Community Brag Posts

It didn't take me long at all to make these. I enjoyed making them and all my neighbors love them. They have a nice amount of space. I actually had to make mine smaller than the instructions. I had most of the wood on hand.

With the remodel budget for my powder room only being $300, I needed to get creative with the vanity. The room is tiny, so the vanity needed to fit well in the space and allow us to still move around. I had rescued this board from the dumpster at church when it was being remodeled and kept it in my garage until inspiration struck.
I'm not a carpenter, I try and I'm learning as I go, but the vanity turned out great for me. I made it to fit the $15 Craigslist vessel sink and the little nook in the bathroom. The towel bar was $1 at my local restore. It's nice and sturdy attached to the studs with "L" brackets.

For the tutorial on how I built it using one board, visit my blog.

We have a limited amount of counter space in our kitchen, while also having a large open space that is unused. We've always planned on including an island once we renovate, but we didn't want to wait. We decided to build a butcher block-style island with open shelving underneath - a simple design that would give us all the counter space we needed and some additional storage space.

We bought a premade bamboo tabletop, as well as 4x4 cedar posts for the legs, 2x4s for the framework, and 1x2 slats for the shelf.

You can see all of the details of how we built it in the blog post, but here are a few of the features:

- an interior framework that connects to the tabletop and outer framework so that no screws are visible on the outside

- countersunk GRK structural screws used to attach the legs htat look like carriage bolts

-feet are angle cut so that floor is less likely to be scratched if the island is moved

We're really proud of this build and are enjoying having so much extra counter space. It's amazing what you can get done in a weekend!

This project goes together very easily. Had my adult son come by and make it for his daughter.

Did make one adjustment ... the supporting bar on the small frame ... the one that determines the opening angle ... at 6" the chair was too open ... at 6 1/2" it was more comfortable for the little ones. We used glue and air-gun brads for joining ... once dry I was able to sit in the chair without collapse!

I wanted a bookcase for my son's room that would add some color and be a functional storage unit for his books and toys. I did not buy the highest grade of pine because it would have doubled the project cost and I knew I was going to paint it. The only trouble I had was that the boards were a little cupped so the shelves don't have an invisible fit. I used stock moulding and cut down the base trim to fit. In hind sight, I would have not done the adjustable shelves. I like the symmetrical look of this and can't see myself moving them. I did make a cleat to attach it securely to the wall so that a busy climbing boy wouldn't pull it down on himself.

This is my take on the classic Oliver String Puzzle. It was built from scrap wood, a ring from a previous project, purchased wood beads and rope.

The goal is to remove the ring from the puzzle. My kids and wife found it quite challenging. I would rate the skill level at 3 out 5. If you can't figure it out from the pictures, refer to the video.

Build Instructions: https://www.instructables.com/id/Oliver-String-Puzzle/

Solution: https://youtu.be/VTb0IlMXSiU

I needed a console table that would fit in a fairly small spot and knew as soon as I saw this plan that I wanted to create something very similar in a scaled down version. Made a few modifications to the original other than size, like using a solid piece of wood for both the top and bottom panels.

The building plans are easy to follow and it all went together easily. I included the modified cuts on my blog if anyone else out there needs a little table like this one.

A house warming present for my little brother and his wife 

This my version of the Farmhouse Bed.

http://ana-white.com/2010/03/farmhouse-bed-calif-king

A friend of mine wanted just a headboard and so I set out looking for a style that would compliment his home.

My lumber stash is primarily made up of reclaimed pallets and salvaged 2x4 lumber.

The only thing I had to buy was the 10' 4x4 post that I used for the legs.

I used star drive, self tapping, deck screws to assemble this beast. As the style is rustic I didn't bother trying to hide any of the holes.

Once assembled I sanded it twice and then "pickled" it to get that "barnwood" look.

The vinegar used in the pickling process should kill any microbes for those who would be concerned about using reclaimed lumber in a residential setting.

Using the "Y Truss Round Table" plans, I created a 48" table with metal accents.

I am a welder by trade and metal is what I do best. I have a few friend in the woodworking industry and they make it seem really easy. so with the help of a friend and my wife getting me a table saw I mad her this console. This was my first build and starting out I was walking around finding wood like I was looking for my lost mother. after a short weekend and learning from my mistakes and the plans from Ana White being sooo darn good to follow step by step my wife has this beautiful console in the living room.