturdy. It can easily sit 4 adults on the benches or 6 smaller people, more with extra chairs on the ends.
I've wanted to build this table for quite some time and it couldn't have turned out better, I just wish we were keeping it for ourselves. :-)
I share more details on my blog if you'd like to check them out, thanks for looking!
Happy Building,
Danielle
organizationalhysteria.com
![](/sites/default/files/3154814993_1347169792.jpg)
![](/sites/default/files/3154814994_1347169792.jpg)
![](/sites/default/files/3154814992_1347169792.png)
Cedar Outdoor Dining Table and Benches
My wife and I loved the version that Finns-Dad made but we wanted it to be rectangular. The top is 1x6s around the edges with 1x4s in between. The frame is 1x4s. The bench tops are all 1x4s with 4x4 legs. There are 3/8 inch lag bolts in the legs. We did 4 coats of the urethane.
This was my first major project, and while there are many things that I would do differently if given the opportunity, we're still very pleased with it.
![](/sites/default/files/3154847960_1404739044.jpg)
![](/sites/default/files/3154847961_1404739044.jpg)
Comments
Thu, 01/01/2015 - 09:04
Really nice !
I really like the changes you made to this table, it looks really nice.