Farmhouse Bedside Table
![](/sites/default/files/20160827_185613.jpg)
Farmhouse Bedside Table for nursing room.
Farmhouse Bedside Table for nursing room.
My daughter and I made this for her new apartment. Used MDF with painted trim for the top and added a third leg so she could have a shelf. We used pallet wood for the shelf.
I made these based off the Brook laundry basket dresser plans. I did notice that the bottom rung placement measurement is about an inch off if you want your baskets spaced evenly, so I moved it an inch higher, which made them all very close.
The only other thing I changed about the plans was to add some decorative trim molding to the front edges where the raw plywood edge would have been. Plywood these days isn't of the best quality, so that rougher edge would have bothered me.
I primed by hand (it took six hours!!) and then decided to use spray paint for the top coat. It was a good decision-- the finish was much smoother than a brush, and it took less time to spray around the rungs than it did to brush them. It was also about half the price for the paint.
If I were to make these again, I would paint the insides before assembling the dressers. The painting part was by far the most difficult of the project. Painting while they aren't in a box formation would have been so much easier, and I could have touched any little spots up after assembly if needed.
More details can be found on my blog post: http://www.stitchfancy.com/2012/08/04/laundry-basket-dressers/
We had some unused space behind our front door and not enough room in the entryway closet. So we found a mud room plan and... voilà. We now have a place for backpacks, jackets, and shoes. We still need to put in the "T" into the bottom cubby for a shoe tree. We made sure to add 1/4 round trim to snug it seemlessly against the wall and 1/2 round for the face.
Wed, 05/28/2014 - 20:42
We didn't back with wainscoting; however, we taped it out with frogs tape and painted vertical stripes instead. The kids race to sit down and put on their shoes. Love it :)
Had to size the project done to fit my garage wall.
Left the sides open to use as storage for wood.
Overall Everything worked out, love it!
Small shelf for herbs or small flowers. About 12" wide and 7" high. The shelf itself is about 3,5" deep.
The small pots are from the local supermarket, and cost under 1 $ each.
Wood is from old pallets, and mahgoany stain.
We needed extra seating for friends to come over for football game days, so I took the outdoor chair plans and decided to use it for a den chair. Simple build, but I did add some 1x3 boards on the rails for more comfortable armrests. Add some appropriate color cushions and it's ready for football season! Quick assembly, but as usual, staining and clear-coating took the bulk of the time spent.
I wanted a tv/ fireplace for Christmas and my husband built this using your plans. I love it!
Joe Hall
So far we are in absolute love with this bed! It was a easy quick project that was fun to do. Made an adjustment so that we could fit the box spring in the frame. We also used the bed rail brackets from Rockler. http://www.rockler.com/product.cfm?page=11&site=ROCKLER
I got a miter saw for mother's day this year! This is the first project I made with it. We needed some accessible storage in the bathroom and this works out perfect
I loosely based them on the flat wall bookshelves and made them the right width to fit on the door. I used scrap wood and lathe that we had laying around to make both shelves.
I made this a little wider than the plans so that my kids could use it as an art and game table.
My first big project. I'm pretty proud of it. I followed the plans for Ana's 2x4 couch.
This project went pretty quick. I've learned how important it is to make super accurate cuts while making a carcass and inserts for it so I didn't have to "fix" as much along the way for this piece, yay for progress! The only amendment I made was adding drawer glides because this will be in my toddler's room so I didn't want the drawers to be able to come out all the way. I used mostly scrap wood I had that just needed to be ripped to the right size for all the framing pieces so all we actually had to buy was the 3/4" ply! And it cleaned up my scrap pile nicely too!
I built this off of the benchwright media console from PB and the benchmark media console plans and tweeted them slightly for my preferences
Built 2nd bookcase. This one for youngest granddaughter.
Mudbone1959
A couple of months ago I built a farmhouse table for our dining room. Now that we've moved into our house and have more space, I've put together the bench too. I used 2x6's for the top and 2x4's for the legs. When I put the legs on, it didn't feel sturdy enough so I added some 2x2 braces for support. I wasn't sure how they would look at first, but they really add a cool dimension to the bench.
This is our second time building the Rustic X Console Table. It is such a fun project! I have all the details and more pictures on my blog.
About 12 years ago we built the apothecary cabinet and painted it light blue/gray with a barn wood top. This year I decided to update it! It's now black with new hardware and feet added. I love the new look!