Texas Themed Bench
![](/sites/default/files/Porch%20Bench%201.jpg)
I modified this bench to incorporate a Texas theme. I traced a Texas shaped cutting board onto a 1x16 piece of edge-glued board, and then cut it out with my jigsaw.
![](/sites/default/files/Porch%20Bench%202.jpg)
I modified this bench to incorporate a Texas theme. I traced a Texas shaped cutting board onto a 1x16 piece of edge-glued board, and then cut it out with my jigsaw.
Modern twist on sweet pea bunk bed plans. We opted to close up the bottom instead of storage. Changed windows and railings on staircase. Took around 50 hrs for me and my husband who are beginner builders. Per recommendations we painted boards before assembling. I ended up Sanding when it was assembled to get a smoother finish. If you are particular about the finish like I am I would skip painting boards before assembled. Great plans thanks for sharing!
Doll Bunk bed, this was a lot of fun to make the plan was laid out well and very easy to follow.
This was a gift to a friend's 10 year old and it really made her happy.
I enjoyed sewing the bedding. It was just an over all load of fun.
I made it very quickly, I think the filling, sanding painting took longer.
This was a pretty straight forward design! I am so in love with my new planters. This was my second Ana White build. I can't wait to do more. The only changes I made to the plans were adjusting the side up so they were even with the legs. Then I added a 1X3 topper as some of the others have done. The crests that are attached my husband had made while in the Phillipines. I've been waiting for a special project to use them on and this was definitely it! Thanks Ana!!
The best part about having a child is you get the opportunity to be a kid again. So when we bought our house I told my wife I was going to build our daughter her very own tiny house. Since our daughter is only 3 years old and can't afford a mortgage of her own we had to settle for a condo in her bedroom. After watching episode after episode of tiny house living and getting inspired it was time to get to work. With some help from my little girl (and mommy) this is what we came up with. To be honest I have to admit my crowning achievement was the faucet I put together with some pipe fittings and 50 cent faucet handles I picked up at a salvage yard. I know, I know after building everything in and out of her tiny house it's the kitchen faucet I'm most proud of HA, HA, HA! . One of these days i'll learn to actually take good photo's but i'm sure you guys get the idea. I hope you guys like it and get inspired to be a little kid again like my wife and I got the opportunity to be.
Thu, 01/12/2017 - 05:32
What a fantastic idea to build a tiny "house" for your little girl. Love all the details!
draft
I made these two American Girl doll beds for my nieces. For one bed, I followed Ana's plans exactly. For the other, I used plywood and cove molding in place of the 1x3 slats.
You can find more details about the build and finish I used on my blog.
This was my first build so I learned a lot!!! I love this table but looking back I know more now than I did then and would have done things a little different. I would have plancked the top using my Kreg Jig Jr. and looked for straighter boards at Home Depot. I also altered the design for the look that I wanted, a rustic one. The table is 44" square and stand 43.5" tall. I also mitered the corners of the top outside boards wanting to give it a more finished looked. It took me about 3 days of nap times to build. We use it almost every night to eat dinner. I found the chairs at Habitat for Humanity and have plans to build a few more. My Husband thinks I should paint the table and distress to match the chairs, but that has not happened yet. All together I had a great time and learned a ton.
Fri, 10/10/2014 - 19:13
I love the smaller version of the table! Awesome!!!!
This was my first chair. I made the arms and base with 2x4's. I added a 2x4 apron in the front and back and 1x4 apron to the sides. My next chair I will try to use the Kreg for the arms, the base will be hidden with aprons, so it doesn't matter. The slates are 1x4 as the instructions provided recommended. I got the cushion from Lowes for $50
Farmhouse bed for my daughter, Thank you Ana for sharing planes .
I tried to make it exactly as your plane.
Our daughter was in desperate need of storage in her room, so we decided to build her a storage bed. This was our first build, and we had many issues that we've chalked up to "learning curve," but we're pleased with the end result anyway.
We used the Twin Storage Bed plans to start, but we modified the end box so that the sides would have all open storage, and we could build a low footboard. We liked the low footboard on the Farmhouse Bed, but our daughter did not want the crown on the footboard, so we worked up a simpler design. We kept the 3-box design of the Twin Storage Bed instead of just making the two side boxes longer so that the end box has deep storage (we kept the center divider for support, but the storage is 19" deep). The footboard is low enough that it doesn't extend over the mattress (our daughter's request), but it still gives the bed a finished look and keeps the mattress from sliding off.
When we built the two side boxes and the end box, we made the mistake of cutting all of the pieces at once, before assembly. When we went to assemble, we discovered that many of the boards had issues (warps, the boards were not the same width all the way through, our cuts weren't straight -- we had trouble figuring out how to get straight cuts with the circular saw at first). We didn't have money to buy all new wood and start over, so we went ahead and assembled the boxes, and I spent two weekends fixing as best I could (lots of filler and sanding). The boxes ended up being somewhat different heights, so even though each box was level on its own, we were going to have a problem getting them all the same height together. So, we decided to add feet with leveling footers. We also ordered a set of bowed slats from Ikea to help make sure the bed would be level and comfortable.
The storage cubbies all turned out the right size on the inside despite our assembly troubles, so we can fit 12 fabric storage cubes in the cubbies.
