Nice design.
Using galvanized screws in the construction of this outdoor
table will prevent fixing points from rusting in the outdoors.
The screws suggested here could also the sprayed with a
galvanized coating available from hardware stores prior to
assembly.

did you also make the chairs yourself? i love the way this looks!!

I love the table. Can you put in a link to the bench and chair build pages if they exist? if not it might be an idea....

thanks for a great DYI blog.

Dear Ana and readers,

Thank you very much for all those plans. Like others have said many times, your website gives me the boldness to try and build something myself. But... I am one of your European readers and, since we don't use the same measurements or standards, I'm not sure how to interpret your instructions.
Could you, as an example, explain to me the following line ?
5 – 8′ – 1×4

Then I could "translate" the intructions more easily for the various projects in the future.

I very much hope someone can help me! Thanks a lot in advance !

Céline from Italy

I'm curious if you could give me the products you used to stain the actual deck? I love the gray and white! Thanks! :)

I have to say, I really like this table! I just made one of your adirondack chairs, and after I make the second, I'm going to be making this table (though a shorter version to sit at comfortably with those chairs.

I can't wait. This site is awesome.

does anyone have picutres of where and how many kreg jig holes are used to fasten this together. For example how are each of the table top boards attached to each joist? with 2 hole/screws or just one on each of 4 joists?

Also any addtional details on how the legs are attached would be helpful.

I want this for a Kitchen Table....are there any suggestions or modifications I would need to make?

I want this for a Kitchen Table....are there any suggestions or modifications I would need to make?

Great table Ana. Do you have the plans for the bench seats..

Also what wood would you suggest using.

Cheers from Australia

Love this site!! I want to build this to seat 10-12 people. I have read all the comments and don't get it. Can someone please be more specific as to how much material and cuts I need. This will be my first woodwork project!! Thanks Much!!!

Hi ana,i love your web site! i am a single mama in columbia s.c. and i love to do projects too. I am looking for a web site to build me a 24x24 ft. house for me and my little girl . i am looking at some land down here and i hope some one can give me a few ideas. if you have any pointers please send them to me . thanks and keep up the awsome craft projects and WONDERFUL web site!!!!!!!!!!!! I WILL be looking back on here.

Are the gaps necessary due to weathering or is it just cosmetic?

Hello! I just came across your site and fell in love!! Are there plans to these chairs and bench?

Thank you,
Jessica

Hello! I just came across your site and fell in love!! Are there plans to these chairs and bench?

Thank you,
Jessica

do the legs have to be installed on the outside? could they be done inside the framed table top ? just wondering if outside is a structural thing? Doe the apron also add strength.

do the legs have to be installed on the outside? could they be done inside the framed table top ? just wondering if outside is a structural thing? Doe the apron also add strength.

Why can't I find the directions for the chairs and bench? Please help, I am sure that is is right in front of me...I just can't locate them :)

I have some wonderful mosaic tile bought in bulk from the "Habitat for Humanity ReStore" and was thinking of creating a tile tabletop for this outdoor table - Instead of wood slats, I think a 3/4" plywood would serve as the top to place the tiles on. My Question -Would replacing the slats with plywood and Tile increase the weight of the top enough to require more support from the bottom?

If so, is Ana and Claydowling's suggestions of replacing the 1x 4s with 1x6s or 2x4s the answer, or does tile and plywood react so differently than wood planks to require different support? 

This is an amazing website - all the accomplishments here are very motivating!

This is truly great for mommy's out there. You can make your own like this at home since the materials are truly affordable. - YOR Health

Hey Ana,
I am so in Love with this site. Thank you so much for posting these plans.
I built this and the little bench yesterday. It took 6.5hrs. and well worth it. Such sturdy sturdy builds. I no more finished but we had dinner on it!!! My husband approves. I am also going to build the small stools/tables so it all can tuck under the table. I have enough scrap from this project to and the lounge chair to build the stools FREE.So $100 total got me a table, bench, and chair. Since our HD only carried 1x4's in 8' I bought 5 extra to make up for the 12' you called for. This gave me plenty of excess to play with.
Thanks again next is the Couch. Think Big and girl power to all!!

Lots of people had questions about where you could find the chair plans. I had to do some digging but here they are.

http://ana-white.com/2010/04/plans-simple-stackable-outdoor-chair.html

I'm excited to build this set this winter!

So less than two years after I built it, this table went in the trash last weekend. It appears pine is no match for midwest weather, even with a thick coating of outdoor paint. The wood had gone bad already and the table pretty much collapsed on itself when my wife put a bunch of plants on it while working in the garden - thus pretty much turning this project into a huge waste of time & money.

I found the plans for the chairs, but I still need the bench. Any clue when the plans will be out for it?

Thank you!

Do you have plans to make this for 8? I am new at this and not very confident in making my own adjustments. Also, I made the picnic table from pressure treated wood. Didn't think about it not being safe to eat on. I did paint it . What do you recommend for outdoor furniture that is outside in coastal weather? Any recommendations for the best sealer to use?
It needs to last? thanks

I made this with some leftover Tigerwood deck material.  I adjusted the legs to redwood 4x4.  Made the matching benches with the same material, but modified the legs to 2x4 redwood.

I love it too, but where are the plans to do the modified square table with the prependicular design? Sorry but maybe I just haven't looked deep enough into the site!

Thanks

Great plan - functional table. What type of wood is recommended for outdoor tables/ chairs like these? Especially for california weather. Also is there a plan for the chair?

Ana this table is great exactly what I am looking for, but how would I go about using this table with an outdoor umbrella? Would you be able to suggest this modification?

Would 4x4's be better for the legs?

Anyone know if you screw this through the top of table top or bottom?!?