Community Brag Posts

I work for a large manufacturing company that frequently has 'desirable trash'. Found 3 beautiful, heavy-duty pallets with beautiful wood on them. Took them home, took them apart, and got to work. The wife had been wanting a swing out near our children's playset so she could sit and watch them. Used Kreg pocket holes for everything that I could so as to hide as much hardware as possible.

*Side note regarding why I did the rope the way I did - the original post had mentions of it being a bit tipsy (particularly with little ones!). With this design, there's no flip front or back and the rope only gets tighter the more weight that is applied.

We have been in need of a place to store our horse tack for several years, and finally got around to it. We modified the small cedar shed with a little extra support and added saddle racks and bridle hooks. Super pleased with how it turned out!

I have a large, square ottoman in my family room that looked empty and I didn't have anywhere to put a drink. The cheapest tray I could find that was large enough was $80 and it was damaged! So I slapped some boards together, and this is what I got. I love it! I joined a few boards together for the bottom, using my Kreg Jig, and attached a frame of 1x3's around the perimeter (I mitred the corners).

Modified the original plan a bit.

- Instead of using a wire door I used a board instead to give it a more closed look.
- Attached a mirror to the inside of the door
- Attached lots of hooks on the top piece of wood to hang more necklaces
- added a magnetic catch at the bottom and a rubber stopper at the top to ensure the door closes evenly and holds
- attached to dry wall with 4 toggle bolts

I am so ridiculously proud of myself... This was my first wood building project and now I think I'm addicted !!!! Next project a bookshelf!!

This project took me a lot longer than I wanted, but I love it. I worked a few hours each day and it seems I had to stop because I forgot one thing or another. I changed the way the top looked, I wanted to work with angles, so I framed out a 1x6 with two rows of mitered 1x4. It turned out better than I hoped, but I don't know if I will work with angles again... Like the plan says, it is HUGE!!!

My mom purchased a bunk bed set for my children at her house but since they were only 1 and 2 at the time, we separated them and used the rails on my sons single bed, then my daughters we converted into a twin size crib

Loved doing this build, I have been thinking of making these for a while.

Based off of a few of the comments I read, I modified the plans a little bit. Instead of using three 2 x 6s for the benches, I used two 2x4s with one 2 x 6 in the centre. Shortened up the bench support length by 3" to make up for the difference. This allowed for a smaller seat, which is easier to get in and out of when in table mode, but still plenty to sit on when used as a bench.

I am trying to come up with an alternate system for pinning the table in each position. I have found that after only a few uses, the table has some wiggle in the top, most likely from the bolts going in and out repeatedly. I would love some ideas on how to get these to hold nice and snug when in each position!

I posted a few pictures of these on my Facebook page, where I now have been asked how much I am selling them for and have about 3 orders already placed! Looks like the spring will be busier than expected!

We were looking for beds that had storage that would fit into our twin girls' small bedroom. This was to be their first "big girl" beds. Well, I spied some that would have cost us about $2100 to buy. No thanks. Then I found these plans. My husband looked at them, said "I can do that no problem". It took him over a week to build the beds, but he spent a lot of time getting "help" from the twins. Even without the distraction, he says it probably would have taken him longer than a weekend. The beds are very solid, and he says the plans were very easy to follow. The beds look great, the girls love them, and we've gotten a lot of compliments, including from a friend who works in the Pottery Barn executive offices. This was our first time using plans from Ana, but I'm already looking for our next project.

End table modified slightly so that the underside area serves as a Dog Crate. Used Plexiglass on the X sides and other parts from a portable dog crate for the front and back. Also, leather corners add a Hunting/outdoor feel.

This was a true joy to build. I plan on making at least three to four more of these. Couple tips I learned though: I used pocket hole screw where I could to prevent drilling so many holes that would need to be filled: Ft board, Rear boards, and a couple others. Also I routed the edge of the very front board where the child's legs will be dangling from, as well as the inside/outside edges of the arm rests. Smoother the better I thought with little kids. Lastly, I painted all the boards and then put it together as recommended. However, I would go through the plans and only paint the surfaces that you know will either touch and will be difficult to get to or sides that won't be drilled out; unless you don't plan on filling the holes and painting over them. It will save you paint and time if you plan out what sides of what boards you'll paint first than doing them all at once.

Farm Table 2 benches. Wood is Poplar

This is huge and fits perfectly in my previously lonely naked hallway.
I also made a smaller one as a Christmas present and it has received many compliments!

This was my 4th build, and only took a few weekends to do, working on it a few hours at a time each day. Pretty easy, though I didn't include the X braces on the sides due to miscutting them (just got the angles backwards). I used Minwax Provincial and Minwax polyurethane. Excuse the mess in the photos.