Community Brag Posts
Modern Queen Headboard
![](/sites/default/files/051301_0812%5B03%5D_0.jpg)
I built this headboard using the Outdoor Canopy Daybed plans for the sides. You could do it either way using the sides or back. I did modify it a little; had to make it 60" wide and 30" tall, then I just added 22" tall legs to get the height I wanted. Over all dimensions are a simple 60" wide X 52" tall. This one is made with 1 x 4's I had left over from a closet tear out project. It didn't cost me one single penny! I had the paint left over from another project. I simply squared it up with the top and bottom boards and then laid in the rest. For a more modern look I began board spacing at 3/4" then went to 1" on the next, 1 1/2" and so on... I loved building this. I have gone without a headboard for 2 long years. I was waiting for one to catch my eye, and it never happened, Until I found this site. Ana you have inspired me to take charge of my own home again. For years I'd study the "wishbooks" from Crate & Barrel and Pottery Barn drooling over what I wish I could afford. You have made it possible for EVERYONE to have the home they've always wanted. You have also inspired people to actually put forth effort for what they desire and to work for that goal. You are a God-send. Thank You so much!!!
P.S. I also built a Toddler Bed and will be posting it as well.
![](/sites/default/files/051301_0812%5B03%5D.jpg)
![](/sites/default/files/051301_0812%5B01%5D.jpg)
I made a chair!
![](/sites/default/files/image_942.jpg)
I needed a couple of chairs to go with the Farmhouse Table and bench I made, but it made me ill to spend more on chairs than on the table and bench! So I thought I'd give this chair a try. I figured if it didn't turn out, at least I hadn't spent much to try (around $8 because I had a scrap of plywood). Boy, did it turn out! I modified the pattern by taking 2" off the front to back measurements and the side to side measurements. I used 3 1x4s for the back, and 3/4" plywood for the seat, and I didn't add the bottom rungs because I'd like the option of putting it over the cross supports on the farmhouse table. I sanded the tar out of the plywood, because with 5 kids, upholstering these chairs would be a joke. Primed and painted in colonial red.
Rustic end table pet kennel
![](/sites/default/files/DA479ECC-CC61-4AF6-B144-A364C7BC2C01_0.jpeg)
I was able to take the end table plan and modify it slightly to accommodate the kennal. I added the detail to the sides using a couple 2x2. The for door and rear I made a frame and then cut down some wire shelving. I think it turned out quite nice. Now the dog has a good place to sleep and I don’t have to have an ugly kennal in my great room.
![](/sites/default/files/F4824BAE-FFBF-4AB5-ACE6-ADC73F340275_0.jpeg)
![](/sites/default/files/DA479ECC-CC61-4AF6-B144-A364C7BC2C01_1.jpeg)
Comments
Tue, 02/07/2023 - 13:55
Beautiful adaptation!
Better than anything you could ever buy! Thank you for sharing, it looks awesome.
My First Project-Outdoor Bar-height Table
![](/sites/default/files/25539_379866874884_501734884_3585487_7672826_n.jpg)
The fist project I tried was this console table. I wanted something bar-height for outside entertaining. It's not perfect, but it's still standing! :)
![](/sites/default/files/25539_379866389884_501734884_3585484_4417801_n.jpg)
chalkboard crate
I changed the measurements in order for it to fit perfectly into the expedit unit. So easy, I will definitely be making more. Thanks once again Ana.
![](/sites/default/files/3154830160_1373590057.jpg)
![](/sites/default/files/3154830159_1373590057.jpg)
Comments
Fri, 07/12/2013 - 15:42
I love the clean, natural
I love the clean, natural look of this crate. :) Definite contender in solving my problem of having a lack of baskets and bins.
In reply to I love the clean, natural by yurra-bazain
Sat, 07/13/2013 - 13:20
Thanks Yvonne.
Thanks Yvonne.
King of Beds, no shims
Built using birch as the main wood for the headboard and footboard, everything else is pine. Turned out great!
Tiny house MIL unit
Ever since I saw the "wild rose" I knew it was the one I would build for my mom. I wanted a tiny house she would not have to climb a loft for her bedroom and still fit everything she would need. This is a brilliant layout! Many family, friends, and strangers donated money, time, appliances, and windows to get this house built. My husband and I have been finishing it up ourselves with some professional help in between since September and just put the appliances in today. Tomorrow the sink and counter-it's really happening, pinch me I'm dreaming! Thank you Ana & family, I can't imagine what kind of house my mom would have ended up with without your help. This was a really easy and fun build. Thank you so much!
![](/sites/default/files/0153e1e13915ee7ebc4accf8ec77062bb26079b465.jpg)
5 months
Rustic X Coffee Table
![](/sites/default/files/received_445242460605147_0.jpeg)
Had fun with this build. Love how large this table is. Gives me a place to put my feet up and there is still room for the kids to play with Legos. Lots of storage space underneath.
Finished with Varathane Golden Oak with Minwax Ebony lowlights.
![](/sites/default/files/received_958017368163518_0.jpeg)
![](/sites/default/files/received_4559635867418255_0.jpeg)
Comments
Wed, 01/19/2022 - 12:29
Nice coffee table!
