First big project.
I needed a new desk and found some plans on Ana's website.Made a little modification to it for a little more work space. Turned out great I thought. Had never used pocket holes before, I think I'm hooked now.
I needed a new desk and found some plans on Ana's website.Made a little modification to it for a little more work space. Turned out great I thought. Had never used pocket holes before, I think I'm hooked now.
Easy plans for a cool table.
Thu, 03/24/2022 - 09:47
Thank you for sharing! Great build and love the color choice:)
Loved Ana's Balin Console, but the space I had available for this piece was only big enough for two drawers, so I attempted to change it. A few minor mistakes called for a few other modifications as well (the drawer fronts), but overall I am still happy with the product. The first nail and hammer only project I've completed (other than the ten dollar ledges). The passion for this new-found hobby continues, THANKS ANA!
I think that this is my favorite project so far! It was a daylong project for the build and then another full day of sanding and finishing. My girlfriend needed a new table for a big dining room in her new place so she got this. She is happy it looks great and is extremely functional. I will add the bench that I made to match as soon as I get the pictures. I am available to do builds for people who like what they see and dont want to pay retail price for this stuff. check out my profile
I made two of these tables for a friend. She was very happy with them. One of my first projects.
My daughter's room needed more storage and the closet was the perfect place to add some! Visit the blog link for more pictures.
Awesome mechanic's workbench with sweet mods!
I was going to make this project out of pallets, but all the pallets that I have access too were pretty beat up and falling apart, so my mom gave me some leftover cedar fencing that she had on hand.
This is my first build using reclaimed wood; the boards looked pretty straight when I got them, and even after they had set in my heated garage for a week, but when building time came I found that they are warped. The boards dont fit exact, but I think it gives it more character.
My husband and I are debating on if we should stain it, paint it or just seal it. We plan on using it for a silverware caddy, since the house we're currently in doesnt have a single drawer in the kitchen big enough for a silverware tray! We do plan on using rope for a handle on it, but I have yet to find a rope that I like the feel of in my hands (Im picky like that).
I made this using hand tools, and 16gage nails (what I had on hand). My brother is currently hoarding all the power tools at his house and isnt sharing so I must learn how to do everything old school again!
This is also my first build of anything since becoming a mommy for the first time (6 yrs ago!), since then I've generally stuck to reupholstering things. Now I want better, less expensive things than I could just buy.
We had these spices in a cabinet, which were impossible to see stuff in the back. This was a perfect solution.
Now, we also had more spices then we know what to do with, so we added a second rack at the bottom of the door as well. I just adapted the plans to be 30 inches tall to accommodate the size of the lower portion of the door. This was accomplished by removing the 1st and 3rd measurements for shelves, and using the remaining for an extra tall shelf.
I also only used a finish nailer (and wood glue),to assemble, in combination with a brad nailer to hold the back plywood on.
I also chose not to include the dowel buttons on the end, and did not cut the dowels to length; they were inserted all the way through and trimmed off with a Japanese pull saw (get one, you will LOVE it), then fastened through the front with the finish nailer, then sanded flush.
I also elected not to paint to finish the piece and leave the natural wood.
I took the workbench plans, less the casters. I also added the shelf on top. It was fun to take the plans and then sketch out new specs to adjust for the rack
Saw the other project and based everything off of that. I made some adjustments on the shelf side to ensure I could lay down 3 layers of 2x6's without it hanging off too far. At first I wasn't going to go with the rail shelf system, but I couldn't find anything that I liked at the store to make actually shelves. I did cut a 2* angle on the bottom and top of the shelf framing. I figured if I put enough weight on those shelves, I woudln't want it messing with the frame of the cart too much. On the bin side, I decided to just do different heights instead of angled because I know I'll have plenty of 3' plus. I chose to put a scrap bin on the end for anything smaller than a foot. Many of those joints were done with my Kreg setup, but not all of them. The last fix I did was add a 2x4 to the insde of the shelf frame. This was to move the shelf hangers in so that an 8' board wasn't just edge to edge (I found that to be a problem when I put some of the 1x4's on there...they would be on 2, but not always all 3). So moving each side in around 1.5" gives you about 3" to play with as far as 8' lumber goes. This enabled me to turn my old storage into bench and shelves and I'm ready to get moving on projects!
Great project. Simple enough to feel like you can do it, big enough to feel accomplished when it’s done. My son loves his new bed!!
A *mini* Farmhouse Bedside Table
Mon, 06/06/2011 - 00:07
LOVE this as a nightstand! What a great idea! Beautiful finish too!
Sat, 06/18/2011 - 19:16
I have been looking around and haven't been able to find any measurements for the mini farmhouse table. Are there any or do you just have to wing it? I really don't want to wing it!
Mon, 02/06/2012 - 09:58
The mini farmhouse table cuts are found here: http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Tue, 07/05/2011 - 16:23
Yes! I would also love, love, love the modifications of this as a nightstand from anyone. This is my favorite nightstand. Pretty please?
Mon, 02/06/2012 - 10:01
I'm pretty sure that you've found the plans but just in case, http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Tue, 01/31/2012 - 19:01
This is exactly what my wife and I are looking for...plans?
Mon, 02/06/2012 - 10:02
http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Fri, 10/26/2012 - 14:16
I see theres a cut list but not a shpping list? I know...I'm needy! I'm a beginner!!!! :)
Mon, 04/14/2014 - 11:45
This mini farmhouse nightstand was my first building project. Of course Ana's easy to follow PDF's made it doable but check the tips above for cuts on your 2x2's. One rookie mistake I made was forgetting to double check my pieces. My 1x2's were actually thicker than 1" so they protrude from the side of my piece a bit. A sander could fix that. All in all so proud! Thanks to Ana and to everyone else for your brags.
P.S. A mini keg jig kit is SO worth the investment. I used standard wood-cost of about $20 including $4 for my drawer handle hardware. Kreg jig kit plus pocket hole screws were an additional $30 but I have plenty left for my next project;)
Simple white outdoor furniture. Easy to assemble. Ordered outdoor fabric online @ purchased bulk outdoor foam & cut it myself! Much cheaper than pre made cushions.
I made easy picnic table for my son over the weekend. The plans are very straight forward and easy to follow. This table fits two toddlers on each side but it was smaller than I thought it was going to be. I think my son will grow out of this by the time he is 4.
We estimate that the cost of this project was right around $50, but we had a lot of tools and materials already. This was a fun project and a great piece for the cost. I would suggest staining as much as you can before assembling those legs! Staining and applying poly was a pain in the butt! We used a dark mahogany Minwax stain and 2 coats of Minwax poly. It took us a while to do it because we have a 11 month old that keeps us on our toes.
Wife wanted a bench in the entryway of our house. But instead of your typical bench/coat rack I left the fronts open for either shoes or blankets. I also added a picture shelf at the top. Being a 96 year old Craftsman style house, this bench covers what used to be a second door to the front bedroom on the other side of this wall
Thu, 04/21/2022 - 15:04
Thank you for sharing, this is gorgeous and functional!
Will be making MANY more of these, so easy and a fun gift! This one was for my niece.
Fri, 06/10/2011 - 11:28
This chair is just beautiful! Really perfect, really! Thank you for sharing!
Fri, 06/10/2011 - 22:34
Loving the sling!! Simple and traditional which I am really getting into lateley. Love it!
I wanted to make chairs for a vanity that I made for my 5 and 3 year old girls. After I finished the chairs I decided not to attach the back and upholster the seats instead. They love them and so do I!! I measured each cut multiple times and took my time. I think that helped me tremendously because it all came together very easily!
Thank you Ana White!!
Address Sign