Community Brag Posts

Cyndi Console Table

Submitted by handydaddy on Sun, 09/23/2012 - 18:41

Here is my version of the Cyndi Console Table. Made from poplar with oak backing. Took me about a week working on it in the evenings.

Estimated Cost
$150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Stained with a custom Sherwin Williams stain and a minwax poly on top.
Recommended Skill Level
Advanced

Comments

Rustic X Kitchen Island -modified

Submitted by MaryMurray on Sun, 07/20/2014 - 10:24

I made this rolling kitchen island out of pine using plans found on Ana White's website. For the top I wanted to do something different. I found a tub of wooden blocks in the storeroom; they belonged to my husband's grandfather.

The blocks were made out of all different kinds of wood. I used a plywood base and simply glued them on then added a pine edge. I love the way it looks!

The back is open halfway so that when it is pulled out it can be used as a desk or small table.

The stool is from Ana White as well.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Special walnut
Recommended Skill Level
Intermediate

Modified scrap lap desk and chair

Submitted by Sb1212 on Fri, 10/28/2016 - 10:21

I wanted to build a desk for my son that had a compartment for storing his things. I also wanted it to have a place for him to pin his drawings up so I added a corkboard. I modified Ana's scrap lap desk plans and this is what I came up with. I also built him a matching chair. I think it turned out great!! 

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

2x4 Modern Adirondack Chair ❤

I LOVE this project!!!! Great directions! Amazing results. It makes a very comfortable, and sturdy chair. So far, I have made two. Three more to go. 😄

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
the first one, I painted and used an aging process on the seat. Then sealed with outdoor poly. The second one still needs finished. Not sure what color to make it.
Recommended Skill Level
Intermediate

8' Chaise Lounge

Submitted by Anonymous (not verified) on Sat, 06/15/2024 - 13:19

The 8’ chaise lounge… my first furniture build. Such a great plan to follow Ana! And since I need space for yoga I made a triangle brace to hang it on.

Laurie H

Danielle's Tab-top Curtains

Submitted by zigmommy on Tue, 09/25/2012 - 22:24

I just swooned when Ana posted her Tab-top curtain tutorial! I decided right then and there I'd be tackling all of the window treatment-less windows in my new home using her instructions. I'm no whiz on the sewing machine but I couldn't be happier with the way my curtains turned out!! No joke, if I can do this, so can you!!

I made the green shelf in my living room all by myself a couple years ago from Ana's Painter's Ladder Shelf plans. :-) It used to be red but I refinished it to match the decorating scheme in my new house. I love how everywhere you look in my home you see some piece of furniture or project that came about as a direct result of finding and embracing Ana's DIY spirit!! My curtains are no exception. :-)

I've made the curtains for my living room and my bedroom, and I just started the set for my boys' bedroom tonight. I've gotten better with each set, and this third time around I'm pretty confident in what I'm doing. Lucky for my kids, they're going to get the best set, lol!

I'd already been agonizing over what to do for curtains in my bedroom and I fell instantly in love with the fabric Ana used for hers. I already had bedroom linens that would match perfectly so I went ahead and snagged a few yards. All three of the fabrics I've used have been in the Waverly Home Decor line. The patterns are fun and modern, the price is right, the quality is great and I've always been able to find the perfect design. I usually buy from Fabric.com as it tends to be cheaper once you search for readily available online coupons.

I've really enjoyed making my window treatments! I get to have exactly what I want, in a better quality for a better price than I would ever be able to find in a store. It takes me about a day to finish a set (or at least the first two did) and I have relished the excuse to watch girly movies or listen to music while I get these babies sewn. I've had my first two sets done for 4 & 6 months respectively and they still bring me such joy every day.....give it a try, you wont regret it!!

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

marypoynter

Thu, 10/17/2013 - 01:14

Its better to have a window blinds than curtains when your window is made of glass but anyway its a nice bedroom of Danielle.

Fancy X Farmhouse Table

Submitted by disneynut on Tue, 07/22/2014 - 11:04

This was not my first build, but it was the first time I have done miter cuts. It was an easy to follow plan. The hardest part was trying to decide on the stain color! I am thrilled with the way it turned out. This table will easily seat 10 people which will be perfect for parties and dinners.

Built from Plan(s)
Estimated Cost
About $100 (including wood, sandpaper, stain, poly)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Jacobean and Helmsman Spar in satin finish
Recommended Skill Level
Beginner

rustic x desk

Submitted by Anonymous (not verified) on Thu, 07/23/2020 - 12:28

I liked this project and the desk turned out very well. I am substituting 5/4 lumber for 2/6 as they make a really nice top.

Laundry Room Storage and Organization

Submitted by Anonymous (not verified) on Thu, 06/20/2024 - 10:33

When looking for ideas/plans for designing my mudroom I came across Ana’s plans for the bench with drawers. I’ve NEVER built anything like it, or cabinetry, or anything like that type of stuff, but with her videos and plans I was able to design my own layout and make it all completely by hand and by myself. I’m in love with how it turned out!! Her designs/plans are so easy to follow and customize!! I can’t wait to do more in my house.

