Community Brag Posts

I have done quite a bit of woodworking never being great at any of them . But I truly love furniture building. 

I have built several furniture pieces in my home several coming from you.

Built this for our Daughters 4th birthday. Both our girls love it! If we had not painted it with outdoor paint we would have been done in a few hours. It took awhile for the paint to dry and we did multiple coats.

I needed a better way to store my fire wood. The rack that we had only held enough wood for to load the fire place and add 2 or 3 as needed before the wood was gone. I wanted something that I could hold more wood.

I was looking online at different racks and came across something that looked like a bookcase with no shelves filled with wood. I then looked at where I had my wood and saw that I had a nook to put something like that in. The photo of the shelves with only a little wood is all the wood that was in the metal holder. I had a lot of space left.

After looking at various store for bookcases and shelving, hoping in vain that I could find something cheep that would fit the size I needed, I came to see what plans I could use from Ana's site. I looked at the cube tower and the locker cabinet and finally used the pdf from the locker cab resized to fit my needs.

My wife remembered seeing something about banding on here,( http://ana-white.com/2013/11/momplex/finishing-plywood-edges-edge-bandi… ) So we found some white to match the wood. I think the banding turned out good.

I did have a hard time getting the drill in to the pocket holes for the second side of shelf. I started to look on line and found 3" bits at Lowes and HD, but it was 10:30 at night. After looking some more I found a great post on Kreg's site for using a ratchet with a 1/4" socket to hold the bit. http://kregjig.ning.com/photo/ratchetasrtangledriver-1?context=user

My wife also said I should add one more shelf for keeping the wood stable. I told her that I would be fine. Now that I have filled it up all the way I think another shelf would be good to keep the wood rotated. Have one stack of room temp wood, and one of just from outside trying to warm up. So she was right that I should put in another shelf. ;)

I think it has opened the space by the fire place and should help my daughter not to stub her toes like she did with the rack.

The wood was $30 and HD cut if for no charge. It only took one sheet. The banding was around $5 and I had to buy some more Kreg screws.

The Size is 12 1/2"W 18"D and 79" high.

The blue bag under the shelving is an Ikea bag. It is just the right size and strength to carry the wood in.
Mike

A friend who has a photog service on the side said she needed a bench for group photos. Selected this modern farm bench and it has been a great hit. I did not make any changes in the design. Took a day and about $20 in lumber. Sorry for the photo clarity or lack thereof, I have several orders from her family members but I need to get on with my projects.

This is my first project and I've spent a couple of months preparing for it. My wife loved the plans for this bed and I loved the challenge. I reviewed the plans for both the king and queen size beds and read through all of the comments before starting. The comments were especially helpful, so thanks to everyone for contributing. I took my time with project hoping to minimize beginner mistakes. We recently upgraded to a king sized mattress and already had a bed frame (we highly recommend this one)

So I adjusted the plans for making just the headboard and footboard along with the runners. I omitted the 1x3 boards to account for orienting our king bed so that it is 76" wide and 80" long. Initially, I made the mistake of thinking that 1x6 boards would be adequate for runners. But that wouldn't withstand the constant onslaught of our kids climbing into our bed, so I switched to 2x6 boards and it's much sturdier. I cut the runners 3" longer than the bed frame to allow for room for the bedding and to account for the 1" overlap from the 2x6 cap on the footboard. L brackets were perfect for attaching them to the headboard and footboard. Now that this is under my belt I'm looking forward to my next project.

This is an adapted plan from the:

Chunky X Base Table

http://www.ana-white.com/2016/02/free_plans/chunky-x-base-table-featuri…

I made it counter height, made it skinnier at 27" depth and really long at 72" long.

Used Ana's doll high chair plans. Modified the tray with a curved hinged tray. Painted in her favorited color!

This was my first attempt at building actual furniture. It went pretty well I think. I followed the plan pretty much. I made the bench longer and taller. I also added a few inches to the height if the hutch.
A couple other changes I made that I thought it needed was 2x2 bracing on the bottom if the bench for stability. I also added a band of 1x2 to the bottom of the hutch so I could screw the hutch to the bench without having to go inside of the bench and try to line it up .
I then added another board to the top band of the hutch, because with the one small board there it want wide enough to mount a decent size hook to.
That's pretty much it. If you have any questions, let me know.

Great first project!

I saw Ana's Laundry Basket Dresser & thought it was an awesome idea, I am notorious for not folding the clean laundry for weeks & our new puppy likes to steal the clean socks & in the process pulls out other clothing all over the closet floor. I plan to build two of the basket dressers & then space them apart & add a top to them to make it like a folding table with the basket storage built into it but that involves a trip to Lowes. This project also gave me the best idea for tidying up our mudroom. Our local trash/recycling company decided 6 months ago to go to an every other week pick up schedule for recycling, with an every week pick up we only had a bin & a half, very managable & tidy. Now with every other week pick up somehow we generate 4 bins! As you can imagine, even with breaking down cardborad & nealty placing items in the bins, it gets messy & looks awful & this is the main way people enter our home. So after seeing this dresser project I got the idea to just adjust the plans to fit our bins. I also only had a single sheet of plywood & limited space so I tweaked the design from Ana's plan to accomodate my needs & materials. Now our bins are contained & the bin dresser doubles as a large table where we can put down the groceries when we get home from shopping! While I put it down as a weekend project, I only did so because I spread out the work over two days because I wanted to give the paint time to dry, I like to paint & stain my Projects before assembling as it's easier to get full coverage & I don't end up with dificult to paint knooks & cranies.

Using only scraps from all my other projects, I modified Ana's plans to create this workspace in the house we just moved into. I changed the dimensions of the shelves to take advantage of the materials I had on hand. Additionally, though I have a lot of different things on the shelves in this picture, I'll be using the shelves more for books and reference materials, so I needed standard shelf sizes. Though this is a simple design, cutting some of the angles and installing the shelves was a bit tricky, therefore I think this is more of an intermedite project. I also added 2x4 legs to support my Mac. Can't have that tumbling to the ground!

Living room console. Three-quarter inch birch ply, and one by two clear grain pine.

This is my third project from this site (ok, third project EVER). I was coming on to look for doll bed plans, and the Rustic X Console showed up on my screen....I loved it instantly, and knew I had to try it. My husband ran out and picked up a Kreg Jig for me, and we spent a couple evenings on it. Had lots of fun, though now I know why Ana says to make sure you buy straight boards--the middle shelves were not straight, and that was frustrating to work with but we made it work! Now I just need to figure out what I'll be using it for.

I loved this coffee table plan. I found it on www.morelikehome.net and also linked on Ana White's page. My wife and I loved the size and also the number of drawers for storage. I would say that the plans were great and I had to only make minor adjustments due to my own errors.

It took me about four days to complete. I used the Kreg jig to complete most of the joining. I put it all together by the end of the second day. It is solid as a rock. The last two days were mostly staining all pieces and then restaining to get the right finish. It also took a couple more weeks to find pulls and get them installed. But now it's all done and we love it already!