Entryway console
![](/sites/default/files/20180827_181951.jpg)
Entryway console without base pieces to more closely match my other furniture.
![](/sites/default/files/20180827_211123.jpg)
![](/sites/default/files/20180827_181943.jpg)
Entryway console without base pieces to more closely match my other furniture.
Love how this turned out! Thanks Ana!
I've now made two Simple Outdoor Lounge Chairs and can't get over how sturdy they are! I also modified mine to have a 1x6 arm rest, but I ripped the back part of the arm rest so it tapered down to the 4" on the back side. I also made the chairs an inch taller on the legs since my family and I are tall.
We made this loft bed for my daughter's 4th birthday. I did all of the cuts, sanding, and painting on my own, and had my husband help me with the assembly of the bed. It took us 2 full days to complete this build. The sanding and painting was the most tedious part of the project. I think it cost us about $150 for all of the lumber, paint, screws, etc.
My daughter's really into playing with 18" dolls right now, so I decided to make a mini version of her loft bed for her dolls. I think it turned out really well and she absolutely loves it! The doll sized loft bed only cost about $15 to make (including wood, foam for the mattress and fabric). You can't beat that price for a wooden doll bed...and what little girl wouldn't love a matching bed for her dolls?!?!
I'm so happy with how both beds turned out!
Love how it turned out cost a little more if you count stain,wood conditioner..etc wasn't bad still.wood probably cost around 60-70 cheap and better then most anything you can buy.. Lots more to come
I followed the instructions for the Modern Geo Headboard but adjusted them to fit my bed frame because I don’t have a platform bed. I’ve refurbished pieces before but this is the first one I have actually built from scratch. It’s certainly not perfect but I’m so happy with how it turned out. Lots of satisfaction in knowing I built this and it cost a fraction of the similar one I wanted to buy in store. Thank you for the inspiration.
-Teena
I so wish I had taken a before picture! Last summer we did a lot to make over this bathroom. Previously the cabinets were a birch color with a white door (gross). The faucet was one that came with the house, cheapo builder's grade, a tacky medicine cabinet, and that oh so attractive Hollywood lighting. So we painted the cabinet black, replaced the medicine cabinet with a nicer black mirror, replaced the faucet and lights. That had it looking pretty decent, but the wall above the toilet had 3 small pictures hung rather oddly to hide some poor patch jobs from a busted towel bar. So when I saw the plan for the bathroom shelf I was thrilled! I made a few adjustments to the size to meet what I wanted and got started. I also had an extra 30 minutes before a birthday party we were leaving for and had some scraps already the right size for a simple step stool.
Thu, 03/07/2013 - 23:28
Oh! Your bathroom re-do projects sounds cool and abrupt. Myself being a bathroom lover usually spend times in Bathrooms. Besides always avid to observe the interiors. As you have done up with the black fixtures and cabinet, I guess it looks pretty stunning. Your ideas and the layout looks good to me and for sure I'm going to utilize my next afternoon.
My under the sink door cabinet is smaller than what's on the plan so i had to improvise. A paper towel dispenser won't fit anymore so I just made another shelf. I love it. No clutter and everything is so organized. :)
I made the table from rough-cut cedar that was harvested on my father's land. All I spent was $16 on Danish oil and $5 on sand paper but its priceless to me. Thanks Ana!!!
My take on a corner cupboard. I used old barn tim form backing and somewhat modified the plans. I actually made the hall tree first and then the matching cupboard. I finished it off with a custom distressed finish.
After I built the dresser for my son, he decided he needed a nightstand. This was his project, I only advised and offered assistance. He was 15 and he came up with the design and we glued up the panels. He cut, sanded and assembled himself. He stained and applied the shellac. I am very proud of him.
This bed is my first "for profit" bed. Took some design changes so it could be taken apart and put together easily with metal bed brackets.
Your plans are so clear and easy to follow. Your video on using the skillsaw to cut a circle was sooo valuable. We easily created the same jig and got really good results. I have followed your YouTube channel and blogs for years and wanted to finally say thank you for all that you share!
I needed new bedside tables to replace mine that were falling apart. I love the whole Stratton line at PB. I wanted to make something similar, but a bit more sturdy.
So, I made this table with a much more solid bottom shelf and a deep drawer with a full face to mimic the sides and the back panels.
The design for this feeder came from Ana's raised feeder as well and the people who have made these feeders with tile. I had a lot of fun making this and I love how it turned out! I can see how they would be addicting to make. I constructed the wooden base (I just eyeballed how long to make it and how tall to make the legs based on the size of my bowls). I nailed hardibacker to the wooden top and applied the tile with thin set and mortar. This feeder is for my bigger dog, so disregard my small dogs checking it out:) The grout was a dark tan color before it dried, and I really like the color it ended up being. I bought the tile and grout from the habitat from humanity store, which had a big selection of miscellaneous tiles for basically free! Fun project!
Very comfy outside sitting
I needed some extra shoe storage just outside our sliding glass door on our deck. I used Ana's easiest 2x4 bench plan with drawers, just left the drawers out and did some extra 2x4 framing. Once the 2x4 frame was built, I wrapped it with cedar fence pickets. This thing is sturdy and pretty much weather proof!
easy to follow instructions. I work in a hardwood sawmill as a sawfiler. I get a lot of wood from the mill. I bought a kreg pocket hole jig for the first time. Building the doors was easy. I'll never use mortise and tenon joints on small doors again. The door ornaments came from Lowes
Loosely based on the small cedar fence picket storage shed plan, this was my first attempt at making a storage unit with a roof. There was only one unplanned trip to the store (to replace two 2x4's that I cut to the wrong length). Pro tip: "measure twice, cut once" doesn't work if you measure the wrong length twice. Also almost lost two fingertips because I'm an idiot and forgot the most basic of safety rules for power tools, namely the "don't put your fingers near the blade of a circular saw when it's in use" rule. Very lucky to only come out of it with a good scare and some wounds that will heal without permanent damage.
Queen Farmhouse Bedframe made from Poplar and stained with Carbon. Don't remember brand name of stain. Finish is by General Finishes Flat sheen.