Community Brag Posts

Ana's benches are soo addictive - I had to try my hands at this one! It is meant for the porch on the new house to be built sometime next (?) year. I must say, I didn't quite manage to get accurate cut-outs with the jig saw, but the design is quite forgiving. The timber is Cypress Pine - an Australian native - sold as fence pickets in the convenient size of 65mmx20mm. I love the grain and variation in colors, ranging from chocolate to blond, and think it is totally underrated. The is top made from 5 planks, so a little wider than the original plans.

This project was desperately desired and needed! We had old wire shelving which previous owners of the home had installed improperly and were falling off the wall. This took about 6 weeks from start to finish, but I am SO happy with the results. Unfortunately, here in south Florida, our homes are built with metal studs which are more often than not spaced all over the place. So, attaching anything to a wall securely is next to impossible. I believe I've gotten things as securely attached as possible and things seem to be holding up really well. The icing on the cake was my mother-in-law purchasing 100 Huggable Hangers for me for my birthday! The OCD in me was ecstatic! Anyhow, thanks Ana for the great plans and helping bring custom organization to our homes!

Did these last year! 

Mike Dvorak

We loved the radiant air in our new early 20th century house, but as our daughter learned to crawl, we needed to prevent her little fingers from touching the two radiators that were still uncovered. After I finished my first few builds, I custom designed these radiator covers with 1x2s, 1x3s 2x2s and 1x12s. Needless to say, I got a ton of use out of my Kreg Jig. On the middle panel of the larger cover, I used a bit of decorative metal that they sell at the Big Box stores (of course, it would have been easier to use more of it, but I am a bit paranoid about little fingers touching a metal cover). For a final touch, I covered the top of the larger cover with decorative glass. For the smaller cover, I matched the distressed pink throughout the rest of my daughter's nursery.

My first attempt at building an Adirondack chair. Ana's plans were easy to follow and very accurate. I would classify myself as a Beginner+.. Recently suffered bad thumb cut making cedar planters. Always think safety first. 

I needed a new bed and stumbled upon your plan for a bed frame. I love it and had so much fun building it!
 

I was sick of all the books all over the front room. I needed to find something to store them on. Our kids had broken those cheap bookshelves from a big box store, so I need something sturdy. As you can tell by the pictures our youngest son loves to sit on it. I used the jig saw to cut the curves and it was super easy. I used a plate for the pattern on the curve. Great idea and plans!

We wanted to make a large sandbox for lots of kids. We love that it has an easy cover and two large benches to sit.

Supplies and Steps are shared at http://myhomedonemyway.blogspot.com/2013/07/building-6-x-8-sandbox.html

Built this for a friend of mine and his fiancé. They just bought a house and thought I would help them fill it. This is my 2nd farmhouse table. I really like the thickness of the table. 

Toddler Stool for my granddaughter! It had two levels.

I just finished my first project with a Kreg Jig, I used the colors from another kennel project that we found on the site because we thought it would go well with our living room. I adjusted the plans to fit our furniture and dogs, so it is shorter and not as deep as the the original plans show.

We really enjoyed building this playhouse swing set for our kids.  We have a decent slope to our backyard, so we needed to sink our posts, which required a bit more work thank Ana's plans.  We also used a real window (my dad just happened to have in his garage) instead of the 3 open aired windows Ana's plans called for.  Inside we built a fold under table, shelf, and a chalkboard for thier entertainment.  

I needed some extra storage space and have always wanted a storage bench in this corner of my dining room. It took me a week to build from start to finish. I’ve never done any woodworking before, so this plan was good for me, as it was easy to follow with the color coding. The only thing that was “off plan” were the X’s on the face of the bench. I had some leftover 1x1 trim, from a handyman project a few years back, that I was happy to use up. It fit perfectly and I had just enough for all X’s. My biggest challenge with this project were the lids. They have a very minor bow, so one of the corners isn’t flush. But, it’s not enough to bother me or need to re-do the lid. All-in-all, I’m super happy with this banquette and may have caught the woodworking bug!

This is a smaller version of the easiest chalkboard shelf. We needed a smaller shelf to fit between the garage door and coat closet so this was it. It was also my first time using my Kreg Jig, which I love. Such a simple little project but I am excited.

After seeing the plans for the Factory Cart Coffee Table on this site, I decided I should build one. I didn't actually follow the plans exactly...really just used them as "inspiration". I went with 5" swivel casters and 8" fixed casters, and the stain is Minwax hickory poly that has been sanded back a bit. I'm really happy with how it turned out.

Now on to the next project !

This was my 5th build. Took a few weekends working in the morning. Table is Weathered Oak (base) and Early American (top) stain. Modified the plans to make it slightly smaller so it would fit better in my kitchen. Very sturdy and table looks gorgeous in person, very happy.

8’ by 12’ shed with extra 15” of height. Thanks for the plans!