We added trim to the side boxes to give it a finished look and to help keep the mattress from sliding off the bed. To make it possible to move the bed later, we decided to build the trim on the side boxes and slide the end box into place. We attached the boxes together using L brackets.
The footboard is made out of plywood, trimmed with 1X6 at the top, 1X3 on the bottom trim, and and 1X2 vertical trim.
The side trim is made out of 1X4 for the top trim centered (2" overhang below and 2" raised above the side of the box), 1X3 horizontal trim for the bottom of the box (top edge of the bottom trim is flush with the bottom of the cubbies), and 1X2 trim for the vertical pieces.
The headboard was our own creation. Our daughter did not want a large headboard, so we wanted to make something that was just enough to keep her pillows from sliding off the bed and to provide a ledge to put her glasses and book. When we first tried the mattress on the bed, there was a 5" gap between the head of the mattress and the wall, so we built a headboard "box" that sits on and is attached to the two side boxes. The mattress now fits without gaps so that the pillows won't slip off the head of the bed.
I made a mini version of the Haley Simple Shelves as my first project from this site. I had only practiced with the Kreg Jig before making this, and learned that you should not make any project too small, or your Kreg holes won't fit.. Hence I had to face screw the shelf onto the frame. Nevertheless this was fun to make, I love the color (Peacock by Behr) and best of all, it gets stuff off the bathroom counter!
Sun, 10/05/2014 - 17:53
Hi!
No.. I did use pocket holes and screws to attach the rear support (1x2) to the arched sides, but couldn't use pocket holes to attach the top to the back, hence face screwing the top on. Kreg screws are very strong without the pockets too.
This is the second thing i have ever built and I am SO excited with the result! This has inspired me to take on new ambitious woodworking projects. Love it, thanks for the free plans!
I tried to post photos of my progression of work, but couldn't get them to post. The instructions to build this were simple and easy to follow. I was able to construct this by myself in about 4 hours total. I am getting ready to make a 2nd for my craft shed. Thank you for sharing this!
A few years back, I built a twin version of Ana's Farmhouse Storage Bed for my step-daughter. After she moved out, I converted it to a huge toychest for my three-year-old.
I would have left it as a bed, but with a quality mattress it was so high I was afraid he could get hurt if he fell out.
The conversion is simple. Remove 24 screws, reconfigure, add back the screws in different places. The support blocks become feet for the chest, and the slats become spacers under the top part.
He loves being able to get his toys out himself, and I love that he can put them away by himself. A big upgrade over plastic storage boxes on high clost shelves!
Once he's a bit older, I'll probably turn it into a bad again.
My first woodworking project ever. Used spruce dimensional lumber from the hardware store, some Minwax Red Oak Stain and Minwax Satin Polyurethane to finish.
Awesome learning experience, and looking forward to my next project.
This was my second project that I completed to go along with the Daybed With Three Trundle Drawers For Storage that I made for my son.
The original plans for this bed state that you need three 1 x 12 x 8's, but you actually need 4. The two middle 42 3/4" boards on the inside are missing from the cut list, but you can see them in the diagram.
I am so happy with the way this turned out! It was a little more challenging with the wider width boards--I had to force them on the line because they weren't perfectly straight. But overall, I am very happy with this.
When I drilled the holes for the shelf pins using the Kreg shelf pin jig, I used the 1" inset on the outside 2 columns, and the 2" inset on the center column. This way I avoided have holes that were drilled all the way through the board.
Between this and the storage daybed, I have really freed up so much space in my son's small bedroom! Happy building!
Tue, 01/01/2013 - 18:13
Your first two projects are very professionally done. KUDOS for such a great job. Keep it up and your kids will soon be in the shop with you and it will become a family affair.
I used three 2x12s for the top and 4x4s for the legs. Everything else pretty much the same. Final table size 36"x60". Longest/hardest part was sanding and staining
made from poplar and pine. Painted with a coat of black paint then painted with 3 coats of valspar furniture paint in white. I then sanded all the edges to bring the black thru. The hardware is made from a metal bar and wheels made with pulleys from home depot. I even weaved the baskets myself!
Just kidding about that last part.
Mon, 01/23/2017 - 20:47
You had me on the baskets lol! Great job, this is a beautiful piece!
I am new to woodworking and saw your plans for this Christmas tree shelf and I had to try it! I made a few with ash and maple wood, but then I came across some barn wood and loved how much it resembled natural tree bark. I decided that it would look even better with snow accents. I thought you would enjoy seeing a twist on the original plans.
Sun, 10/11/2020 - 17:51
I uploaded these pics and I have no idea why they are sideways?!
My husband and I built this counter height with specs of 351/2" high x 25" wide x 48" long. We are using it in our kitchen as a prep island.
Tue, 01/01/2013 - 05:09
I think you guys did a wonderful job on the kitchen island. I like the fat legs and the 1x4 aprons. Did you consider adding a drawer since you have deep aprons? Is the top a butcher block or did you construct the top yourself? If you did build the top is it suitable for use as a cutting board?
Comments
Princess Lynda
Wed, 01/11/2017 - 08:21
Woven Back Bench
This is AWESOME!!!! We Texans are so proud of our state! :-)