Great job on the build and finish choice! Thanks for sharing:)
Flat Wall Bookholders
![](/sites/default/files/4dd5d67beddc6c06320047ed.jpg)
This was my first project and gave me the "umph" to get started as a builder. I loved them in Pottery Barn, but didn't feel good about how expensive they were to buy. So I bought a jigsaw and made two of these. One for each of my boys. I did the large size and I love them! They are a really pretty blue and hold a ton of books and were fun to make. I think I will make more for gifts and for our homeschool room.
My First Project: Spinning DVD Rack
I was looking online for a spinning DVD rack to buy when I stumbled across a picture of a custom built rack. I decided to give it a try and this is the result. This is the first project I've done outside of basic shelves and it was a great learning experience. The overall fit and finish isn't quite where I'd like it to be but overall I think it turned out pretty well. I was able to find a 12" lazy Susan at a hardware store that supports over 300lbs and worked perfectly for this project.
I used pocket holes for the shelves, finishing nails for the top and screws for the bottom and lazy Susan. I also used pocket holes to attach the shelf backs and hid them behind the shelves. One thing I definitely won't use next time is spray paint/enamel. The finish isn't nearly as nice as I wanted and it cost far more than I was expecting.
This is also my first time using SketchUp and I'm really impressed with it. I've uploaded a copy of the plans.
Criticism and suggestions are appreciated.
-Dan
![](/sites/default/files/3154830267_1373771998.jpg)
![](/sites/default/files/3154830268_1373771998.jpg)
![](/sites/default/files/3154830269_1373771998.jpg)
Rust-Oleum Crystal Clear Enamel
Comments
Sun, 07/14/2013 - 11:35
Spinning DVD Shelf
I like this spinning DVD unit! Coincidentally, I just finished using spray enamel to redo some cupboard door handles. It's horrible stuff! I ended up sanding it off, and doing it over in flat black. I roughed up the edges with 180 grit to antique them a bit. Looks much better!
Sun, 02/12/2023 - 01:19
Can I get a design drawing for this piece?
Can I get a design drawing for this piece?
Woven Bench
![](/sites/default/files/WP_20150710_18_54_25_Pro.jpg)
Turned into a more time consuming project than I first envisioned. I think it turned out great as everyone seems to like it. Going with the two-toned design made the finishing much more difficult but produced good results.
primer and indoor/outdoor semi-gloss paint
Comments
My First Project!
![](/sites/default/files/27535939_10159888071445032_2037967181_o.jpg)
My husband and I just moved from an apartment to a house, the first place we've ever lived with a dining room! I knew I wanted to build a really special table for us and I LOVED this plan. It seemed straightforward enough, and my stepdad had all the tools in his workshop. So my stepdad, mom, and I built the table over the course of a weekend. It was SO fun and it looks perfect in our first little house!
![](/sites/default/files/27650247_10159888071140032_630689847_o.jpg)
![](/sites/default/files/27535354_10159888071260032_532837893_o.jpg)
Paper towel rack
![](/sites/default/files/920CCA22-8043-4C69-B327-1125BD73D2CD.jpeg)
Yea, I know these were posted way back in 2013, but I only recently found them. Was looking at some kitchen organization ideas and I knew I wanted to make a paper towel rack. I liked this idea and went with it. My variance from original was to use a dowel rod for the paper towel holder and I cut 45 degree angles in place of the radius.
Comments
Sat, 01/29/2022 - 08:50
Awesome organization!
So glad you found it and built it! Thanks for sharing:)
Breakfast Nook
![](/sites/default/files/3154830420_1373917322.jpg)
I made this breakfast nook by taking apart an old teak outdoor dining set, sanding all the boards, and turning the chairs into benches. For the full story and more pictures, please see my blog post on crunchyurbanites.blogspot.com entitled, Our Teak Breakfast Booth. Just click the link below to navigate to my blog. Happy Woodworking!
![](/sites/default/files/3154830421_1373917322.jpg)
![](/sites/default/files/3154830422_1373917322.jpg)
![](/sites/default/files/3154830423_1373917322.jpg)
Benches- Teak Oil
Made with 2x4s and barn wood top
![](/sites/default/files/coltable.jpg)
I made this table for my wife. The top is some oak barnwood attached with table buttons to allow for seasonal changes, and the bottom is two by fours resawn to fit. Thanks for sharing this plan!
Live Edge Table
![](/sites/default/files/61DEDD08-A78A-4D72-953B-68B7974E19A0_1_201_a_0.jpeg)
First attempt at Live Edge - I stubbled across this great slab.
Comments
$40 Farmhouse Bed
![](/sites/default/files/bed3.jpg)
We had been using my wife's great grandmother's bedroom set for years. It has become increasingly noisy and we were in the mood to change the style of our bed. Recently I had picked up 5-6 pallets to use and I befriended the manager of a sawmill. He let take scrap would from his burn pile and gave me 5 10-12 foot boards that were going to be also thrown out due to various problems. All the wood was pine and the only thing I had to purchase was wood filler, nails, screws, and stain. I used 2-2x4s instead of 4x4s and my bed frame was built with 1x6s, 5s, 7s. I just used what I had left over from the rest of my planks.
![](/sites/default/files/bed_3.jpg)
Comments
Ana White Admin
Tue, 01/04/2022 - 14:04
Awesome custom shelf!
Very nice, thank you for sharing, it looks fantastic!