Rustic X Farmhouse Coffee Table
![](/sites/default/files/IMG_2280.png)
Rustic X Farmhouse coffee table, built for a true rustic farmhouse!
Minwax Polyurethane (5 coats, lightly sanded between each)
Rustic X Farmhouse coffee table, built for a true rustic farmhouse!
My wife came to me with a ad for a table and told me it would look great in our kitchen. I agreed it would except we can't spend 900+ on a table. Then I offered to build her a table without EVER having done this before.
Though this website I came across the easy to follow Farmhouse Table plans that for me took a lot of the guesswork out of this project. The material list that comes with every plan here was a huge help. In the end I think we ended up with a great table that will last for years to come.
There is a great feeling of accomplishment sitting down at a table you built with your own two hands. My wife hopes this will become my new hobby as she is searching the site for project #2.
Trust me when I say if I can do it anyone can.
Tue, 04/16/2013 - 09:05
Very nice job on this table, I have no experience in woodworking but want to tackle something like this. Hopefully I can get the same result. Any reason you chose cedar over pine?
This is my second build of the Providence Bench...finished in Annie Sloan emperor's silk and General Finishes burnt umber glaze. So much easier the second time around that I included a tutorial at www.ourhomemadefamily.com.
Wed, 09/03/2014 - 21:17
This is my second build and it was so much easier that I included a tutorial at www.ourhomemadefamily.com
Thu, 09/04/2014 - 07:58
Cool bench! Home made. The red looks wonderful against the rustic weathered siding.
In reply to Cool bench! Home made. The by Stephen Peters
Sun, 09/07/2014 - 21:10
Thanks so much! I have more ideas at www.ourhomemadefamily.com
I followed Ana's plans exactly except I extended the headboard's 5 panels from 6" to 9"
I started woodworking about 4 months ago and the first few things I made was a bit wonky. I didn't mind because it's solid wood and I was proud of myself for doing it.
I am 59 yrs old and I love building things! I now do better and made this shelving unit, and it's the best I've done so far.
Benchwright Coffee Table built from Ana's plan. Minwax Dark Walnut stain & Satin Polyurethane
I've never built furniture before but had leftover wood from other projects and was in need of a nightstand for my daughter's room. The plans were very easy to follow. I did add a little trim to the drawer. I love the end result and can't wait to build something else!
Built this for my daughter’a remote learning space. She chose the color of the base (ballet slipper pink). Minwax dark walnut for the top and 3 coats of poly.
New to woodworking, first Ana-White plan. Changed the dimensions a little to fit our living room decor. Bottom shelf is 2x8's. Ground through the learning curve but pretty happy with the end result. Hand distressed the project. Kreg jig made it much easier. Love this site and looking forward to building new projects!
Tue, 09/09/2014 - 07:32
Hello!
I'm looking to scale this project down for my living room as well - do you mind sharing your final dimensions?
Thanks!
Tue, 09/09/2014 - 08:37
Top surface: (4) 2x6's cut 42" long - which will be 22" wide;
Breadboards: (2) 2x4's cut 22" long - Top surface becomes just shy of 49" in overall length;
Bottom surface: (2) 2x8's cut 36" long;
White frame: 18" wide to the very outside edges,
43" long to the very outside edges,
Hope that helps.
After making the farmhouse table and bench I was excited to try a bed for my next build. I wanted something simple for my 5 year old son that wouldn't necessarily be outgrown in a year or two. I truly like the simplicity of this bed and the price point for making it was even more attractive. His entire bedroom is white furniture but I did not want to completely cover the grain of the wood. At the same time, I wanted to ensure this bed was going to match with the rest of his room. I decided to do a white wash finish and then a clear coat. It turned out perfect; matches his other furniture and still displays the wood grain. The bed was beyond simple to construct. I had two worries prior to starting the bed: the curve on the headboard/footboard and how sturdy the bed would be given how the rails attached to the headboard/footboard. For the curve on the footboard and headboard, I used a scrap piece of cardboard to trace a curve for half of the piece. Once I was happy with the curve I cut out the cardboard and transferred the curve to the headboard and footboard. I did half of the curve so I could guarantee each side would be identical and made it easy to have matching headboard and footboard. I intended on buying some hardware to make the bed more sturdy based solely on the plans. However, once I had the entire thing put together and I (6 foot, 200 pounds) got on the bed and moved around rather violently without any movement. since this bed is for my 5 year old, I have no worries about the structural integrity. For the whitewash finish, I simply mixed a couple ounces of spare white paint I had with water (1:1 ratio). I used a rag to rub the whitewash into the wood and ensure even coating. I completed the project with a satin polyurethane.
I built this iteration for my second son to give him a spacious workspace for his schoolwork, dual-enrollment activities, and for the occasional moments of kicking back and enjoying a bit of PC gaming.
