Community Brag Posts

This is the second project I've completed and I'm very proud of it. The design was changed just by adding four legs instead of three. It took me awhile to get the color even. Sanding between coats of the clear coat semi-gloss finish would leave white marks/residue that was difficult to clean away. I would have to restain those sections with a swift wipe on/wipe off action. This made the color deeper but also richer. During the summer months, the bench will be outside but will serve as indoor seating in the winter.

Rustic X end table

The original plans make a pretty big coffee table (52" wide).  I made this one (32") with the left over pieces of 2x6 from the bigger one. It was fun to make and is great for someone with a smaller living room

I've recently started woodworking and have gathered a few tool out in my little shed (10x12) and started playing around. After finding this site and browsing the plans I came across this one and decided I'd give it a try. The leg lengths were a little shorter than what I had expected so I added casters to each leg to raise the height a little and to give it mobility. It took me longer to complete since I was doing it in my spare time and had to figure out a few things. I bought the Kreg pocket hole kit and had to play around a while with it. I also had to practice my staining since I hadn't done that before either. Also, if possible- I'd recommend finishing the slats before putting them on.. they're a pain to try and paint after assembled. Any questions or comments email [email protected] **update 4/26/12 - 2nd picture is where the island sat since I made it- finally had to say goodbye since my house is tiny-- Quick $125. First day it was posted on CL I had 5 responses- within a week and a half it was gone**

I was looking for inspiration for the grandchildren when
I came across the full size version. I have now made 3 of the 1\3 sized as pictured, in different colours. It takes longer to paint them than make them.

First table I've built. The Rustic X Console Table was fun and fairly simple. A little complicated since we live in Hawaii and decent cheap wood is difficult to come by. Makes my entrance way very inviting. 

Needed to get the girls Dresses out of the nursery, this will work.

The daybed took about 4 weekends, and started with a lot of trial-and-error. Around the 3rd weekend, and a lot of "redo-ing", it started taking shape! This daybed will go on our screen porch, along with the homemade outdoor pillows and mattress cover. This project was definitely frustrating at times, but has been well worth the effort.

I made this desk for my wife's office space.  The plans for this desk are great and easy to follow.  The only change I made was I shortened the size of the desk top to fit in our space.

This is one of my favorite puzzles so far. You are given 8 blocks that must be placed in a box. They will fit and the box will be "totally filled." Once you are done, slide the lid on the top to complete the puzzle. Your test subjects might feel pretty smart by knowing that they solved this puzzle within a few minutes. However, you have a surprise. Pull the extra piece from the lid and tell them to place it in the box. I've tested this puzzle with 20 people so far and the common response is "No Way!". But yep, it can be done.

This video shows the solution but doesn't answer the why. Do you see a difference?

https://youtu.be/D8V0wRFAoz8

This was a very simple build, but to do it again I would attach the arms to the arm supports at a 90* angle before attaching them to the chair itself. My kids love this style of chair and are thrilled to have their own nice loungers out in the yard!

This was the first project my husband and I attempted. I'm new to building but he has lots of experience. Went real well, I should have taken the advice though to measure and cut trim at the end. I did it at the start to get it sanded and we ended up needing to redo it all with new wood. So happy with the end result though, tons of storage for baby's toys.

My wife was dying to have me build her a halltree for the entryway in out house. She drew up some "blueprints" and we started building together. I know the finished project is dark but from the before pic you can visualize it.

I'm sorry for not having the plans up. I will get her "blueprint" scanned for everyone to use as this was our design.

A lot of fun to try.  X’s were challenging, and used the pickled white washed stain for the first time.

Wanted a Patio table and when I saw the plans on this site I really liked it; I just changed the plan a bit. Everything was screwed from the underside of the table, also I attached the legs with 2" lag screws.

This was my first project! I love how it came out. Now my husband want the matching end tables. Can't wait to get started

This was an easy build and it's a very sturdy design. I've had many requests for converting this into a media center. 

Loved how rad this table turned out. I wanted a mad beefcake table top -- so I chose 2x12s for a more industrial look. To get perfect seams and a completely flat surace for the table top, I planed each 2x12 multiple times, followed by many sessions in a jointer to get my edges to a beautiful 90 degrees. Once I had the top measured out to the length and width I wanted, I ripped the pieces down closer to a 2x10. Following that, I domino joined the pieces with a crap-ton of glue and clamped it for 2 days. To finish, I created an original 5-step stain process (including white wash) to get a weathered, Restoration Hardware-inspired final look. So stoked on it! (Wifey loves it too, so that's a huge win). 

-Andy 

This was my first project and it was perfect for our small kitchen.