Community Brag Posts

I am going to be a first time Grandma and this project has been on my mind to make for him as soon as I saw it!!!
Assembly was a little tricky as I felt I needed to be sure it was very sturdy and safe. I also felt a bit out of practice as I haven't been making stuff as much as I was in the past, it may be more of a beginner level project, but I definitely needed my dad's guidance and assistance. (Thanks dad!)
I felt it needed a thicker wood for the body of the scooter so I used 1.5" wood instead of 3/4".
I am unsure on the time to make as I worked on it in the evenings after work. It did take more time than I expected, but I am super picky and wanted to add some extra touches to it.
I found the perfect monkey and bodysuit with scooters on it and that made it the perfect baby shower gift!

My son is a big Mario nut. And when it came down thinking about a new bed for him we sat down online and started searching for ideas. When we found this bed we both loved it right away. And when i found it was made from plans on Ana- white i was so excited as i have made a few projects already. My son was so happy the whole time this was being made. He was going to have his own castle. Once we finished the build he decided that he had to have a door so i made some curtains and embroidered Mario characters on each one. I let him decorate the inside with Mario stickers and he loves being able to have a Mario level right where he sleeps.

This was an awesome, quick, and easy project. The sanding, staining, and drying, took forever for me but the actual cutting and assembly was super quick. I have this on an uncovered patio and my local store didn't carry cedar in the sizes I needed so I went with the cheapest wood I could find and used a high quality oil based outdoor stain. I am hopeful it will hold up to our pacific NW winter because it won't be coming in. Considering I had never made anything before and had never used a miter saw, sander or quick square, I am happy with the time it took to finish this.

Kitchen cabinets and shelves in our breakfast nook. Our new kitchen does not have enough storage, so I’m creating my own! A matching set is in the works on the other side of the window.

My daughter found some of these online for $400+ refinished. I was able to locate some locally and did all the refinishing myself and saved a bundle. I have finished 6 of these carts to date. They are old railroad luggage, cotton bale, and whatever movers. They were manufactured around the early 1900's. The ones I have done were made by the Lineberry, Nutting and Globe companies. One piece of hardware is actually cast with a date of Feb, 26 1907. These were a lot of fun and hard work. I carefully disassembled each one including the original nails to be resused, I did not repair any of the wood, just presevered it in its original found state. As you can see from the pictures there are a lot of splits, cracks, and checks in the wood. I wanted to keep those as they added to the caracter of the table. As you can see in the before and after pics there is quite a amazing difference.

The structural elements of the "classic chair" are excellent and so adaptable.  I simply lengthened the leg to produce a conventional 19” seat height and extended the back frame dimensions to provide a higher seat back.  I also substituted 2"x4" framed seat bottoms featuring slat inserts for the plywood seat bottoms. Most of the frame materials are Doug-fir 2"x4"s ripped down to 1.5"x1.5"s.  The slats on the seat-bottom and chair-back are cedar fence boards ripped down to 2.5" wide.  

I wanted a tv/ fireplace for Christmas and my husband built this using your plans. I love it!

This was made from Anna's Farmhouse bed for dolls plan and the trundle plan. I bumped out the dimensions since my DD has a "My Twinn" doll as well as American Girl Dolls and the My Twinn is a few inches bigger.

It was hard to find bearings for the bottom of the trundle so I used drawer runners instead. I also made the trundle first then sized the bed to fit around it. I added a facia to the trundle for decoration with mitered side edges to give a "lip" to pull the trundle out.

This was my second project, made on my first project... the workbench!

I loved the Fancy Arch bed but I only wanted a headboard. I modified the plans to be just a headboard. I love the way it turned out!!!

RH Balustrade Coffee Table

This little dresser kicked my tushy! It was my second project and I was feeling confident coming off that first one and boy was I brought back to reality quick. If the measurements and cuts aren't perfect and I mean perfect it takes a lot to fix it and make it work! But I finally got everything worked out and it looks pretty great in my little foyer I think. I stuck to the plan everywhere but the 1x2's that go across the "drawer" parts because my wood had a slight warp to it I needed a 1x2 running vertical up the back to keep my shelves even and therefore the original 1x2's wouldn't fit. You can see it in the open picture. I used jute webbing in place of the 1x2's to keep the shoes in place. The front is quarter inch ply added to make it look like a dresser with cabinet. I took someone else's idea to use the ply from the brag post and found a dresser to emulate. That part was actually pretty simple! I love this site for that very reason, so many great ideas in one place! I painted the inside a barn red for a surprise pop of color and that's that.

My floor-to-ceiling garage storage is 6' w x 8' h. I wanted to utilize the entire height of the wall for the rack. I also created a small cubby at the end for tall items like brooms, poles, etc. I also added 2x4 pieces on the top, sides and foot of the rack so I can add doors to hide the clutter stored on the shelves.

Built 2nd bookcase. This one for youngest granddaughter.

Mudbone1959

Made my version of the Tryed table out of bowling alley maple which came with a purchase of nicer wood a while ago. The maple has random nails in it so instead of making it nice I just ripped it on the table saw leaving all the saw blade marks and holes etc. I thought I was gonna end up burning it but it turns out I have use for all this stuff! The construction is easier than the plans given. I omitted the inside supports. Just a top, 4 legs, 4 side skirts. Use pocket screws for skirts and legs, and 90 degree brackets for table top. Getting crooked distressed wood to glue up / line up nice nice is not as easy as using straight wood. The table top is tricky to glue up without squeezing out glue, so let it happen. Don't be tempted to wipe it off right away. I waited till it hardened then used a properly sharpened floor/paint scraper to scrape away excess, leaving a bit of distressing behind. You can't sand it much because you will erase the distressing. Crooked distressed wood doesn't glue and assemble as well so you must accept that it's not perfect. Believe it or not it took me 16 hours to complete this using: cheap table saw a very good quality DeWalt mitre saw Kreg Jig, drill bits and screws drill biscuit jointer to join the table's bread board ends (can use Kreg jig instead) lots of clamps glue floor/paint scraper (NOT A PUTTY KNIFE) measuring tape pencil COST $0

I have a friend who is a wedding coordinator, and she was doing a Gatsby themed wedding, which needed a marquee frame for a chalkboard picture she wanted to make. She couldn't find a nice (suitable) old frame to drill into, so she asked me to put something together for her.

Taaa daaaa!

The chalkboard comes out so she can put a 24" x 36" poster in there for an entirely different look. The whole thing is self-enclosed so that the wires aren't all sticking out the back.

I think it turned out pretty great - what about you?

There are more details about it on my blog.

I recently spotted a little gem in the garage - a little space in between the garage doors.  It was perfect for building a modular system of small French cleat box shelves.  I made them all using scrap wood.  I even had extra scrap wood to make a battery charging station in another narrow gap on the wall.  You can read all the details about my latest storage adventure on my blog:

http://www.justmeasuringup.com/blog/using-commonly-lost-garage-spaces-for-storage

I'm on high alert for more areas like this that get overlooked easily, and am just waiting for more inspiration to strike!