We stained it with Minwax #215 Red Oak and used Minwax Satin polyurethane to finish ours.
I stuck to the Rustic X Desk plan for the most part and made the following modifications:
1) I used five 2x6 planks instead of four, to give it a 27.5-inch depth.
2) I used a 3/4-inch roundover bit to round off the tabletop to give it a smooth feel.
3) I left out the "middle" X, so my son could have easy access to the "guts" of his computer
4) I left out the middle shelf so my son could stow his PC tower "below deck"
5) Not really a modification; I used a 3/4" straight router bit to cut notches into the 2x2's used for the X detail so they would sort of lock together because I wasn't happy with the way the angles and all were coming out with the two half-leg parts of the X detail.
6) I hated the selection of furring strips at the local big box home improvement store and didn't want to travel all the way across town to see if the "lumber stores" had anything better, so I ended up milling my own on my table saw from cherry-picked 2x4 lumber. It was cheaper than buying the premium pine to boot, since a 2x4 would give me a pair of 2x2s and leftover 1/4x2 that I'll be able to run through a planer and turn into something useful. Not a modification, just more of a "if you're plagued with lousy selection, try this instead" idea.
7) Installed a Wiremold WMC220BK convenience 120V/USB power center to make it easy to plug in a desk lamp, charge a cell phone, etc. without making a cable mess. (https://smile.amazon.com/dp/B0768R2JDG)
8) Added felt pads under the feet to make it slide easily on wood/vinyl flooring
9) I set the bottom of the leg assemblies 1-1/2 inches above the floor instead of 3 inches, so our indentured robotic servant "Mo" won't get trapped underneath any of them. He isn't the sharpest tool in the shed but at least earns his keep. Mo is a late-model Roomba 675, if any are curious to know.
Between the "custom" milling and the fact that I should have run all this 2x4 and 2x6 through a planer to cut down on all the sanding and resurfacing needed, this ended up taking a lot longer than the initial couple weekends to build plus the staining and finishing time. I'm in the middle of building a second one of these with some slight modifications since the need/use case is a bit different. I'm also planning a third revision and build that will include some "geek-friendly" customizations, namely integrated cable management and will have two shelf bays instead of one, just half as wide (a single 1x10 on the left/bottom and another 1x10 on the right/bottom, with the seating area in the center). The third "generation" will be a Christmas present for a computer science student (who consequently also graduates at the end of this fall semester).
This table is perfect for our screened in porch at the lake house. Everyone seems to gather there so we have rockers and casual seating. When we want to eat out there we just open the table and move it to the center.
Thu, 11/29/2012 - 04:22
NCLimo...you do really excellent work. I shy away from curves because my jig saw has a mind and GPS of its own. And to build this table in an afternoon is amazing. I would probably take several days. Keep the projects coming and offer any advice you can throw my way.
Made this cabinet to go between the fridge and stove in my kitchen. I based it on the Emerson plans (although heavily modified) because I love the looks of that buffet. Came out huge and quite square (its about the size of a washing machine), and it holds soooo much. Great to have that much extra storage in the kitchen.
my first grown up furniture! I didn't start small lol. I listened to the advice of others who'd made the bed and sanded and stained each shim individually. Lots of work, but well worth the time and effort! It did take me all summer lol. I used minwax gel stain 606 and used a glossy varnish. I did make matching night stands, with a plan from another website. Super pleased with how it turned out!
Thank you Ana for the plans!! I haven’t built anything in almost 20 years, My daughter and I built these together!! It was a great way to spend time together and we are now planning on building the matching coffee table!
This was my first project from scratch.
I used the following resources:
Kreg Jig
Table Saw
Random Orbital Sander
Jigsaw
Bosch Power Boss 360 Radio (for my sanity)
I used the following materials:
2x2 Furring Strips
1x2 Furring Strips
1x6 Cedar Planks
1 1/2" Pocket Hole Screws
1 1/4" Pocket Hole Screws
2 1/2" Pocket Hole Scerws
Minwax Prestain Wood Conditioner
Minwax Classic Grey Stain
Minwax Fast Drying Polyurethane
Magnetic Touch Latch
Hinges
Handles
*Project Idea was based on the following item:
http://www.porterinternationaldesigns.com/ge5016-plasma-tv-stand.php
I altered the design and materials to fit my needs.
I found the bead board and post for the legs at a reclaim store. I had so much fun doing this!!
Found the writting desk on an online yard sale site for $25. Desk is all wood except the top which is wood with a laminate overlay. The top had severe water damage and could not be reused. I used 1 x 4 pine furring stipes to make a new desk top and frame out the drawer which was originally a key board tray. The paint used is Behr paint and primer flat Shadow Mountain. After the paint set for 48 hours I used a cream wax to protect the finish.
À partir du rustic x desk, j'ai modifié pour l'adapter à mon besoin.