Community Brag Posts

Some built-in bookshelves finished using milk paint. 

General Finishes 'Lamp Black' base coat + 'Driftwood' top coat, sanded down so 'Lamp Black' showes through. Yellow Ochre Glaze coat to add an aged look, then a quick coat of polycrylic for protection

Perfect size for my granddaughter and her growing book collection. Turned out great! Thx so much.

Trevor

I finally completed all of the pieces for the Eco-Office Desk! Needless to say, I love it! Once I bought the Pure-Bond Plywood for the middle desk and desktop, I wish I'd spent the few extra dollars and used the same materials for the end cubbies. The wood in the Pure Bond is beautiful, and there is really no comparison to the other plywood. I *may* redo the end cubbies in the future, but for now I'm looking forward to using the space.
For the finish on the middle desk and desktop, I used the Satin Minwax Polycrylic, and it looks great. Couldn't be happier.

This was the first thing my husband has EVER built. He's the kind of guy that's better with his mind than his hands, so this is a huge accomplishment for him.  We truly love this piece and are proud to have it in our home. 

We would like to add crown molding to the top in the near future. Also debating on adding a shelf in the middle to raise the TV so that the TV will sit in the center of the opening. 

My wife & I did this in two weekends, we're not that handy but your plans were easy to follow. Mostly reclaimed material. So fun & we love it!
Thanks!!

This was the first piece of wood work that I have worked on since I was 19; however, your site is so filled with such beautiful work, that I just had to make something.

Luckily we were in need of an entryway--a place to sit and tie shoes, hang coats, and have cubbies to store hats, mitts, scarves, as well as my gardening tools!

I modified your Braden Entryway Collection to fit the space I had, but I hope you agree that it turned out quite nicely, despite my novice alterations.

I'm very fond of the look and smell of bare pine, so the piece is only finished with Tung oil.

Thank you so much for such a rich site, and for an incredibly detailed 'how to,' I don't think I could have managed without it. I also couldn't have managed this without prednisone. I have Lupus, and normally I can't move very much without very severe pain, fortunately the middle to weeks of this prednisone journey left me feeling like superman! Lupus is degenerative so this may be the last piece I make, so I am inordinately fond of it!

The only drawback was that i had to borrow (and purchase) bar clamps, which I found indispnsible.

Many thanks again,
Jennifer

I've had this idea to build some sort of storage bench or blanket chest for quite a while now. I knew I wanted a classic look with detailed moldings and a solid wood top.

I have plans for this build avaliable HERE. 

You can check out my detailed video tutorial :

Two projects that I recently built for my wife and my daughter. My wife wanted a tea bar and a beach vibe, my daughter wanted an outdoor couch so it is made out of cedar. They both loved them.

Todd Springer

Work table for our laundry area

I loved he Hannah canopy bed for my daughter but felt like it was missing something. I decided to tuft the headboard and I used rhinestone buttons to give it that girly look with a small pop of glam. The tufting took probably 12 hours in total but totally worth it. We then followed all the instructions on how to build the bed with the exception of having any screws go in through the sides of the fabric on the headboard. We used plates to hold the headboard in place and screwed around the edges. It was time consuming but we love how it came together.

DIY Farmhouse Bed

Similar to: http://ana-white.com/2011/01/sausha%E2%80%99s-washerdryer-pedestals.

Dimensions and finish were unique to my needs.

I followed the plans exactly. The only difference is I used my Ryobi Airstrike brad nailer instead of stapler. Lowes was slightly higher in price than the $10.00 on Ana's post but at $11.97 it wasn't too far off!

Ana Whites site is always my first stop for inspiration, she always has good designs and diagrams. I usually use her plans as a rough guide, and then tweak them as needed.

For this table, I made it 42" square, and adjusted the height. 

The main difference is I built this from PT pine, and cedar as this is going to be an outdoor table, and I would like it to last.  I painted the frame with 3 coats of exterior semi gloss paint, and used Helmsman spar urethane for the top. I did not stain the wood, as I love the color variations of natural cedar.

I also used galvanized carriage bolts to connect the legs. This increased the costt, but I wanted to be able to remove the legs.  For more in depth connection details see my blog.

The table turned out quite well, is very sturdy and has gotten quite a few compliments, thanks Ana for the inspiration to build cool stuf! I love building STUFF!

Loved how easy to follow along the instructions were for my first ever project.

I saw these plans on Ana White's website, so I figured I would try to make one with recycled wooden pallets. It was a fun and easy project. I added a third set of legs in the center of the chair to provide extra support. Using the pallet wood offered a few challenges, mostly relating to the size of 2x4s you buy versus the ones used to build pallets.

The end user of this chaise lounge chair is going to seal it with a cedar colored stain/sealer so that is matches the Pallirondack Double Settee (one of my other projects) I made for them earlier this year.

Great plans, great fun.