Community Brag Posts

This bed was made from fence scraps and leftovers and one pallet. The only pieces I bought were the 2x6's! I love how it turned out!

I truly enjoyed using these plans to make this project mostly because I made it with wood that I got from a friend and reclaimed from other projects.  The top of my desk is made with reclaimed 3/4 X 5 1/2 that wanted to curl and twist when I glued them together but after sanding and finishing they came out great and add a lot of character to the overall project.

Shiplap inspired headboard.

To build my Rustic X coffee table I went about it as cheap as I could. I found all of my wood either through crap piles at lumber yards or from free wood piles on craigslist. The interesting part was trying to find the pieces for the top which I had to improvise with the two 2x3 pieces in the middle of the four 2x6's also instead of using the two 1x42x12 pieces for the bottom shelf I could not find what was asked for so I used a few 1x4's which worked out great. The only other change I made to the plans was to change how the X's attached to the main frame. The original plans wanted the X's to butt up against the sides while I cut them to be flush with the top and bottom of the frame.
The only things that I purchased were the bracers, steel wool and vinegar and tea for the stain, and the screws. The only tools I own are a measuring tape and a pencil, luckily I have a friend with a full woodshop who helped me out. I followed the instructions on http://thefriendlyhome.blogspot.com/2012/07/how-to-oxidize-wood.html to make the stain. I left a wad of steel wool in white vinegar (about 2/3 of a pasta sauce jar full) for about 5 weeks. After all the cuts had been made and the table put together I sanded it by hand and then stained it. After the stain had dried I waxed the surface with Minwax paste finishing wax. I would love to enjoy my table but for lack of room in my 160 foot dorm room I've had to leave it in a friends apartment for now.

I took the plans for the indutrial cart and modified them just a little. I needed a shelf, not a cart, so I left the casters off and I made mine 4 feet tall and 5 feet wide. I just had the guys at Lowes cut some 2x12x10's in half for me and the metal angles were already 4 feet long, so I didn't even have to cut them! 

Built this for my wife. Had to modify the dimensions. She wanted it to be 36" tall and 80" long.

Thank you for the idea for the rustic x end table. My wife is extremely happy with her new end table. Happy wife = happy life!!! I constructed the end table of 2x4 douglas fir rough sawn material I salvaged from a project where we removed a trellis from the house. My son helped me remove all of the nails and we let the wood dry out from the rain. I cut the 2x4 to the lengths described in the directions (I had to modify the x braces in length), sanded the wood and applied natural finish stain. We also added 3 coats of polyurethane to the table top to give it a nice finish and hopefully help with wear and tear over the years.

I modified the plans (took out the top set of drawers) to make it a little shorter so my daughter can climb on it easier.

We live in a termite infested area and as such were nervous about putting wood in contact with the ground. We modified these plans to sit on top of a welded bar frame that is moveable and stands a meter high. The measurements are custom to our welded frame but the shape was based on these plans as was the construction process followed. We dont have a worry about predators so have used a design that doen not have a closed floor - our girls can simply fly or walk up the ladder to the roost and are able to leave the coop when ready in the morning without us opening doors. We are also in a warm environment thus an enclosed coop is not needed.

So far they are happy and are happily laying in the two egg boxes (We left the remaining space closed internally so that we can use it for storage) and as there is no bottom to the coop they poop straight into the run and onto the sand floor.

They are not free ranging yet as we are nervous of our dogs chasing them but once we are happy to let them free range we will use the gate built into the welded run.

Thank you Ana and lady goats for this design - I spent hours (and hours) researching and reading and looking at coop designs before deciding that this cute number was the one we wanted.

From me and my happy hens, thanks again!

Industrial Farmhouse Base

Rustic X Coffee Table. Stain is wet in the photo, so a bit glossier than I'm anticipating. Kept diagonal "X" cross-beams whole and staggered to create more depth in the look of the structure. One coat Minwax "Ipswitch Pine." Changed mind and went with 2-3 more of Minwax "Driftwood." Would have been more grey, less red had I gone with "Driftwood" from the start.

I scaled this 1 foot long coffin from a full size version I saw online.  I built two versions – see drawing links.  The first one (documented below) is from purchased craft wood which was clean and straight.  The second version was built from scrap pallets.   I’ve also included a quick video of the build along with PDF versions of the plans.

Build Instructions:

http://www.instructables.com/id/Mini-Coffin/

Video:

http://youtu.be/Rnwt6G7evgA

We LOVE how functional this toy bin is!! My husband built it in 3 hours, and then the stain took me 2 days (typical the finishing stain takes the most time! Ha ha) I did a 4 step process after looking at dozens of websites of how to stain- since we used pine board I didn't want the grain to stand out as much. 1: homemade vinegar solution stain 2: rustoleum weathered grain stain 3: minwax special walnut 4: 3 coats of poly 

I found the label holders at houseofantiquehardware.com 

Slightly modified version - Guido

Used cedar wood so I applied a few costs of oil based polyurethane to compensate for the softness of the wood.