My Farmhouse/homework table
![](/sites/default/files/1301931603706.jpg)
I saw the plans for the narrow farmhouse table and had.to.have.it! I showed my husband and he liked it but wanted turned legs. This was the compromise. I'm so happy with how it turned out!
I saw the plans for the narrow farmhouse table and had.to.have.it! I showed my husband and he liked it but wanted turned legs. This was the compromise. I'm so happy with how it turned out!
From the plans, we added 2x6's to each end of the table to make the table a better size for 6 people, and also used 4x4's as legs rather than the 2x4's suggested. It makes the table much more sturdy and even looks best in my opinion.
Modified the plans for the rustic x console to fit in my kitchen. This was my first furniture making adventure, but end product was worth it, even if not perfect. Final product is 41inches by 25 inches and is 36.5 inches tall. I used shiplap for the top, over leftover 3/4 inch birch plywood.
Changing table built for my first grandchild!
Fun and quick build. Made this one out of maple and African mahogany (khaya) for the laundry area of the garage.
I know this website is more about building furniture, but I spent the last year refinishing this dining room set in my spare time (between working full time and going to school part time). I bought it at a garage sale for $100, and with a lot of love, time, and energy, it is finally ready for family dinners!
Sun, 09/09/2012 - 22:30
Very good job. I myself love finding old pieces and giving them new life.
This Project was my second build. I had a few issues finding the materials required to even build it. Everything was found easily except the 4x4s. Everything here in my part of NC is either already pressure treated or cedar. Since everything else is Pine that really didn't float my boat. Plus for 1 4x4x8 of cedar cost $29 and for a color i didn't even want it wasn't even considerable. After calling around to a few places and no success i finally though of calling a lumber mill.
The Lumber mill had what i wanted for really cheap 4x4x8 for $5 but they were in rough condition. I had to do a lot of sanding to get them into workable condition. oh and by the way these are really 4x4s none of that 3.5in stuff here and man are they heavy.
Once i Started building my girlfriend decided she wanted the footboard to be higher and she didn't want to see any plywood for 1 we were going with a light finish and didn't think it would look to good. Instead of the footboard being at 20in high we raised it to 26. This allowed me to use some existing wood i already had to fill in the holes of exposed plywood. I used a 1x12 and 4 1x4s, i really only required 2 1x4 but to continue with the raised look of the footboard i used 4.
As far as the headboard goes i had to change that up a little bit as well. Im not sure if it was just because of the queen size or the fact that the lumber place i used to buy the 1x3s only had round edges so i opted to go with the 1x4s. Well because of that when i got to the last row of shims it was less than 1/2 the size. So resolve this issue again i used a existing 1x6 and replaced the top 1x4 with it. i made a line on the 1x6 which was taller then the headboard and cut it off with my circle saw so its now like a 1x5. Also on a side note when it came to the shims i cut them all 6in long due to the fact the center of the head board was 60in. it gave me an easy 10 shims per row. i used wood glue to hold them in place.
When it came to hooking the headboard and footboard to the bed frame i used 3/4s in-7in Lag bolts. this allows for easy on and off plus theres no way im breaking through them.
I loved this build but man those shim took forever. Sanding the 4x4s took me about 2 days. This job took me about 1 week to complete it working on it a few hours a night. But it was well worth it. I loved the way it turned out. its bigger than i though it would be but its workable.
Sun, 01/05/2014 - 18:13
You've really done a beautiful job! And I don't even like light-stained wood typically. Beautiful shim work.
Made a couple modifications:
That last bullet was super-important to the Mrs. She was adamant that the table should not have spaces in between the boards, yet she did not want any seams for crumbs to collect. The result was that I had to sand down the table top about an eighth of an inch... but the seams disappeared.
Also, we initially used Ebony stain... until we realized it was too dark. Sanded that down a bit, then went over top with the Kona stain. Result was a dark brown with some black detailing. Finished with some minwax wipe-on poly. Turned out really nice!
Thank you, Ana - This project was a ton of fun, challenging, and ultimately, very rewarding!
We had some very old Adirondack chairs that just broke on us (in the middle of summer, no doubt) so I went looking for some new ones. They were so expensive I thought I’d make some but I have limited tools (circular saw, drills, etc. but no band saw or mitre saw or table saw). Found these because they were fairly simple and didn’t require fancy tools.
