Community Brag Posts

In my new house we have a small room that can fit a full but also have a tall family, so when I found out that there is a Full XL, I went on the hunt for bed frames and not many choices, so I turned to Ana's site and found/used the essential bed frame for all sizes plan and adjusted it for a FullXL. Our house theme is black and white so we painted it with Ink Black by Behr. Whole frame built for $50 as I already had the paint. My wife loves the frame.

We've been talking about making this for quite some time now, probably close to 6 months. Mostly because we've never made anything before we kept putting it off. We had a free weekend and decided that we needed to complete this project that's been hanging out there for way too long. We'd researched where to get the wood, and what we wanted, but still did a little more planning. Thursday night we went to the big orange box and checked out their options for 2x4s, plywood and moulding. Friday I went to our local Ace lumber yard and looked at their options.

Friday night we decided to get the 2x4's and plywood from Home... the big orange box since their plywood was much more level. We paid a little more for the grade A plywood, but didn't want MDF as it will disintegrate when it gets wet. Not planning on getting things wet, but just want to be sure.

We got the moulding at the local supply store along with screws by the pound and corner brackets.

As you can see in one of the photos, we had the store cut the plywood for us as we didn't have access to a table saw. We borrowed and used a compound mitre chop saw for the rest of the cuts. Since we had so much leftover plywood and really liked the look of Sausha's wider pillars, we decided to go with facing out the front and left side (the only ones visible in our location) and columns and put moulding on the front and one back leg showing. For the moulding we only faced the back and right leg with two pieces. In hind sight as the pedestal doesn't go against the wall we could have gone all the way around, but that might have added another weekend.

Saturday we started out getting the rest of the necessary wood, laying out the boards and deciding how we wanted to proceed. We ended up following the directions and not making any changes to it. The only change I thought about making was to take the 2x4's all the way to the ground rather than mount them on the bottom decking. We decided since this has been made quite a few times and haven't seen any bad reports, we'd stick to the plan.

Saturday we worked about 9 hours total putting everything together, facing out the project and filling the screw holes with wood putty. My only regret at this point is that I didn't fill the top edge of the faced plywood all the way across with putty. In order to get a much cleaner look, if I were to do it again I'd have bought a tub of wood putty and filled the entire edge to eliminate any holes or spaces from the edge of the plywood and the seam between the face and decking.

Sunday we started out by sanding the wood putty down, reapplying where needed, sanding the rest of the rough edges flat, and then started on moulding. The moulding took a better part of the day to get the angles right, and thankfully we had the compound chop saw that would do greater than 45 degree angles. We glued and nailed the moulding down, and then took the project into the garage to paint as it was getting late on Sunday. Three coats of paint smoothed out all the edges. Be careful about drips on the corners. We decided to go with something other than 1)trying to match the washer/dryer and 2) black as it might attract too much lint and show. In the pictures it's actually a lot more purple than in real life, but it's a gray paint with a tint of color to it, Behr premium primer and paint in one.

We put the stand in place Monday evening, although the paint was still slightly tacky. The hardest part about the end was getting the washer and dryer up and hooked up. We needed to put the washer up first and connect it as the hookups were behind the dryer and no way we could have connected it with the dryer in place.

We love it! It's raised the washer and dryer up to a decent level, saved us at least $350, and now have room to put baskets underneath. The whole thing rattles quite a bit when the washer spins up, but so does the house and the TV stand 2 rooms away...

Due to a few bad cuts, we ended up having to get an additional strip of moulding. If you're not experienced in doing moulding, plan on a LOT of waste. ;)

Our next project needs to be a matching recycling center which will go right next to this.

Modified from the plans for the simple day bed - link - http://ana-white.com/2009/12/plans-simple-daybed.html

Another visit from my friend Lisa and her miter saw - this time we were joined by my daughter Claudia. We changed the height of your indoor day bed from 31" posts to 44" posts in order to have enough height for people to lean back.

We used cedar so this can be left outside year round (I'm in Toronto, Canada). The lightweight foam single mattress can easily be removed.

Thanks for the plans!

We built this firewood storage shed to hold wood for our wood-fired hot tub! We built this using reclaimed materials we already had sitting around our property so in the end, the only costs involved were the pier blocks plus some screws.

We decided to publish our plans for anyone that may find them useful! Take a look here if you feel so inclined: http://purelivingforlife.com/diy-firewood-storage-shed/

Chicken Coop Built by Dan

These are the first pieces of furniture I have ever built. The first bed was a project for my daughter and me only, but we let the guys help on the second bed. I copied the finish described by the blog. Everyone was real doubtful that it would work, but it turned out great. My sons love their new beds!

Castle bed

We finished the deck this summer and wanted a large table to put on it. I saw the different versions of the outdoor Ana built. This one seats eight and has a tile inlay. For now...chairs from Walmart provide seating.

Simple project to do with the kids.

Video:
https://www.youtube.com/watch?v=S4EDpDPf6DI

Instructions:
http://www.instructables.com/id/Pallet-Wood-Painting/

My husband made this for our Grandson last Christmas. He loved it!

I am in process of making these for my new twin nephews. By reducing the width of the toy box by 1/2", I was able to fit two of the open top toy boxes on one sheet of cabinet grade plywood ($30).

For Two Toy Boxes cut plywood to the following dimensions (see photo for layout):

2 - 32 x 15 1/2 pieces (bottoms)
4 - 33 1/2 x 15 1/2 (front and back)
4 - 15 1/2 x 15 1/2 (sides)

My local Home Depot does not charge for cutting the plywood and the person that was assisting me made absolutely perfect cuts and helped direct me to the cabinet grade plywood (which was located away from the plywood aisle), thus saving me an extra $15.

Boxes took approximately 2-3 hours each to build, another hour to sand and fill screw holes, and several hours to paint.

Photo is of Dexter's toy box. Dante's looks very similar. My 2 year old niece enjoyed taking a nap inside of the boxes as well.

Make sure to purchase non-toxic paint.... I believe one of my nephews may be part beaver!

I was contacted a few months back by a friend of mine to build a custom cabinet for his aquarium. I was given free reign with the design and I decided to go with a modern look to the cabinet.

I decided to go a little unconventional with the finish on this cabinet and use something I am very familiar with, an automotive finish. I chose to got this route because I knew that I wanted an ultra smooth finish. I knew that because he was using it for a large aquarium it was going to have to be built sturdily. But you can use whatever type of materials and finish to suit your project. 

I built this a couple months ago and I'm finally getting around to posting a brag post. This is the second woodworking project I've ever done and my first year gardening! I almost spent over a hundred dollars on one of these raised garden beds and then I saw Ana White's plans and I am so grateful! Hopefully my tomatoes will be ripe soon, but one thing is for sure... this raised garden bed paid for itself with the amount of veggies I'm getting from it! I have big gardening plans for next year! Sorry my second pic is sideways... can't figure it out!

This is the 2nd Rustic X Coffee table I built. This I built as a wedding gift for my Brother and His wife. Instead of the X posts on the ends I opted for a column design on the end. It was actually a little more time consuming but I think it looks great.