A Frame Chicken Coop
I built this chicken coop a few years ago for my cousin. I was happy with the plans, and the ease of the build, and she was happy at how easy it was to move. **This picture does not show the wheels installed.
I built this chicken coop a few years ago for my cousin. I was happy with the plans, and the ease of the build, and she was happy at how easy it was to move. **This picture does not show the wheels installed.
Our grandson needed a tv stand for his new apartment. They liked the plan from your website and this is our version.
Steve Mawhorter
Sat, 11/18/2023 - 13:31
Love your finish choice, it looks amazing! Thanks for sharing.
I used two towels to make the sling portion of the chair, instead of outdoor/decor weight fabric. Even though the towels were thick, I did not need to change the dimensions of the dowels or slits in the wood that hold the dowels.
Thu, 05/31/2012 - 16:59
What a great idea to use towels. I have a few extra beach towels that would be great for this.
Thanks!
Base was easy to do, drawers were another story! very big drawers, plan a lot of time for these.
Fri, 10/10/2014 - 18:33
My daughter said that's AWESOME! :) I think it looks fantastic!!!
We converted our mud (junk) room into our daughter's playroom. The room is awkward (5' X 12'), but I knew I wanted a reading loft by the window. The area we were working with was 63" wide and 23" deep. I wanted the loft to come right up to the window which is exactly 5'. This is obviously not a standard bed size so we couldn't just buy something. I came across your site (love it!) and found the loft bed plan. I reconfigured the loft using our measurements and my husband is the one who actually built it. It turned out so well! I still have some pillows to make, but my daughter and her friends have already been spending a ton of time up there!
I am happy with how this turned out, but I did run into a couple of problems while building this. First of all there is a typo in the cut list. It says to cut the drawer sides 23 and a quarter inches, but they need to be 21 and 3/4 inches. I built the drawer to deep and then had to take it apart and cut the sides down. Then the drawer was ever so slightly too wide to fit under the table after I put the L-brackets on (which are definitely needed to make the table sturdy enough.) So I had to make a little room under the table by taking the sides back off and adding a little piece of wood as a spacer on either side.
Also I decided to use poplar for the top just to make it a little more dent resistant because poplar is a hard wood. But after I started staining it I learned that poplar acts like a soft wood and can be very blotchy when stained. I had to keep going darker with the stain to try and make it even. It came out okay in the end.
I started off with Ana's plans and kinda went rogue from there. The idea of creating those curved back legs scared me so I thought I'd sacrifice an Ikea dining chair and use it as the legs. When I ruined one of the legs I decided that I'd come too far to back out and that I must continue. I adapted many conventional methods to make the settee but I'm super pleased with the outcome. For the full step by step on how I completed the settee, please check it out here Part 1 Part 2 Part 3
A white spruce base painted with hessian chalk paint and waxed with furniture wax over the top. Topped off with a section of oak block kitchen counter waxed with dark oak wax
Sat, 08/14/2021 - 08:26
Love the table top, with beautifully done corners.
Worked on this table last week to save me some money on buying one from a store. This was my first ever time in my life building something on my own and I was surprised how easy it was. Came out better then I expected.
Farmhouse side table by Home with Jules
My co-worker and I built these planters from pallets that we had lying around at work. The only expense we had was the Kreg Jig I purchased (and love). It took us about 5 hours to put them together, including the time it took to cut the lumber to size. Then we used Thompson's water seal and stapled commercial grade landscaping cloth inside the planter. We made them for work and hope they will just naturally age. This was an easy project and we will definitely make more of these.
We had leftover screws, landscaping fabric and water seal from other projects.
I was looking for an excuse to use my new Kreg Jig and also Annie Sloan Chalk Paint. My entrance from my garage had a cheap two level shelf which never was enough for all our shoes so when I saw this I thought it would be perfect. This was my first Ana-White project and the left cubbies ended up being wider than the right. I loved the Kreg Jig. What's cool is I did it all alone, with the help of my husband watching my kids! It was a lot of painting to get the distressed look that you really can't see from the pictures but I am very happy with it and it is very sturdy. I ended up doing 4 columns instead of 3 but only one shelf...probably also why the measurements got messed up.
