Wine rack
First project for me. Easy to do even with limited tools. Now I realize I need more tools to do bigger and better. It was a nice stress relief to go to garage and build something. My wife wanted something so it made sense to do this.
First project for me. Easy to do even with limited tools. Now I realize I need more tools to do bigger and better. It was a nice stress relief to go to garage and build something. My wife wanted something so it made sense to do this.
Built this
Thu, 03/03/2016 - 12:18
it's a platform bed, I accidentally typed poster bed
Modified version of the $40 Hall Tree
Had to reduce the width to 36" to fit into this specific nook that is just inside the door from our garage. We've used it as a kick off place for our shoes. Having nothing else there was a waste of wall space that could be additionally utilized. We have a closet just up the hallway for most of our coats, but with winter coming and struggling with our oldest finding his coat and backpack every morning to leave for school, we wanted to designate a spot for him to use.
With that said, the space still had to be functional for all of us, and having to crawl under and find the lil girl's 'lost' tiny shoe/s way in the back under the bench was going to be a no-go for my knees. To remedy that, I decided to modify the bench to lift up to find those lost items (see pics). This required removing the front cross beam and creating squared off supports on each side instead of just 'legs'.
Before hooks, stain, and the 30" piano hinge, this project came in just under $25.
Total completed project was closer to $65 for all materials.
{Apologies if the full length shots look a little wonky/bowed. Getting a full shot was tough with my back against the wall, literally. :) Had to use the pano mode.}
Ana, you're the BEST!! Thank you so much for sharing these plans. This was a very simple build ... my problem was trying to decide how to paint and decorate it. There's a lady in our little town that cut out the letters for me. I think it turned out so cute. I'm working on a Christmas collection for our church auction next April and thought it would be fun to have Christmas in April :-). Thanks again Ana!!!
I modified the Salsa console table plans a little for my version. Assembly is pretty much the same, just added more detail like making 5 piece doors and draw fronts, adding back brackets to allow for cedar paneling behind the doors and recessed the middle walls so the doors close on them instead of inside the opening. The center will remain open for now.
the whole table and parts are poplar, minus the drawer bottoms which are beech ply. Because its made out of poplar, it jacked the price quite a bit. However, i wouldn't consider using anything less then select pine to make this table which is only slightly less that poplar. The #2 pine is total crap and not suitable to build a piece of furniture out of. Anyway, I've got about $300-$350 in building supplies (wood, screws/plugs, finish), and about $80 in hardware (hidden euro hinges and bearing drawer slides).
Hope you like it, as i am quite proud of it!
One other thing, if you plan on building this table, double check the material & cut lists. I found discrepancies.
My husband and I built this for our son for Christmas. We had so much fun doing this and all the detail that went into it. Both the fridge and stove have battery operated motion sensor lights & the backsplash is diamond plating. Very cool!
took me prob 6 hours to build 2 hours to oxidize 1 hour to oil. No bolts are brackets yet, I really love it without! This was my first piece of furniture and first time oxidizing & oiling!
I LOVE LOVE LOVE this site! I basically made this bed in one weekend. My first furniture build. I'm a 51 yo female and did this all by myself! Instructions clear. Buy and cut sheets are the best! The bed turned out so great, I an absolutely thrilled! PS, the nightstand I did by myself too. The plans are here on Ana White as well!!!
Flower potting bench for the front porch.
Mar
I needed something to fill an empty wall in my kitchen. I wanted something for both baking and wine storage so I modified a couple of things I saw on this website. Wine storage on the very bottom (the slats are wide enough apart that the wine bottles sit in the cracks and stay snug) with baking stuff above that. I think I'll build a matching shelf or two for the wall above it
Fri, 07/06/2012 - 15:17
I want to build a kitchen island and yours is very nice. Great Job!
Mon, 02/25/2013 - 11:22
What kind of material did you use for the table legs? Looks like 4x4?
I built this stool for my 2 yr old grandson. Added yardsticks to the top of the steps for a different look, and painted the stool, then sanded randomly, added stain and wiped off for an aged look.
Quick build for the garden swing.
Just saw on instagram that no one bragged about this plan yet. We did order the swing online, but built the outdoor room from your plan. We did put our support posts in concrete, very windy here. Just waiting for the roses to grow up the sides. Thank you for making it easy with your plan.
Bill and Maryann Tate
Wed, 08/02/2023 - 16:18
Thanks so much for sharing and adding this project to our brag board, it looks so great!
I really don't know where I got the inspiration for this shelf. We went to a primitive collections store a couple of weeks ago and I found this cool window off of a 1920's house. A couple of issues you run into with this is: 1. Windows from this time used leaded paint to paint there windows, so make sure when you sand you are in a well ventilated area. 2. Finding a window with no broken glass. Once you get all this the it's pretty easy to build. This is pretty much a backwards version of the media shelf with the door up top and the shelf on the bottom
My first project! Dragged home some pallets and out came this. Theoretically, you could really do this in less time than I did but I had to customize it to fit it in the space that I wanted. I also took a lot of time sanding, as I was deathly afraid of getting splinters!
Mon, 01/13/2014 - 23:43
this is exactly what I want to build! thank you for idea!
We love Ana White plans. One of our customers wanted the end tables and coffee table and a similar tv stand but to fit in a corner. I took the Rustic X concept and started creating! My Friend RogueEngineer liked it so much that he reverse designed it and made plans. Such talent out there in the DIY world!
On this project which I use from Ana White designs, I learned how to cut at an angle and I learned what wood too use to get the look you want. I also just wanted to say thank you for showing us diyer how to feel confident about building and using our hands. It is a good therapy, woodworking and creating.
The wood is all made from reclaimed Hurricane Micheal timbers that I cleaned, sanded, detailed, sanded again, painted, stained, and clear coat.
Even though the wood was used and free, it still has a process upon completion
We modified the plans because I had a specific idea of what I wanted and we needed a king size bed. We are so proud. We used left over foam from a previous project and covered it with the faux leather for the back rests. Because I love the look of dust ruffles but couldnt use it because of the slats to support the bed I cut out the material from which the dust ruffle is sewn and attached velcro to it and then to the bed and I got the look I wanted. Ana is awesome!
My daughter is OBSESSED with trains and I've been yearning to make a project from ana's page for YEARS. This was a perfect opportunity to start my first project and I'm pretty proud of myself with the results!
I scouted out wood for a few weeks and bought all my 1x6's and 1x3's at a discount wood place and the 1x2's were on sale at Home Depot for .80 cents a pop. All cuts were free cuts with the 'big machines' at the lumber shops.
I used pocket holes to attach the frame and the frame to the bottom plywood and plugged the holes.
I hand sanded all the wood before building and then at a finer grade after and finer still between finish coats.
Wood conditioned and stained in English Chestnut (2 coats) and 3 coats of high gloss clear finish over a period of 3 days. All Minwax.
Aside from a few wonky pocket hole screws going through the other side (my first time using a kreg is this project) and having to fix 'em, this was a pretty easy/fun project to do. My 2 year old helped plug holes and sand a little.
The flip-side of the shiny stained table top is a chalkboard which has been a HUGE hit because it is almost tripple the size kiddo has been drawing with and it's pretty nice. The chalkboard paint was the latex stuff found in home-depot...some can be coloured but i went with standard black.
Such a great and easy build, from start to finish. Thanks for another great plan!
Although this sofa is designed for the outdoors I built 2 of them to use in an office space. The plans were spot on and made it so easy to build even as a beginner.