Mikishea Mauss on Facebook

Built from Plan(s)

DIY Upholstered Bed

This is my first big build. I did make a small twin sized headboard a few years ago. But this time we built the entire bed frame along with the headboard. It took a loooong time but was totally worth it!

Estimated Cost
$350 - $400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
fabric + batting + foam:)
Recommended Skill Level
Beginner

Comments

Rustic farmhouse table

Submitted by AustinM on Thu, 07/24/2014 - 19:03

I built the Rustic Farmhouse table and I only had to make minor changes because I got the wood rough cut milled in my neighbor's backyard. I built the bench with the left over pieces without any plans, just tried to make it match the table. We love it and it is definitely a step up from what we had before! I just have to browse your chair plans now because these chairs in the picture are from our old table.

Estimated Cost
$95
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Used a standard red stain and varnish on the table top/bench top and a semi gloss in the legs/skirting.
Recommended Skill Level
Intermediate

Comments

LSU Builder

Wed, 08/13/2014 - 13:07

Are you willing to divulge your exact paint color and stain? Is it white? Looks kind of bluish. Love the contrast. Great job.

Rustic X Sofa Table

Submitted by Anonymous (not verified) on Thu, 11/03/2016 - 23:07

Slightly Modified from the Console table plan, but 2 toned Rustic X Console or Sofa Table with colored distressed finish

Built from Plan(s)
Estimated Cost
$60
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Beginner Farm Table and benches

Submitted by Anonymous (not verified) on Sat, 07/25/2020 - 21:02

We built a larger version of the farmhouse table. It’s always been a dream to have a massive table for family dinners. I loved the look of the table and have wanted to attempt it for a couple of years. I finally got the courage up. We kept the legs the same size and just used 10 ft 2x6 and stretchers. It’s extremely solid and heavy! We are exhausted, it took all day! But we are so proud of ourselves. It’s definitely not perfect but it was our first and we love it!

Estimated Cost
150
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Weathered burn effect stain For the legs and runners and an antique white for the top.
Recommended Skill Level
Starter Project

X Console Table

Submitted by MichelleC on Thu, 10/04/2012 - 13:53

I built this a couple feet shorter than in the plans because it is for my neighbor's fish tank! It was fun to build and I'm in love with the finished product. She's going to paint or stain it herself. The pics were taken in my messy, projects-everywhere carport right before the neighbor hauled it off! Her son-in-law wants one now, and I will be building one for MYSELF right away as well! Thank you Ana!!!

Built from Plan(s)
Estimated Cost
75
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Intermediate

Comments

Rocking moses basket stand

This is the third project I've built from Ana's blog, and my husband and I just LOVE it!!It was very easy to build, even six-months pregnant. I lucked out in that I had everything I needed for this project on hand with the exception of one 1x3 (and the basket, of course), making it a super affordable and much nicer-looking alternative to purchasing a portable bassinet.
I used pine for this build. The only modification I made to Ana's original plan were the rockers. I couldn't find the pattern for her rockers, so I took a rocking chair we had, laid it on it's side and traced its rockers onto a large piece of craft paper. I just used the sander to round off the corners on the top so that the legs would be easy to attach.
I built this in an evening and my husband was able to stain it that night as well. (He's not great with stain, so I had to clean it up a bit after this picture was taken and before the poly was put on.) Had I started earlier in the day, this would have easily been a one-day project including our trip to the store for the 1x3.

Estimated Cost
$7 (Plus $30 for the basket)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax stain in kona
Recommended Skill Level
Intermediate

Our Beautiful Wall Tree

Submitted by Anonymous (not verified) on Mon, 11/07/2016 - 16:29

My husband and I did this as a weekend project. We had been looking for a bench like this for quite some time but they were either cheaply made or way too expensive. My husband went through the plans and decided he could do it. We added a shelf to it and also made it larger to fit the area we were putting it in. The great thing about the plans is that you are able to easily modify them to create what you are looking for.

Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
We did a mix of 1:1 stains that we had on had then used a satin clear finish.
Recommended Skill Level
Intermediate

Live-Edge Cedar Chair

This chair came together beautifully and is really an impressive piece. I managed to finish it in about 8 hours start to finish. I used the "original plans" that are linked in the description in order to avoid pocket holes (which are out of my skill range for now). In step 2, there is an option to place the back support on the inside of the legs instead of the outside for lesser of an incline. I followed this and would strongly recommend it. The chair is sturdy, wide, and comfortable even without a cushion. Thank you for the detailed plans!

Built from Plan(s)
Estimated Cost
<$5 - cedar is off-cuts from a mill
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
None yet
Recommended Skill Level
Beginner
Back