I built this bed step by step from the Mom's fancy farmhouse bed - queen sized. I have no experience of building things before this, but bought a miter saw and nail gun. Banged it out in a weekend. More time was spent painting than assembly. I reused the slats from my old IKEA bed. In hindsight, I wish I had a way to even the boards better before assembly, like a planer.
Took the standard Braden Bench/Hutch plans and used a English Chestnut stain to really make them pop. If used a few plans from this site but this one turned out the best. Unfortunately I didn’t have enough space to use the mail sorting hutch plans for a middle locker.
DIY Stocking Stand - Reader build
I used the modifications posted for 2X4 wood.
I used pressure treated wood, so I will stain it next year!
The plans were easy to follow, this was my first project and went off without a hitch!!
I purchased 24X24 foam for 9 dollars a piece and sewed waterproof material to cover them! It took probably took just as long to make the cushions than to make the actual sectional....but well worth it. I just couldnt find the right cushions ANYWHERE!!!
Sat, 06/23/2012 - 07:37
Great Job! Can you tell me where you purchased the foam for your cushions?
Sat, 06/23/2012 - 17:55
I would check out your local fabric store! I know that I have seen it at Joann's!
Mon, 06/25/2012 - 17:53
Your couch looks great! I too am having a difficult time finding cushions - did you use a pattern to sew them, or just sew around the foam?
In reply to Awesome Cushions! by Britnie (not verified)
Thu, 07/05/2012 - 05:44
Try Costco! I got 24"x24" "floor" cushions (4-5" thick) for $20 a piece and back throw cushions 20"x20", 2/$15! They are a really nice quality and are labeled as outdoor cushions. Look at Thrift Inspirations' brag post as she has the same cushions I bought (different pattern.) I haven't posted yet because we're in the midst of building ours.
Fri, 07/20/2012 - 21:02
I Purchased the foam at a local fabric store,
And sewed around them. I actually folded the material
In half, and sewed two sides. I then measured and sewed the
Corners so that when inverted it would fit perfectly.
Then I had to closed each pillow sewing by hand... Hope that helped..
Sat, 09/22/2012 - 12:56
I got mine from Improvement Catalogs. They have a sale going on selling 28" x 22" x 4". I bought about 8 of them and theyre selling for $13.97 a piece. Its for exterior use obviously and mine havent faded in the sun. Ive had my cushions since February 2012.
Sat, 09/22/2012 - 23:17
If you have a Garden Ridge in your area, they had a nice selection of cushions and now that its season end they may be on sale right now! The cushions I used on my sectional I got from the Big Orange store and paid about $60 for a bottom and top cushion set. Very well worth the money! When it rains the water sits on top of the cushion and I just brush off with my hands and so far it has never soaked in, they still look new!
This is the bedroom set I built for my daughter. The Bed is the "Emme Twin Bed" Painted white. It is the 1st thing I ever built off of this web-site. The dresser is the mostly the"Beach Cottage Dresser" also painted white. I just left the trim pieces off the sides. Also, this one has something "hidden" at the bottom that we thought was cute. The night stand was just modeled after the same style as the dresser. I just kind of made that one up as I went along. My daughter loves her bedroom furniture. Thanks so much for the plans.
This planter box turned-out looking great! I put it together the first go-round using all kreg-jig screws, but couldn't get the pieces to sit flush with each other, so I took everything apart...and used star-drive screws instead of nails). I have decided that I hate nails.
I used the kreg jig to attach the 4 posts, but then used brackets to attach the rest of the panels -- this worked well! Once I put the slats in the bottom, it was very sturdy.
TIPS: don't be afraid to alter the plan. If you like working with brackets, use them!
This was our first try at chairs and they came out super! Even our Yellow Lab, Cassie was pleased! We made a few mistakes on the first chair which were easily corrected. The only thing I would add to the buy list is a 2x2 .
Made for my sons house. Just made a few changes to top with 2x6 and bottom with 1x6's.
ANW