It took me a couple of weekends to build four of them, and they still need another coat of sealer, but I’m stoked with the results, and they're SUOER comfortable too!
Thanks Ana for these awesome plans!
I had to change the plan to better fit my son's room. I changed the depth to 22 and the width to 34 to fit in the corner. Big lesson learned don't use the worst wood possible where the drawer slides go, yikes the rigging I had to do was awful. Atleast no one can see it is all under the desk. :)
I saw these here on Ana Whites site and fell in love and wanted to make one for my 3 year old. Well at the time (we now no longer have it) we had a huge chalkboard wall upstairs for my 4 boys and therefor the hubs told me there was no need to build these....but I have a friend who has twin girls and I new that was the perfect opportunity to build these cute things as their birthday presents! So that is what I did. I also made a zipper pouch to hold the chalk. The girls love them :)
I had a half bathroom in my guest room but wanted a second full bathroom, so removed the sink out of the half and installed a shower. I built the vanity in the room and added a make-up area with seating. I used my Kreg beaded faceframe system and to add a bead around the faceframe and built inset doors and drawers. I used Behr paint and used valspar antiquing glaze for the finish. I used the leftover shower tiles to make the countertop.
This is the Ipex bookcase (plans on this site). My husband built it for our almost 11 year old's room. He modified it to be 36 inches wide rather than 48. Painting scheme done by me - she is into black and white/zebra.
We are pleased!!
Loved building this and especially love that those who have seen them in person are asking me to build one for them. Thank you Ana White for making your plans easily available.
I've always wanted Adirondack chairs but found them way too expensive to buy. I found Ana's plan a while ago and promised myself I'd make one this summer. Well I enjoyed it so much I did three of them!
Mon, 08/15/2011 - 08:31
Those are awesome! All you need to make now is a doll adirondak chair and you've got a complete set of Ana White Adirondack chairs! ;)
Norwegian version.
Wood sizes in millimeters:
Can be bought from Byggmax, Monter or Coop Obs bygg for example.
36x48mm
48x98mm
48x148mm
Lessons learned: Dont buy cheap tools and make sure the wood is straight.
We love this little desk for my 3-year-old's room. She chose the light blue color and helped me paint it. We used Valspar chalk paint and wax and love the look. We didn't have room for the double-sided storage so we used pre-made table legs for the other side. Thanks again, Ana!
p.s. Sorry about the photos rotation. I have no idea why they are all sideways.
I just wanted better organization and shoe racks up close to the front of the closet instead of in the back but I also didn’t want them too deep. These plans fixed that.
Wed, 01/02/2019 - 12:14
This is awesome!!!! I'm so excited to see the closet built and to read that it is working well for you! Share some more pics sometime!
Made one change to plans. I used 2x6s for the arms. I used the Shou Sugi Ban burning technique to finish the 2x4s and 2x6s. I stained the back and set and the applied a couple coats of poly. Love the chairs! Building a couple more sets for around the fire pit. Thanks!
Thu, 09/15/2022 - 08:25
Love the wider arms and the finish is beautiful! Thanks for sharing.
I built my new sofa!
I am so happy how it turned out. I had to translate all the instuctions in french, and modify the dimensions to adapt them to the lumbers I found in my country (France)
I had to change inches in centimeters too.
It was just a little difficult but I built it!!!
Thank you so much Ana, I am one of your fan.
Wed, 08/17/2011 - 07:07
Excellent work! Where did you buy a Kreg Jig? Is it available in France?
Wed, 08/17/2011 - 11:18
Wow. This just turned out amazing! Love the finish on it!
Fri, 07/27/2012 - 06:44
Did you use a mattress for your cushion? Did the plan fit that for you, or did you have to modify?
Fri, 07/27/2012 - 06:45
Did the plan fit the mattress exactly or did you have to modify it?
Fri, 07/27/2012 - 17:30
I don't know the size of a twin mattress but my pillow measures 180cm of length and 60 cm deep for a thickness of 14cm. I bought a foam mattress of 90cm of wide and of 190cm of length and I cut it. They are the size of a child bed in France.The size of wood are different here thus the sofa has no same dimensions as on Ana's plans. I adjusted according to the wood available here.
I had very little clearance on the long side of the shed, so I opted to put the door on the short side. Thanks for the plan, it was a great starting point for my project.
Tue, 09/10/2013 - 10:15
Thanks for posting! I plan to make this shed. Yours turned out beautiful!